* src-release.sh: Add "-r <date>" option to create reproducible
tarballs based upon a fixed timestamp of <date>.
* binutils/README-how-to-make-a-release: Add a line showing how to
use -r <date> when creating a binutils release.
Currently, despite having a smart pointer for frame_infos, GDB may
attempt to use an invalidated frame_info_ptr, which would cause internal
errors to happen. One such example has been documented as PR
python/28856, that happened when printing frame arguments calls an
inferior function.
To avoid failures, the smart wrapper was changed to also cache the frame
id, so the pointer can be reinflated later. For this to work, the
frame-id stuff had to be moved to their own .h file, which is included
by frame-info.h.
Frame_id caching is done explicitly using the prepare_reinflate method.
Caching is done manually so that only the pointers that need to be saved
will be, and reinflating has to be done manually using the reinflate
method because the get method and the -> operator must not change
the internals of the class. Finally, attempting to reinflate when the
pointer is being invalidated causes the following assertion errors:
check_ptrace_stopped_lwp_gone: assertion `lp->stopped` failed.
get_frame_pc: Assertion `frame->next != NULL` failed.
As for performance concerns, my personal testing with `time make
chec-perf GDB_PERFTEST_MODE=run` showed an actual reduction of around
10% of time running.
This commit also adds a testcase that exercises the python/28856 bug with
7 different triggers, run, continue, step, backtrace, finish, up and down.
Some of them can seem to be testing the same thing twice, but since this
test relies on stale pointers, there is always a chance that GDB got lucky
when testing, so better to test extra.
Regression tested on x86_64, using both gcc and clang.
Approved-by: Tom Tomey <tom@tromey.com>
This changes GDB to use frame_info_ptr instead of frame_info *
The substitution was done with multiple sequential `sed` commands:
sed 's/^struct frame_info;/class frame_info_ptr;/'
sed 's/struct frame_info \*/frame_info_ptr /g' - which left some
issues in a few files, that were manually fixed.
sed 's/\<frame_info \*/frame_info_ptr /g'
sed 's/frame_info_ptr $/frame_info_ptr/g' - used to remove whitespace
problems.
The changed files were then manually checked and some 'sed' changes
undone, some constructors and some gets were added, according to what
made sense, and what Tromey originally did
Co-Authored-By: Bruno Larsen <blarsen@redhat.com>
Approved-by: Tom Tomey <tom@tromey.com>
This adds frame_info_ptr, a smart pointer class. Every instance of
the class is kept on an intrusive list. When reinit_frame_cache is
called, the list is traversed and all the pointers are invalidated.
This should help catch the typical GDB bug of keeping a frame_info
pointer alive where a frame ID was needed instead.
Co-Authored-By: Bruno Larsen <blarsen@redhat.com>
Approved-by: Tom Tomey <tom@tromey.com>
This replaces frame_id_eq with operator== and operator!=. I wrote
this for a version of this series that I later abandoned; but since it
simplifies the code, I left this patch in.
Approved-by: Tom Tomey <tom@tromey.com>
Within the testsuite, use the keyword 'end' to terminate blocks of
Python code being sent to GDB, rather than sending \004. I could only
find three instances of this, all in tests that I originally wrote. I
have no memory of there being any special reason why I used \004
instead of 'end' - I assume I copied this from somewhere else that has
since changed.
Non of the tests being changed here are specifically about whether
\004 can be used to terminate a Python block, so I think switching to
the more standard 'end' keyword is the right choice.
I get this diff when re-generating configure, probably leftover from
67d1991b785 ("egrep in binutils").
Change-Id: I759c88c2bad648736d33ff98089db45c9b686356
To merge with gcc's copy of configure.ac we need to revert changes to
configure.ac in the following gcc commits:
dc832fb39fc0 2022-08-25
fc259b522c0f 2022-06-25
Then reapply configure.ac changes in binutils from these binutils
commits:
50ad1254d503 2021-01-09
bb368aad297f 2022-03-11
e5f2f7d901ee 2022-07-26
2cac01e3ffff 2022-09-26
Plus copy over gcc's config/ax_cxx_compile_stdcxx.m4, then regenerate
configure.
The class debug_names has two 'insert' overloads, but only one of them
is ever called externally, and it simply forwards to the other
implementation. It seems cleaner to me to have a single method, so
this patch merges the two.
With native and target boards native-gdbserver, remote-gdbserver-on-localhost and
remote-stdio-gdbserver I have for gdb.server/connect-with-no-symbol-file.exp:
...
# of expected passes 8
...
but with native-extended-gdbserver I have instead:
...
