A podman could not read logs written to journald properly, due to a tail config bug.
Added a system test to check this - since e2e tests don't like journald
Signed-off-by: Ashley Cui <acui@redhat.com>
At the top of each generated page, add a Synopsis table with:
PR number/name, and link to github
Author name(s)
Test name (fedora/ubuntu, rootless, etc)
Cirrus build ID (usually uninteresting)
Cirrus task ID (usu. important), with link to Cirrus
The value of $SPECIALMODE
This is all we can get from the Cirrus environment in
which logformatter runs; we can't get things like
cgroup manager or username that the test runs under.
Note that the table is at the top, which is usually
unseen because we autoscroll to the bottom on
page load. I tentatively think that top is a more
natural place for this info than bottom, but am
willing to listen to arguments against.
Also, one minor tweak: highlight podman commands in
the BATS output. The idea is to make it easier for the eye
to spot those, then copy/paste them to find a reproducer.
And, sigh, disable the new 'podman network create'
system test. It is flaking much too much.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Extend the system tests to test `podman untag $image` without further
arguments to force removing all tags from the image.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
change capabilities handling to reflect what docker does.
Bounding: set to caplist
Inheritable: set to caplist
Effective: if uid != 0 then clear; else set to caplist
Permitted: if uid != 0 then clear; else set to caplist
Ambient: clear
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In podman containers rm and podman images rm, the commands
exit with error code 1 if the object does not exists.
This PR implements similar functionality to volumes, networks, and Pods.
Similarly if volumes or Networks are in use by other containers, and return
exit code 2.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
New tests for podman run --tz=EXPLICIT and =local. Requires
updating our testimage by adding a fixed reference timestamp
to a known file path.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Obscure corner case in which 'podman run --pull=never alpine'
will actually pass *with no alpine image* if there's an
image named "myalpine". (i.e. a substring match, not full
string match). Fixed in #7770 but the tests that were added
there do not actually test that.
This adds a double-duty test for that as well as making
sure that 'run --pull=never SHORTNAME' (implicit :latest)
does not match our existing :YYYYMMDD image; then one
more quick test to make sure that if we tag as :latest,
the same --pull=never succeeds.
Signed-off-by: Ed Santiago <santiago@redhat.com>
- pause test: enable when rootless + cgroups v2
(was previously disabled for all rootless)
- run --pull: now works with podman-remote
(in #7647, thank you @jwhonce)
- various other run/volumes tests: try reenabling
It looks like #7195 was fixed (by #7451? I'm not
sure if I'm reading the conversation correctly).
Anyway, remove all the skip()s on 7195. Only time
will tell if it's really fixed)
Also:
- new test for podman image tree --whatrequires
(because TIL). Doesn't work with podman-remote.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The parse_table() helper has until now dumbly split lines
on every single '|' character. This prevents us from running
simple tests such as 'cgroupManager: (systemd|cgroupfs)'.
We now use an ugly but robust sed expression to split
on '|' but *only* when surrounded by spaces and/or beginning
or end of line. This is safe because, for readability, all
tables already keep the '|' symbols well separated from
table content.
Add tests. And, the whole reason behind this, add
an actual real test for cgroupManager and cgroupVersion.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Tests all (current) values for --log-driver=X, and one test
for invalid value. For those drivers that write a local
file (json-file, k8s-file), test that the file exists and
contains results of the expected form (timestamp, stdout,
'F' for 'F'ull line, and the expected string output.
For json-file, confirm that podman issues a "Choosing k8s-file"
warning (only on local. On podman-remote, the warning goes only
to the server's stderr).
Written in response to #7754 in which driver=json-file was
falling through to 'none' instead of 'k8s-file'.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This is very useful for debugging cgroups v2, especially on
rootless - we need to ensure people are correctly using systemd
cgroups in these cases.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Fix a bug when saving multi-image archives where the progress bars from
copying images was accidentally written to the archive and hence
corrupted it.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
- podman network create: new test
- podman pull by-sha + podman images -a (#7651)
- podman image mount: new test
- podman pod: --infra-image and --infra-command (#7167)
For convenience and robustness, build a new testimage
containing a custom file /home/podman/testimage-id
with contents YYYYMMDD (same as image tag). The
image-mount test checks that this file exists and
has the desired content. New testimage also includes
a dummy 'pause' executable, for testing pod infra.
Updates from testimage:20200902 to :20200917
Signed-off-by: Ed Santiago <santiago@redhat.com>
Record the user-specified "raw" image name in the SpecGenerator, so we
can pass it along to the config when creating a container. We need a
separate field as the image name in the generator may be set to the
ID of the previously pulled image - ultimately the cause of #7404.
Reverting the image name from the ID to the user input would not work
since "alpine" for pulling iterates over the search registries in the
registries.conf but looking up "alpine" normalizes to
"localhost/alpine".
Recording the raw-image name directly in the generator was the best of
the options I considered as no hidden magic from search registries or
normalizations (that may or may not change in the future) can interfere.
The auto-update backend enforces that the raw-image name is a
fully-qualified reference, so we need to worry about that in the front
end.
