The markdown-to-manpage sequence needs a long row of dashes,
not a single dash. A single dash, as used in this one option,
generates unreadable *roff.
Also, some tool somewhere doesn't like too-long columns. Shrtn thm.
Also, verify that there are no more three-or-fewer-dash columns:
$ ack '\|\s+-{1,3}\s' docs/source/markdown
Fixes: #19086
Signed-off-by: Ed Santiago <santiago@redhat.com>
GetKeepIDMapping never read the gid (as it intended) but reused the uid.
Most likely a typo that never bothered anybody as uid and gid usually
match.
Signed-off-by: Simon Brakhane <simon@brakhane.net>
When debugging #17403, the logs of sshd indicates that Podman tried to
ssh into the machine too soon as the `core` user has not yet been fully
set up:
> error: kex_exchange_identification: Connection closed by remote host
> fatal: Access denied for user core by PAM account configuration [preauth]
@dustymabe found that the we may have to wait for systemd-user sessions
to be up. Doing that reduces the flake rate on my M2 machine but does
not entirely fix the issue.
Since I have seen multiple symptoms of flakiness, I think it does not
hurt to add the systemd-user sessions to the dependencies of the ready
service and continue investigating.
[NO NEW TESTS NEEDED] - once we have a fix out, I want to exercise
frequent stop/start in the machine tests but they won't pass now.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This flag is not supported on BSD-derived systems including FreeBSD and
macos. We can get exactly the same symlink by passing the desired
relative path as source argument to 'ln -sf'.
Signed-off-by: Doug Rabson <dfr@rabson.org>
For pods with bridged and slirp4netns networking we create /etc/hosts
entries to make it more convenient for the containers to address each
other. We omitted to do this for pasta networking, however. Add the
necessary code to do this.
Closes: https://github.com/containers/podman/issues/17922
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Confirm that pasta test name agrees with the test being run.
This is a development-time-only check, it must never fail
beyond CI. The idea is to prevent something like
@test "... Single TCP ... IPv4" {
pasta_test_to 6 ... udp ...
}
Signed-off-by: Ed Santiago <santiago@redhat.com>
- typo fix, a misspelled variable resulting in test being NOP
- remove unnecessary variable (followup to #19044)
- add opportunistic CONTAINERS_CONF test (followup to #19032)
Signed-off-by: Ed Santiago <santiago@redhat.com>
This adds the 'system service' command to the build on FreeBSD and
suppresses the call to servicereaper.Start which is only needed to
support slirp4netns on Linux. A stub for compat.StatsContainer is also
added - stats are still supported via the libpod.StatsContainer API
call.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
With PR #14167, the pod-level security Context ID are supported, while the markdown says it isn't.
This patch fixes it.
```
None
```
Signed-off-by: Fabian Wiesel <fwiesel@users.noreply.github.com>
Make sure we use the config field to know if we should use pasta or
slirp4netns as default.
While at it fix broken code which sets the default at two different
places, also do not set in Validate() as this should not modify the
specgen IMO, so set it directly before that.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This reverts commit c2a24abc0d33cdb21681cfec63677ac29e92446c, which
itself reverted 1c08f2edac3f9ecf128cf8da91276e963e6ad14c, which
reverted e33f4e0bc7429038ba6aa82285ae8749c9037c88.
The original e33f4e0bc742 "pasta: Use two connections instead of three
in TCP range forward tests" was a workaround to avoid intermittent
errors in CI where the pasta networking port range forwarding tests
would fail. It was reverted and unreverted when we thought we'd fixed
the problem, but that turned out not to be the case.
We're now much more confident that we've genuinely found and fixed (or
at least, worked around) the underlying problem, so we revert it again.
Link: https://github.com/containers/podman/issues/17287
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With a number of the port range forwarding tests, we've seen occasional
failures where the sending socat fails with an EINTR on connect(). This
was mitigated by e33f4e0bc742 "pasta: Use two connections instead of three
in TCP range forward tests" (which has been reverted and un-reverted
several times). However, this did not eliminate the problem, for example
see [0].
For the failing tests we are using the socat address "EXEC:printf x" to
make socat invoke printf(1) to generate a single byte of data to transfer.
Closer analysis shows that the SIGCHLD as the printf process ends is
occasionally intersecting with the connect() call causing this failure.
This is arguably a bug in socat, to not handle this race one way or
another. However, we can easily workaround the problem by using a
temporary file with the data to transfer, rather than invoking printf every
time. Do this, to avoid the flakiness of these tests.
[0]
https://github.com/containers/podman/issues/17287#issuecomment-1611855165
Closes: https://github.com/containers/podman/issues/17287
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
https://github.com/containers/podman/pull/19021 fixed bugs with the pasta
networking tests not working on hosts with multiple interfaces. Alas, the
patch left in some stale code that generates spurious error messages for
the IPv6 case. This is sort of harmless - later code overrides what's done
here and the tests can pass anyway. However if a test fails for some other
reason it means we get a misleading irrelevant error message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is pretty complicated to display the secret on the host, but is
not really secured. This patch makes it easier to examine the secret.
Partial fix for https://github.com/containers/podman/issues/18667
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- build dnsname the old way otherwise it fails on koji
- use the binary path for go-md2man for successful ELN builds
[NO NEW TESTS NEEDED]
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
[October 2022] While mucking around in this test, I noticed that
a test was being unnecessarily skipped in rootless. Reason was,
test was creating a /etc/systemd file, which it really shouldn't
have been doing anyway.
[Flash forward to June 2023] Ugh. This got complicated, so I
abandoned it. But it's flaking in CI, so one focus-push later,
here's everything that this PR fixes:
- create systemd unit file in proper (safe) path.
- create it *with proper podman options!!!* As in, the
whole --this --that --root --tmpdir options! Sheesh!
- use a pseudorandom service name, not just "redis"
- invoke systemctl/journalctl with --system or --user
as appropriate.
- remove unnecessary "bash -c"
- remove SkipIfRootless, but add SkipIfRemote
Signed-off-by: Ed Santiago <santiago@redhat.com>
This adds define.BindOptions to declare the mount options for bind-like
mounts (nullfs on FreeBSD). Note: this mirrors identical declarations in
buildah and it may be preferable to use buildah's copies throughout
podman.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