# of expected passes 8
# of unexpected failures 4
...
The extra FAILs are of the form:
...
(gdb) detach^M
Detaching from pid process 28985^M
[Inferior 1 (process 28985) detached]^M
(gdb) FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=: \
action=permission: connection to GDBserver succeeded
...
and are due to the fact that the actual gdb output doesn't match the regexp:
...
gdb_test "detach" \
".*Detaching from program: , process.*Ending remote debugging.*" \
"connection to GDBserver succeeded"
...
With native, the actual gdb output is:
...
(gdb) detach^M
Detaching from pid process 29657^M
Ending remote debugging.^M
[Inferior 1 (process 29657) detached]^M
(gdb) Remote debugging from host ::1, port 51028^M
...
and because the regexp doesn't match, it triggers an implicit clause for
"Ending remote debugging" in gdb_test_multiple, which has the consequence
that the FAIL is silent.
Fix:
- the regexp by making it less strict
- the silent fail by rewriting into a gdb_test_multiple, and adding an
explicit fail clause.
Tested on x86_64-linux, using native and aforementioned target boards.
On ubuntu 22.04 with the libc6-dbg package installed, I have the
following failure:
where
#0 print_philosopher (n=3, left=33 '!', right=33 '!') at .../gdb/testsuite/gdb.threads/linux-dp.c:105
#1 0x000055555555576a in philosopher (data=0x55555555937c) at .../gdb/testsuite/gdb.threads/linux-dp.c:148
#2 0x00007ffff7e11b43 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442
#3 0x00007ffff7ea3a00 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
(gdb) FAIL: gdb.threads/linux-dp.exp: first thread-specific breakpoint hit
The regex for this test accounts for different situations (with /
without debug symbol) but assumes that if debug info is present the
backtrace shows execution under pthread_create. However, for the
implementation under test, we are under start_thread.
Update the regex to accept start_thread.
Tested on Ubuntu-22.04 x86_64 with and without libc6-dbg debug symbols
available.
Change-Id: I1e1536279890bca2cd07f038e026b41e46af44e0
When running test-case gdb.server/abspath.exp with host board
local-remote-host-notty, I get:
...
$ git sti
...
deleted: gdb/testsuite/gdb.xml/trivial.xml
...
This happens as follows. The test-case calls skip_gdbserver_test, which calls
gdb_skip_xml_test, which does:
...
set xml_file [gdb_remote_download host "${srcdir}/gdb.xml/trivial.xml"]
...
Then proc gdb_remote_download appends $xml_file (which for this particular
host board happens to be ${srcdir}/gdb.xml/trivial.xml) to cleanfiles, which
ends up being handled in gdb_finish by:
...
eval remote_file target delete $cleanfiles
...
The problem is that a host file is deleted using target delete.
Fix this by splitting cleanfiles up in cleanfiles_target and cleanfiles_host.
Tested on x86_64-linux.
When running test-case gdb.base/default.exp with target board
native-gdbserver, we get:
...
WARNING: Skipping backtrace and break tests because of GDB stub.
...
There's no need for such a warning, so remove it.
Tested on x86_64-linux with native and target board native-gdbserver.
With target board remote-gdbserver-on-localhost and gdb.arch/i386-mpx-call.exp
I run into:
...
FAIL: gdb.arch/i386-mpx-call.exp: upper_bnd0: continue to a bnd violation
...
This is due to the have_mpx test which should return 0, but instead returns 1
because the captured output:
...
No MPX support
No MPX support
...
does not match the used regexp:
...
set status [expr ($status == 0) \
&& ![regexp "^No MPX support\r\n" $output]]
...
which does match the captured output with native:
...
No MPX support^M
No MPX support^M
...
Fix this by making the \r in the regexp optional.
Tested on x86_64-linux, with native and target board
remote-gdbserver-on-localhost.
Fix some DUPLICATEs that we run into with target board
remote-gdbserver-on-localhost, by using test_with_prefix.
Tested on x86_64-linux, with native and target board
remote-gdbserver-on-localhost.
When running test-case gdb.server/solib-list.exp with target board
remote-gdbserver-on-localhost, I run into:
...
(gdb) set solib-search-path $outputs/gdb.server/solib-list^M
(gdb) PASS: gdb.server/solib-list.exp: non-stop 0: \
set solib-search-path $outputs/gdb.server/solib-list
PATH: gdb.server/solib-list.exp: non-stop 0: \
set solib-search-path $outputs/gdb.server/solib-list
...
This is due to this code in gdb_load_shlib:
...
gdb_test "set solib-search-path [file dirname $file]" "" ""
...
Fix this by setting an explicit test name.