Fixes: #7407
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add new system check confirming that "podman foo -l arg"
throws an error; and fix lots of instances where code
was not doing this check.
I'll probably need to add something similar for --all but
that can wait.
Signed-off-by: Ed Santiago <santiago@redhat.com>
* Refactor/Rename channel.WriteCloser() to encapsulate the channel
* Refactor build endpoint to "live" stream buildah output channels
over API rather then buffering output
* Refactor bindings/tunnel build because endpoint changes
* building tar file now in bindings rather then depending on
caller
* Cleanup initiating extra image engine
* Remove setting fields to zero values (less noise in code)
* Update tests to support remote builds
Fixes#7136Fixes#7137
Signed-off-by: Jhon Honce <jhonce@redhat.com>
- run tests: better "skip" message for docker-archive test;
remove FIXME, document that podman-remote doesn't support it
- run tests: instrument the --conmon-pidfile test in hopes
of tracking down flake #7580: cross-check pidfile against
output of 'podman inspect', and add some debug messages
that will only be seen on test failure.
- load tests: the pipe test: save and load a temporary tag,
not $IMAGE. Primary reason is because of #7371, in which
'podman load' assigns a new image ID (instead of preserving
the saved one). This messes with our image management, and
it turns out to be nonfixable.
Signed-off-by: Ed Santiago <santiago@redhat.com>
After attaching to a container, we wait for the container to finish and
return its exit code. Waiting for the container may not always succeed,
for instance, when the container has been force removed by another
process. In such case, we have to look at the *last* container-exit
event.
Also refactor the `ContainerRun` method a bit to return early on errors
and de-spaghetti the code.
Enable the remote-disabled system test.
Fixes: #7117
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Invert the branch logic to match the comment. Docker seems to wait for
the container while Podman does not.
Enable the remote-disabled system test as well.
Fixes: #7135
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
There is no need to setup the image and container engine when calling
a command with subcommands since we only print a usage message.
e.g `podman`,`podman container`
This also allows the remote client to show the usage message on
these commands without a running endpoint. I added a test for this.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
CI and system tests currently pull some images from docker.io.
Eliminate that, by:
- building a custom image containing much of what we need
for testing; and
- copying other needed images to quay.io
(Reason: effective 2020-11-01 docker.io will limit the
number of image pulls).
The principal change is to create a new quay.io/libpod/testimage,
using the new test/system/build-testimage script, instead of
relying on quay.io/libpod/alpine_labels. We also switch to
using a hardcoded :YYYYMMDD tag, instead of :latest, in an
attempt to futureproof our CI. This image includes 'httpd'
from busybox-extras, which we use in our networking test
(previously we had to pull and run busybox from docker.io).
The testimage can and should be extended as needed for future
tests, e.g. adding test file content or other useful tools.
For the '--pull' tests which require actually pulling from
the registry, I've created an image with the same name but
tagged :00000000 so it will never be pulled by default.
Since this image is only used minimally, it's just busybox.
Unfortunately there remain two cases we cannot solve in
this tiny alpine-based image:
1) docker registry
2) systemd
For those, I've (manually) run:
podman pull [ docker.io/library/registry:2.7 | registry.fedoraproject.org/fedora:31 ]
podman tag !$ quay.io/...
podman push !$
...and amended the calling tests accordingly.
I've tried to make the the smallest reasonable diff, not the
smallest possible one. I hope it's a reasonable tradeoff.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The test that does 'adduser' in a keep-id container had a
really dumb bug: if the user running the test has UID 1000,
then podman itself (via keep-id) will add the "1000" passwd
entry, and the in-container "adduser" will allocate 1001,
making our test fail. This triggered in f31/f32 podman gating
tests, but (?!?) never in rawhide gating tests.
Solution: explicitly feed a UID to adduser. Make sure that
it's not the same as the UID of the current user.
Also (unrelated): fix a ridiculous "run mkdir || die". At
the time I wrote that I probably had no idea how BATS works.
Signed-off-by: Ed Santiago <santiago@redhat.com>
info, images, run, networking tests: remove some skip_if_remote()s
that were added in the varlink days. All of these tests now seem
to work with APIv2.
help test: check that first output line from 'podman --help'
is the program description (regression check for #7273).
load test: clean up stray images, rewrite test to make it conform
to existing convention. In the process, discover and file #7337
exec test (and networking): file #7360, and add FIXME comment
to skip()s suggesting evaluating those tests once that is fixed.
pod test: now that #6328 is fixed, use 'podman pod inspect --format'
instead of relying on jq
Various other tests: add an explanation of why test is disabled
so we can more easily distinguish "this will never be meaningful
under remote" vs "hey, doesn't work for now, but maybe someday".
Signed-off-by: Ed Santiago <santiago@redhat.com>
Some CI tests are hanging, timing out in 60 or 120 minutes.
I wonder if it's #7316, the bug where all podman commands
hang forever if NOTIFY_SOCKET is set?
Signed-off-by: Ed Santiago <santiago@redhat.com>
