Require the network to be online in all (generated) systemd units to
make sure that containers and Podman run only after the network has been
fully configured.
Fixes: #10655
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The `IgnorePlatform` options has been removed from the
`LookupImageOptions` in libimage to properly support multi-arch images.
Skip one buildah-bud test which requires updated CI images. This is
currently being done in github.com/containers/podman/pull/10829 but
we need to unblock merging common and buildah into podman.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Python tests were flaking because they behave differently
when $DEBUG is set. It looks like something in CI sets
that envariable.
Solution: do not use $DEBUG as a debug trigger, use a
properly-named custom variable that is unlikely to be
set accidentally.
Also: get rid of AssertTrue(), which gives no visibility
into what happened. Write in proper form that can emit
useful diagnostics on failure.
Fixes: #10948
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make sure that containers configured for auto removal
(e.g., via `podman create --rm`) are removed in `podman start`
if starting the container failed.
Fixes: #10935
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Adds the new --infra-name command line argument allowing users to define
the name of the infra container
Issue #10794
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
This makes sure, that the podman auto-update is not executed exactly at midnight for the same time always.
If many things do the same and many services use this keyword and react at midnight, this can cause a lot of stress to a server.
Thus, this adds a 900s/15min delay.
As [the arch wiki says](https://wiki.archlinux.org/title/Systemd/Timers#Realtime_timer):
> Special event expressions like daily and weekly refer to specific start times and thus any timers sharing such calendar events will start simultaneously. Timers sharing start events can cause poor system performance if the timers' services compete for system resources. The RandomizedDelaySec option in the [Timer] section avoids this problem by randomly staggering the start time of each timer. See systemd.timer(5).
Signed-off-by: rugk <rugk+git@posteo.de>
The multi-image load test was failing on non-x86_64 arch,
because the images used by the test (:00000000, :20200902)
did not have manifests for the given arch.
Solution: all we need are two nonlocal images. Use the
predefined NONLOCAL_IMAGE for one, and a new :multiimage
tag (manually created, currently == :20210610) for the other.
Document, so if/when RHEL adds new supported arches, the
test will fail but a maintainer will have a clue what to do.
Also, as long as I'm in here: add 'image prune -f' to teardown
in build.bats, to avoid seeing lots of red "stray image"
warnings in test logs.
Also: skip a broken/flaky python test
Signed-off-by: Ed Santiago <santiago@redhat.com>
added support for --pid flag. User can specify ns:file, pod, private, or host.
container returns an error since you cannot point the ns of the pods infra container
to a container outside of the pod.
Signed-off-by: cdoern <cdoern@redhat.com>
There was an race condition when calling `GetRootlessCNINetNs()`. It
created the rootless cni directory before it got locked. Therefore
another process could have called cleanup and removed this directory
before it was used resulting in errors. The lockfile got moved into the
XDG_RUNTIME_DIR directory to prevent a panic when the parent dir was
removed by cleanup.
Fixes#10930Fixes#10922
To make this even more robust `GetRootlessCNINetNs()` will now return
locked. This guarantees that we can run `Do()` after `GetRootlessCNINetNs()`
before another process could have called `Cleanup()` in between.
[NO TESTS NEEDED] CI is flaking, hopefully this will fix it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add a --dry-run flag to `podman auto-update` which will look for new
images but won't perform any pull or restart any service or container.
The "UPDATED" column will now indicate the availability of a newer image
via "pending".
```
$ podman auto-update --dry-run
UNIT CONTAINER IMAGE POLICY UPDATED
container-test.service 08fd34e533fd (test) localhost:5000/busybox registry false
```
Fixes: #9949
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fix issue 10929 : `[Regression in 3.2.0] CNI-in-slirp4netns DNS gets broken when running a rootful container after running a rootless container`
When /etc/resolv.conf on the host is a symlink to /run/systemd/resolve/stub-resolv.conf,
we have to mount an empty filesystem on /run/systemd/resolve in the child namespace,
so as to isolate the directory from the host mount namespace.
Otherwise our bind-mount for /run/systemd/resolve/stub-resolv.conf is unmounted
when systemd-resolved unlinks and recreates /run/systemd/resolve/stub-resolv.conf on the host.
[NO TESTS NEEDED]
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
$ mkdir zzz;cd zzz
$ printf "FROM quay.io/libpod/testimage:20210610\nCOPY ./ ./\nCOPY subdir ./\n" >Dockerfile
$ printf "*\nsubdir\n\!*/sub1*\n" >.dockerignore
$ mkdir subdir; touch subdir/sub1.txt
$ ../bin/podman-remote build .
Should fail, but succeeds because we are not sending over the
.dockerignore file to the server side. This PR will send the
.dockerignore so the server side and use it.
Fixes: #10907
Also if both .containerignore and .dockerignore in the context
directory, podman-remote should prefer .containerignore and not use
.dockerignore.
Fixes: #10908
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
There are a handful of tests that aren't actually being run because
there are missing \ which is prevented the tests from being executed.
Additionally some of the test syntax was incorrect but not showing up
because these tests didn't run.
Signed-off-by: Alex Schultz <aschultz@redhat.com>
The rather raw and scarce output of `podman auto-update` has been a
thorn in my eyes for a longer while. So far, Podman would only print
updated systemd units, one per line, without further formatting.
Motivated by issue #9949 which is asking for some more useful
information in combination with a dry-run feature, I sat down and
reflected which information may come in handy.
Running `podman auto-update` will now look as follows:
```
$ podman auto-update
Trying to pull [...]
UNIT CONTAINER IMAGE POLICY UPDATED
container-test.service 08fd34e533fd (test) localhost:5000/busybox registry false
```
Also refactor the spaghetti code in the backend a bit to make it easier
to digest and maintain.
For easier testing and for the sake of consistency with other commands
listing output, add a `--format` flag.
The man page will get an overhaul in a follow up commit.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
On EOF of STDIN, we need to perform a one-sided close of the
attach connection on the client side, to ensure that STDIN
finishing will also cause the exec session to terminate, instead
of hang.
Fixes#7360
Signed-off-by: Matthew Heon <mheon@redhat.com>