Tested on x86_64-linux, with native and target boards
remote-gdbserver-on-localhost, native-gdbserver and native-extended-gdbserver.
_bfd_check_format functions should not print errors or warnings if
they return NULL. A NULL return means the particular target under
test does not match, so there isn't any reason to make a complaint
about the target. In fact there isn't a good reason to warn even if
the target matches, except via the _bfd_per_xvec_warn mechanism; Some
other target might be a better match.
This patch tidies pe_bfd_object_p with the above in mind, and
restricts the PE optional header SectionAlignment and FileAlignment
fields somewhat. I chose to warn on nonsense values rather than
refusing to match. Refusing to match would be OK too.
PR 29653
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Don't emit error about
invalid NumberOfRvaAndSizes here. Limit loop copying data
directory to IMAGE_NUMBEROF_DIRECTORY_ENTRIES.
* peicode.h (pe_bfd_object_p): Don't clear and test bfd_error
around bfd_coff_swap_aouthdr_in. Warn on invalid SectionAlignment,
FileAlignment and NumberOfRvaAndSizes. Don't return NULL on
invalid NumberOfRvaAndSizes.
Read LSPEN, ASPEN and LSPACT bits from FPCCR and use them together
with FPCAR to identify if lazy FPU state preservation is active for
the current frame. See "Lazy context save of FP state", in B1.5.7,
also ARM AN298, supported by Cortex-M4F architecture for details on
lazy FPU register stacking. The same conditions are valid for other
Cortex-M cores with FPU.
This patch has been verified on a STM32F4-Discovery board by:
a) writing a non-zero value (lets use 0x1122334455667788 as an
example) to all the D-registers in the main function
b) configured the SysTick to fire
c) in the SysTick_Handler, write some other value (lets use
0x0022446688aaccee as an example) to one of the D-registers (D0 as
an example) and then do "SVC #0"
d) in the SVC_Handler, write some other value (lets use
0x0099aabbccddeeff) to one of the D-registers (D0 as an example)
In GDB, suspend the execution in the SVC_Handler function and compare
the value of the D-registers for the SVC_handler frame and the
SysTick_Handler frame. With the patch, the value of the modified
D-register (D0) should be the new value (0x009..eff) on the
SVC_Handler frame, and the intermediate value (0x002..cee) for the
SysTick_Handler frame. Now compare the D-register value for the
SysTick_Handler frame and the main frame. The main frame should
have the initial value (0x112..788).
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
Signed-off-by: Yvan ROUX <yvan.roux@foss.st.com>
After committing 8ba677d3560 ("[gdb/symtab] Don't complain about function
decls") I noticed that quite a bit of code in read_func_scope is used to decide
whether to issue the "cannot get low and high bounds for subprogram DIE at
$hex" complaint, which executes unnecessarily if we have the default
"set complaints 0".
Fix this by (NFC):
- factoring out new static function have_complaint from macro complaint, and
- using it to wrap the relevant code in read_func_scope.
Tested on x86_64-linux.
This commit adds additional infrun debug from the breakpoint.c file.
The new debug output all relates to breakpoint condition evaluation.
There is already some infrun debug emitted from the breakpoint.c file,
so hopefully, adding more will not be contentious. I think the
functions being instrumented make sense as part of the infrun process,
the inferior stops, evaluates the condition, and then either stops or
continues. This new debug gives more insight into that process.
I had to make the bp_location* argument to find_loc_num_by_location
const, and add a declaration for find_loc_num_by_location.
There should be no user visible changes unless they turn on debug
output.
The operand type "Xl(...)" denotes that (...) is a literal. Specifically,
they are intended to be a constant immediate value.
This commit prints "Xl(...)" operand with dis_style_immediate style,
not dis_style_text.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Use dis_style_immediate on
the constant literal of the "Xl..." operand.
This commit fixes two minor typing-related issues for
T-Head immediate operands.
1. A signed type must be specified when printing with %i.
2. unsigned/signed int is not portable enough for max 32-bit immediates.
Instead, we should use unsigned/signed long.
The format string is changed accordingly.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Fix T-Head immediate types on
printing.
On the RISC-V disassembler, some separators have non-text style when
printed with another word with another style.
This commit splits those, making sure that those comma and tabs are printed
with the "text" style.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Split and print the comma as
text. (riscv_disassemble_insn): Split and print tabs as text.
(riscv_disassemble_data): Likewise.
This commit makes types of printf arguments on riscv_disassemble_data
as small as possible (as long as we can preserve the portability) to reduce
the cost of printf (especially on 32-bit host).
opcodes/ChangeLog:
* riscv-dis.c (riscv_disassemble_data): Use smallest possible type
to printing data.
