Create two new createInit for checking if the cotnainer is initialized
correctly.
createContainer which creates the actual container and containerConfig
Also added libpodruntime.GetContainerRuntime to put common runtime code
into separate function.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
While this is not implemented yet, it is needed for working with existing
docker scripts.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1460
Approved by: mheon
When running lots of podman commands simultaneously we were able to get
into a deadlock situation. The updated containers/storage should fix this issue.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1454
Approved by: mheon
as of now, we do not want to build with device mapper because it cannot
handle parallel requests which would be common-place in podman.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1445
Approved by: mheon
when running podman's integration tests, we need to be able to understand
our environment because the podman command will differ as will the results.
there is no 100% way to know if we are in a container, but using a combination
of container= and checking /proc seemed reasonable for our test suite. non of this
code is run in podman proper.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1441
Approved by: mheon
This is an incomplete fix, as it would be best for the libpod library to be in charge of coordinating the container's dependencies on the infra container. A TODO was left as such. UTS is a special case, because the docker library that namespace handling is based off of doesn't recognize a UTS based on another container as valid, despite the library being able to handle it correctly. Thus, it is left in the old way.
Signed-off-by: haircommander <pehunt@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1347
Approved by: mheon
Use the new firewall code vendored from CNI to replace the
existing iptables rule addition handler we had in place. This
adds proper support for firewalld and should be much better at
interacting with the firewall.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1431
Approved by: baude
The upstream CNI project has a PR open for adding iptables and
firewalld support, but this has been stalled for the better part
of a year upstream.
On advice of several maintainers, we are vendoring this code into
libpod, to perform the relevant firewall configuration ourselves.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1431
Approved by: baude
With this change if an error is raised when fetching the size of the
image, the error string will be printed as the size (instead of
panicing). In this particular case, the error string is "unable to
determine size".
This fixes bug #1405
Signed-off-by: Steve Baker <sbaker@redhat.com>
Closes: #1423
Approved by: mheon
We should be sharing cgroups namespace by default in pods
uts namespace sharing was broken in pods.
Create a new libpod/pkg/namespaces for handling of namespace fields
in containers
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1418
Approved by: mheon
When there was a conflict between a user-added volume and a mount
already in the spec, we previously respected the mount already in
the spec and discarded the user-added mount. This is counter to
expected behavior - if I volume-mount /dev into the container, I
epxect it will override the default /dev in the container, and
not be ignored.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1419
Approved by: TomSweeneyRedHat
When user-specified volume mounts overlap with mounts already in
the spec, remove the mount in the spec to ensure there are no
conflicts.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1419
Approved by: TomSweeneyRedHat
podman build docs should now reflect that the --layers default value is true.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1424
Approved by: mheon
to more closely mimic docker default behavior, the --layers
cli option is set to true by default for podman. the buildah
environment variable of BUILDAH_LAYERS is still honored and will
override the command line input.
this should be considered in place of PR #1383.
Many thanks for Scott McCarty for inspiring this welcome change.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1422
Approved by: rhatdan
This bash script is meant to compliment the podman baseline
test script. It primarily focuses on exercising the common
actions of pods.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1421
Approved by: rhatdan
This tests fails a lot, I think because of a race condition. Changing to
just make sure the inode of the /dev/shm on the host is the same as inside
the container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1420
Approved by: mheon
Small amount of clean up on the baseline script to handle failing
on error. I also added an option to not use docker at all for platoforms
where docker cannot be installed.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1411
Approved by: rhatdan
Figuring out the difference between a User and a USERNS
as well as Cgroup and CGROUPNS
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1417
Approved by: TomSweeneyRedHat
When we create a pod that also has an infra container, we should
start the infra container automatically. This allows users to add
running containers to the pod immediately.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1415
Approved by: rhatdan
We need to vendor in the latest containerd/cgroups for a fix related to
slice delegation and systemd <= 239. The opencontainer/runtime-spec is
brought along for the ride.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1414
Approved by: mheon
Right now, we don't print errors from c/image while trying to
pull images. This prints the errors when log-level=debug is set
so we can debug errors while pulling.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Closes: #1409
Approved by: baude
Podman logs was not parsing CRI logs well, especially
the F and P logs. Now using the same parsing code as
in kube here.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1403
Approved by: rhatdan
When running podman rm -a on a storage where no images exist,
the exit code should NOT be non-zero.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1402
Approved by: rhatdan
change the tests to use chroot to set a numeric UID/GID.
Go syscall.Credential doesn't change the effective UID/GID of the
process.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1372
Approved by: mheon
also refactor the rootless_test.go to facilitate running a test in a
rootless context.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1372
Approved by: mheon
move re-exec later on, so that we can check whether we need to join
the infra container user namespace or we need to create another one.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1372
Approved by: mheon
be sure to be in an userns for a rootless process before initializing
the runtime. In case we are not running as uid==0, take advantage of
"podman info" that creates the runtime.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1372
Approved by: mheon
