- images: confirm that 'podman images' emits headings
even if there are no images present. Intended to
replace e2e test which is difficult to get working
under podman-remote.
- build: add test for #8092, podman-build gobbling stdin.
Workaround needed for issues #8342 and #8343, in which
podman-remote output differs from podman local.
- volumes: add test for #8307, double-lock on same volume.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Check to see if we are recording the version of buildah
used to build the image as a label in the image.
Also we should make sure the filter "since" works.
We are only testing "after", which we don't document.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
(actually, on any system exhibiting the symptom wherein
journalctl fails due to insufficient permissions, which
for all practical purposes means only RHEL8)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Continue progress on use of external containers.
This PR adds the ability to mount, umount and list the
storage containers whether they are in libpod or not.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Most of the builtin golang functions like os.Stat and
os.Open report errors including the file system object
path. We should not wrap these errors and put the file path
in a second time, causing stuttering of errors when they
get presented to the user.
This patch tries to cleanup a bunch of these errors.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Containers that share IPC Namespaces share each others
/dev/shm, which means a private /dev/shm needs to be setup
for the infra container.
Added a system test and an e2e test to make sure the
/dev/shm is shared.
Fixes: https://github.com/containers/podman/issues/8181
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a new "image" mount type to `--mount`. The source of the mount is
the name or ID of an image. The destination is the path inside the
container. Image mounts further support an optional `rw,readwrite`
parameter which if set to "true" will yield the mount writable inside
the container. Note that no changes are propagated to the image mount
on the host (which in any case is read only).
Mounts are overlay mounts. To support read-only overlay mounts, vendor
a non-release version of Buildah.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When the OCI Runtime tries to set certain settings in cgroups
it can get the error "no such file or directory", the wrapper
ends up reporting a bogus error like:
```
Request Failed(Internal Server Error): open io.max: No such file or directory: OCI runtime command not found error
{"cause":"OCI runtime command not found error","message":"open io.max: No such file or directory: OCI runtime command not found error","response":500}
```
On first reading of this, you would think the OCI Runtime (crun or runc) were not found. But the error is actually reporting
message":"open io.max: No such file or directory
Which is what we want the user to concentrate on.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- run test: preserve --runtime test: use a random executable
path. And, clean up better.
- run test: "look up correct image name" test: use random
strings; test both without and with a :tag
- events test: use random label strings, add more filter tests
Signed-off-by: Ed Santiago <santiago@redhat.com>
adding the ability to filter evens by the container labels. this requires that container labels be added to the events data being recorded and subsequently read.
Signed-off-by: baude <bbaude@redhat.com>
Add a check step in podman run --log-driver test. Prefer to add
it here as it already has a loop to cover all different drivers
in this test.
Signed-off-by: Yiqiao Pu <ypu@redhat.com>
Detached containers and detach keys are only created with the podman run, i
exec, and start commands. We do not store the detach key sequence or the
detach flags in the database, nor does Docker. The current code was ignoreing
these fields but documenting that they can be used.
Fix podman create man page and --help output to no longer indicate that
--detach and --detach-keys works.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Record the correct image name when creating a container by using the
resolved image name if present. Otherwise, default to using the first
available name or an empty string in which case the image must have been
referenced by ID.
Fixes: #8082
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Want to have man pages match commands, since we have lots of printed
man pages with using Options, we will change the command line to use
Options in --help.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- apiv2 - the 'ten /info requests' test is flaking often,
taking ~8 seconds (our limit is 7, up from 5 a few weeks
ago). Brent suggested that the first /info call might be
expensive, because it needs to access storage. So, let's
prime it by running one /info outside the timing loop.
And, because even that continues to fail, bump it up
to 10 seconds and file #8076 to track the slowdown.
- toolbox test - WaitForReady() has timed out, even on one
occasion causing a run failure because it failed 3 times.
Solution: bump up timeout from 2s to 5s. Not really great,
but CI systems are underpowered, and it's not unreasonable
that 2s might be too low.
- sdnotify test - add a 'podman wait' between stop & rm.
This may prevent a "cannot rm container as it is running"
race condition.
While working on this, Brent and I noticed a few ways that
test-apiv2 logging can be improved:
- test name: when request is POST, display the jsonified
parameters, not the original input ones. This should
make it much easier to reproduce failures.
- use curl's "--write-out" option to capture http code,
content type, and request time. We were getting the
first two via grep from logged headers; this is cleaner.
And there was no other way to get timing. We now include
the timing as X-Response-Time in the log file.
- abort on *any* curl error, not just 7 (cannot connect).
Any error at all from curl is bad news.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The BATS 'run' directive is really quite obnoxious; for the
most part we really don't want to use it. Remove some uses
that snuck in last week, and remove one test (exists) that
can more naturally be piggybacked into an rm test.
While we're at it: in setup(), look for and delete stray
external (buildah) containers. This will be important if
any of the external-container tests fails; this way we
don't leave behind a state that causes subsequent tests
to fail.
Signed-off-by: Ed Santiago <santiago@redhat.com>
External containers are containers created outside of Podman.
For example Buildah and CRI-O Containers.
$ buildah from alpine
alpine-working-container
$ buildah run alpine-working-container touch /test
$ podman container exists --external alpine-working-container
$ podman container diff alpine-working-container
C /etc
A /test
Added --external flag to refer to external containers, rather then --storage.
