This matches Docker behavior more closely and should resolve an
issue we were seeing with /sys mounts
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1465
Approved by: rhatdan
Waiting uses a lot of CPU, so drop back to checking once/second
and allow user to pass in the interval.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This is an incomplete fix, as it would be best for the libpod library to be in charge of coordinating the container's dependencies on the infra container. A TODO was left as such. UTS is a special case, because the docker library that namespace handling is based off of doesn't recognize a UTS based on another container as valid, despite the library being able to handle it correctly. Thus, it is left in the old way.
Signed-off-by: haircommander <pehunt@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1347
Approved by: mheon
Use the new firewall code vendored from CNI to replace the
existing iptables rule addition handler we had in place. This
adds proper support for firewalld and should be much better at
interacting with the firewall.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1431
Approved by: baude
The upstream CNI project has a PR open for adding iptables and
firewalld support, but this has been stalled for the better part
of a year upstream.
On advice of several maintainers, we are vendoring this code into
libpod, to perform the relevant firewall configuration ourselves.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1431
Approved by: baude
We should be sharing cgroups namespace by default in pods
uts namespace sharing was broken in pods.
Create a new libpod/pkg/namespaces for handling of namespace fields
in containers
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1418
Approved by: mheon
When there was a conflict between a user-added volume and a mount
already in the spec, we previously respected the mount already in
the spec and discarded the user-added mount. This is counter to
expected behavior - if I volume-mount /dev into the container, I
epxect it will override the default /dev in the container, and
not be ignored.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1419
Approved by: TomSweeneyRedHat
When user-specified volume mounts overlap with mounts already in
the spec, remove the mount in the spec to ensure there are no
conflicts.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1419
Approved by: TomSweeneyRedHat
Podman logs was not parsing CRI logs well, especially
the F and P logs. Now using the same parsing code as
in kube here.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1403
Approved by: rhatdan
change the tests to use chroot to set a numeric UID/GID.
Go syscall.Credential doesn't change the effective UID/GID of the
process.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1372
Approved by: mheon
This will help document the defaults in podman build.
podman build --help will now show the defaults and mention
the environment variables that can be set to change them.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1364
Approved by: mheon
In the API docs, we generally state the type of error that should be returned
if a container or image cannot be found. In several cases, the code did not
match the API doc, when the API doc was correct.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1353
Approved by: rhatdan
Unfortunately this is not enough to get it working as runc doesn't
allow to bind mount /proc.
Depends on: https://github.com/opencontainers/runc/pull/1832
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1349
Approved by: rhatdan
Fix the test for checking when /sys must be bind mounted from the
host. It should be done only when userNS are enabled (the
!UsernsMode.IsHost() check is not enough for that).
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1349
Approved by: rhatdan
Manage the case where the main process of the container creates and
joins a new user namespace.
In this case we want to join only the first child in the new
hierarchy, which is the user namespace that was used to create the
container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1331
Approved by: rhatdan
We cannot re-exec into a new user namespace to gain privileges and
access an existing as the new namespace is not the owner of the
existing container.
"unshare" is used to join the user namespace of the target container.
The current implementation assumes that the main process of the
container didn't create a new user namespace.
Since in the setup phase we are not running with euid=0, we must skip
the setup for containers/storage.
Closes: https://github.com/containers/libpod/issues/1329
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1331
Approved by: rhatdan
Also it fix the issue of exposing both tc/udp port even if
only one proto specified.
Signed-off-by: Kunal Kushwaha <kushwaha_kunal_v7@lab.ntt.co.jp>
Closes: #1325
Approved by: mheon
I am often asked about the list of capabilities availabel to a container.
We should be listing this data in the inspect command for effective
capabilities and the bounding set.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1335
Approved by: TomSweeneyRedHat
As well as small style corrections, update pod_top_test to use CreatePod, and move handling of adding a container to the pod's namespace from container_internal_linux to libpod/option.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
This results in some functionality changes:
If a ErrCtrStateInvalid is returned to GetPodStats, the container is ommitted from the stats.
As such, if an empty slice of Container stats are returned to GetPodStats in varlink, an error will occur.
GetContainerStats will return the ErrCtrStateInvalid as well.
Finally, if ErrCtrStateInvalid is returned to the podman stats call, the container will be ommitted from the stats.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1319
Approved by: baude
When a non-nil process was used and a hook was set to match
always, this would not actually match. Fix this.
Fixes: #1308
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1311
Approved by: rhatdan
Devices are supposed to be able to be passed in via the form of
--device /dev/foo
--device /dev/foo:/dev/bar
--device /dev/foo:rwm
--device /dev/foo:/dev/bar:rwm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1299
Approved by: umohnani8
Do not set any hostname value in the OCI configuration when --uts=host
is used and the user didn't specify any value. This prevents an error
from the OCI runtime as it cannot set the hostname without a new UTS
namespace.
Differently, the HOSTNAME environment variable is always set. When
--uts=host is used, HOSTNAME gets the value from the host.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1280
Approved by: baude
To better reflect it's usage: to share functions between podman and varlink.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1275
Approved by: mheon
Need to get some small changes into libpod to pull back into buildah
to complete buildah transition.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1270
Approved by: mheon
We need to pass the image format OCI or docker in the varlink commit command.
Signed-off-by: Qi Wang <qiwan@redhat.com>
Closes: #1281
Approved by: mheon
Hostname should be set to the hosts hostname when network is none.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1274
Approved by: giuseppe
Use a pipe instead of a temporary file to load the apparmor profile.
This change has a measurable speed improvement for apparmor users.
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1262
Approved by: mheon
Move all Linux-related data under the corresponding buildtags to reduce
the memory footprint and speed up compilation for non-apparmor builds.
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1262
Approved by: mheon