"%x" format specifier requires unsigned type, not int. This commit
fixes this issue on the RISC-V disassembler.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Fix printf argument types where
the format specifier is "%x".
This commit fixes certain print calls on immediate operands to have
dis_style_immediate.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Fix immediates to have
"immediate" style. (riscv_disassemble_data): Likewise.
Removing $BLD_POTFILES from BFD-POTFILES.in was correct, but left a
hole in dependencies.
make[4]: Entering directory '/home/alan/build/gas/all/bfd/po'
make[4]: *** No rule to make target '../elf32-aarch64.c', needed by '/home/alan/src/binutils-gdb/bfd/po/bfd.pot'. Stop.
* Makefile.am (BUILT_SOURCES): Add BUILD_CFILES.
* Makefile.in: Regenerate.
An earlier attempt (e68c3d59acd0 ["x86: better respect quotes in
parse_operands()"]) needed undoing (cc0f96357e0b ["x86: permit
parenthesized expressions again as addressing scale factor"]) as far its
effect here went. As indicated back then, the issue is the backwards
scanning of the operand string to find the matching opening parenthesis.
Switch to forward scanning, finding the last outermost unquoted opening
parenthesis (which is the one matching the trailing closing one).
Fuzzed input with this in .debug_line
[0x0000003b] Special opcode 115: advance Address by 8 to 0x401180 and Line by -2 to -1
PR 29647
* objdump.c (print_line): Don't decrement line number here..
(dump_lines): ..do so here instead, ensuring loop terminates.
It didn't take long for the fuzzers to avoid size checks in
bfd_malloc_and_get_section. Plug this hole.
* syms.c (_bfd_stab_section_find_nearest_line): Ignore fuzzed
sections with no contents.
[ Requires "[gdb/symtab] Don't complain about inlined functions" as
submitted here (
https://sourceware.org/pipermail/gdb-patches/2022-September/191762.html ). ]
With the test-case included in this patch, we get:
...
(gdb) ptype main^M
During symbol reading: cannot get low and high bounds for subprogram DIE \
at 0xc1^M
type = int (void)^M
(gdb) FAIL: gdb.dwarf2/anon-ns-fn.exp: ptype main without complaints
...
The DIE causing the complaint is a function declaration:
...
<2><c1>: Abbrev Number: 3 (DW_TAG_subprogram)
<c2> DW_AT_name : foo
<c8> DW_AT_declaration : 1
...
which is referred to from the DIE representing the function definition:
...
<1><f4>: Abbrev Number: 7 (DW_TAG_subprogram)
<f5> DW_AT_specification: <0xc1>
<f9> DW_AT_low_pc : 0x4004c7
<101> DW_AT_high_pc : 0x7
...
which does contain the low and high bounds.
Fix this by not complaining about function declarations.
Tested on x86_64-linux.
With the test-case included in this patch, we get:
...
(gdb) ptype main^M
During symbol reading: cannot get low and high bounds for subprogram DIE \
at 0x113^M
During symbol reading: cannot get low and high bounds for subprogram DIE \
at 0x11f^M
type = int (void)^M
(gdb) FAIL: gdb.dwarf2/inline.exp: ptype main
...
The complaints are about foo, with DW_AT_inline == DW_INL_inlined:
...
<1><11f>: Abbrev Number: 6 (DW_TAG_subprogram)
<120> DW_AT_name : foo
<126> DW_AT_prototyped : 1
<126> DW_AT_type : <0x10c>
<12a> DW_AT_inline : 1 (inlined)
...
and foo2, with DW_AT_inline == DW_INL_declared_inlined:
...
<1><113>: Abbrev Number: 5 (DW_TAG_subprogram)
<114> DW_AT_name : foo2
<11a> DW_AT_prototyped : 1
<11a> DW_AT_type : <0x10c>
<11e> DW_AT_inline : 3 (declared as inline and inlined)
...
Fix this by not complaining about inlined functions.
Tested on x86_64-linux.
Because riscv_insn_length started to support instructions up to 176-bit,
we need to increase buf size to 176-bit in size.
Also, that would break an assumption in riscv_insn::decode so this commit
fixes it, noting that instructions longer than 64-bit are not fully
supported yet.
Because riscv_insn_length started to support instructions up to 176-bit,
we need to increase packet buffer size to 176-bit in size.
include/ChangeLog:
* opcode/riscv.h (RISCV_MAX_INSN_LEN): Max instruction length for
use in buffer size.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_riscv): Increase buffer size for max
176-bit length instructions.