Added --external for podman container exists and modified podman ps to use
--external rather then --storage. It was felt that --storage would confuse
the user into thinking about changing the storage driver or options.
--storage is still supported through the use of aliases.
Finally podman contianer diff, does not require the --external flag, since it
there is little change of users making the mistake, and would just be a pain
for the user to remember the flag.
podman container exists --external is required because it could fool scripts
that rely on the existance of a Podman container, and there is a potential
for a partial deletion of a container, which could mess up existing users.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Current these commands only check if a container exists in libpod. With
this fix, the commands will also check if they are in containers/storage.
This allows users to look at differences within a buildah or CRI-O container.
Currently buildah diff does not exists, so this helps out in that situation
as well as in CRI-O since the cri does not implement a diff command.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- run --userns=keep-id: confirm that $HOME gets set (#8013)
- inspect: confirm that JSON output is a sane number of
lines (10 or more), not an unreadable one-liner (#8011
and #8021). Do so with image, pod, network, volume
because the code paths might be different.
- cgroups: confirm that 'run' preserves cgroup manager (#7970)
- sdnotify: reenable tests, and hope CI doesn't hang. This
test was disabled on August 18 because CI jobs were hanging
and timing out. My suspicion was that it was #7316, which
in turn seems to have hinged on conmon #182. The latter
was merged on Sep 16, so let's cross our fingers and see
what happens.
Also: remove inaccurate warning from a networking test.
And, wow, fix is_cgroupsv2(), it has never actually worked.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Currenly if a user specifies the name or ID of an external storage
container, we report an error to them.
buildah from scratch
working-container-2
podman rm working-container-2
Error: no container with name or ID working-container-2 found: no such container
Since the user specified the correct name and the container is in storage we
force them to specify --storage to remove it. This is a bad experience for the
user.
This change will just remove the container from storage. If the container
is known by libpod, it will remove the container from libpod as well.
The podman rm --storage option has been deprecated, and removed from docs.
Also cleaned documented options that are not available to podman-remote.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- images test: add test for 'table' and '\t' formatting
- image mount test: check output from 'umount', test
repeat umount (NOP), and test invalid-umount
- kill test: remove kludgy workaround for crun signal bug
ref: #5004 -- code is no longer needed (fingers crossed),
and the workaround involved pulling an expensive image.
- selinux test: add new tests for shared context in:
* pods , w/ and w/o infra container (ref: #7902)
* containers with namespace sharing: --ipc, --pid, --net
- selinux test: new test for --pid=host (disabled pending
propagation of container-selinux-2.146, ref: #7939)
Signed-off-by: Ed Santiago <santiago@redhat.com>
A podman could not read logs written to journald properly, due to a tail config bug.
Added a system test to check this - since e2e tests don't like journald
Signed-off-by: Ashley Cui <acui@redhat.com>
At the top of each generated page, add a Synopsis table with:
PR number/name, and link to github
Author name(s)
Test name (fedora/ubuntu, rootless, etc)
Cirrus build ID (usually uninteresting)
Cirrus task ID (usu. important), with link to Cirrus
The value of $SPECIALMODE
This is all we can get from the Cirrus environment in
which logformatter runs; we can't get things like
cgroup manager or username that the test runs under.
Note that the table is at the top, which is usually
unseen because we autoscroll to the bottom on
page load. I tentatively think that top is a more
natural place for this info than bottom, but am
willing to listen to arguments against.
Also, one minor tweak: highlight podman commands in
the BATS output. The idea is to make it easier for the eye
to spot those, then copy/paste them to find a reproducer.
And, sigh, disable the new 'podman network create'
system test. It is flaking much too much.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Extend the system tests to test `podman untag $image` without further
arguments to force removing all tags from the image.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
change capabilities handling to reflect what docker does.
Bounding: set to caplist
Inheritable: set to caplist
Effective: if uid != 0 then clear; else set to caplist
Permitted: if uid != 0 then clear; else set to caplist
Ambient: clear
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In podman containers rm and podman images rm, the commands
exit with error code 1 if the object does not exists.
This PR implements similar functionality to volumes, networks, and Pods.
Similarly if volumes or Networks are in use by other containers, and return
exit code 2.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
New tests for podman run --tz=EXPLICIT and =local. Requires
updating our testimage by adding a fixed reference timestamp
to a known file path.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Obscure corner case in which 'podman run --pull=never alpine'
will actually pass *with no alpine image* if there's an
image named "myalpine". (i.e. a substring match, not full
string match). Fixed in #7770 but the tests that were added
there do not actually test that.
This adds a double-duty test for that as well as making
sure that 'run --pull=never SHORTNAME' (implicit :latest)
does not match our existing :YYYYMMDD image; then one
more quick test to make sure that if we tag as :latest,
the same --pull=never succeeds.
Signed-off-by: Ed Santiago <santiago@redhat.com>
- pause test: enable when rootless + cgroups v2
(was previously disabled for all rootless)
- run --pull: now works with podman-remote
(in #7647, thank you @jwhonce)
- various other run/volumes tests: try reenabling
It looks like #7195 was fixed (by #7451? I'm not
sure if I'm reading the conversation correctly).
Anyway, remove all the skip()s on 7195. Only time
will tell if it's really fixed)
Also:
- new test for podman image tree --whatrequires
(because TIL). Doesn't work with podman-remote.
Signed-off-by: Ed Santiago <santiago@redhat.com>
