* configure.in (mips-sgi-irix5*): New host and target. Use irix5
for both.
* config/mips/irix5.mh, config/mips/irix5.mt,
config/mips/xm-irix5.h, config/mips/nm-irix5.h,
config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support.
* mdebugread.c: New file, split out of mipsread.c. Added
elfmdebug_build_psymtabs routine. Added some checks on external
symbols. Changed code to keep ecoff_debug_info and
ecoff_debug_swap structs in the psymtab and in global pointers
rather than retrieving them from the bfd. Also changed to keep
the pending list with the psymtab rather than the objfile (each
psymtab for a single objfile points to the same pending list).
* mipsread.c: Bulk of file moved into mdebugread.c, leaving just
the sym_fns.
* Makefile.in (SFILES): Added mdebugread.c.
(OBS): Added mdebugread.o.
(mdebugread.o): New target.
* symfile.h: Declare mdebug_build_psymtabs and
elfmdebug_build_psymtabs.
* elfread.c (struct elfinfo): Added mdebugsect field.
(elf_locate_sections): Remember location of .mdebug section.
(elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug
section.
* infrun.c (AT_FUNCTION_START): Set to 0 if not already defined.
(wait_for_inferior): Use AT_FUNCTION_START if it is defined to see
if PC is at the start of a function.
* mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and
give it a default definition.
(mips_skip_prologue): Skip instructions which initialize $gp
register.
(in_sigtramp): New procedure, moved in from mipsread.c.
* config/mips/tm-mips.h: Declare in_sigtramp.
SOM BFD backend.
(obj_som_copyright): New function. Much like obj_som_version.
* config/tc-hppa.c (obj_copyright): Define as appropriate for
SOM and ELF.
(pa_copyright): Just a stub now.
auxiliary headers.
(bfd_som_attach_aux_hdr): New function.
* som.h (struct somdata): Add fields for attaching version and
copyright headers. Add accessor macros.
definitions for old versions of HPUX which fail to define them.
(som_hppa_howto_talbe): Add R_DLT_REL, R_AUX_UNWIND, and R_SEC_STMT
now that they're safe. Delete bogus R_STATEMENT relocations.
extra R_DATA_OVERRIDE.
(hppa_som_gen_reloc_type): Generate a relocation for the rounding
mode selector if needed.
(som_write_fixups): Handle requests for a change in the default
rounding mode. Rounding modes do not consume input bytes, but
are just markers much like R_ENTRY and R_EXIT.
* tc-hppa.c: (tc_gen_reloc): Addend for a plabel relocation should
be either 0 or 2 (no static link or static link required). Always
assume no static link.
(md_apply_fix_1): Rename to md_apply_fix. Fix argument decls.
Fix comments in various places. Always return a value.
Avoid dereferencing a NULL fx_addsy.
(hppa_force_relocation): Avoid dereferencing a NULL fx_addsy.
- sparc[lite]-coff as well as sparc-lynx
- producing coff (including debug info) under BFD_ASSEMBLER option
- cleanup of cpu-specific code in non-cpu-specific files
(especially write.c)
- providing common code to avoid duplication in cpu-specific files
(specifically, md_number_to_chars)
- stylistic changes & misc cleanup
================
* config/tc-sparc.c (tc_gen_reloc): Make adjustment to addend be dependent on
howto fields, not on format flavour.
* struc-symbol.h (struct symbol): New fields sy_obj and sy_tc, defined as types
OBJ_SYMFIELD_TYPE and TC_SYMFIELD_TYPE, if those macros are defined.
* config/obj-coff.h (TC_SYMFIELD_TYPE, OBJ_SYMFIELD_TYPE): Define.
(TARGET_SYMBOL_FIELDS, I960_SYM_FIELDS): Don't define.
(sy_tc, sy_obj): Define so that the fields look like they used to, until all
references get changed.
* write.c (fixup_segment): Lots of variables no longer register. Reordered
some code for easier reading.
* config/obj-coff.c (obj_coff_dim): dim_index no longer register. Deleted
superfluous return statement.
(obj_coff_line, obj_coff_size, obj_coff_scl, obj_coff_type, obj_coff_val,
tag_init, tag_insert): Deleted superfluous return statement.
(align, obj_coff_section): Deleted debugging printfs.
* config/tc-i386.c (md_assemble): Discard some register decls. Use assignment
rather than memcpy to copy template.
(op_hash, reg_hash, prefix_hash): Default C initialization of statics is
sufficient.
* config/tc-sparc.c (print_insn): Array Reloc is now const, and points to
const.
* config/obj-coff.h (TARGET_FORMAT): Only use coff-sparc-lynx if TE_LYNX; use
coff-sparc otherwise.
[USE_NATIVE_HEADERS]: Delete this code; it isn't used.
* write.c (fixup_segment): Call TC_VALIDATE_FIX, if defined, before processing
a fixup. Call TC_ADJUST_RELOC_COUNT just before returning. Remove some
i960-coff-specific code.
(TC_ADJUST_RELOC_COUNT): Default to doing nothing.
* config/tc-i960.h (TC_ADJUST_RELOC_COUNT) [OBJ_COFF]: Define.
(i960_validate_fix): Declare.
(TC_VALIDATE_FIX): Define.
* config/tc-i960.c (i960_validate_fix): New function.
* write.c (number_to_chars_littleendian): New function. Write out bytes in
little endian order, doing size and range checking.
(number_to_chars_bigendian): New function, similar.
* write.h: Declare them.
* config/tc-*.c (md_number_to_chars): Use them.
* config/tc-vax.c (md_apply_fix): Ditto.
* config/tc-i386.c (md_apply_fix): Ditto.
* config/obj-coff.c: Rearranged code for handling line number data.
(line_fsym): Renamed from function_lineoff in BFD_ASSEMBLER case, since the
usage is different from non-BFD_ASSEMBLER case.
(in_function, clear_function, set_function): New macros, to combine some of the
functionality implemented in differnet ways in BFD_ASSEMBLER and non-... code.
Used in other functions that used to check function_lineoff &c.
(obj_emit_lineno): Split into two copies, one for BFD_ASSEMBLER, one for not.
Non-BFD_ASSEMBLER version now has temporary variable to contain char* pointer
pointed to by char** argument. Always follow CROSS_COMPILE code; easier to
read that way.
(obj_coff_ln): Don't call add_lineno or c_line_new if appline is set.
(obj_coff_endef) [BFD_ASSEMBLER]: Don't do anything special for ".bf", it's
been done elsewhere.
(coff_frob_symbol): If ilne number data is pending, call add_linesym to flush it.
(coff_frob_file): Don't do that here.
* config/obj-coff.h (coff_frob_file): Declare.
(obj_frob_file): Define, to call it.
* config/tc-sparc.h (md_create_short_jump, md_create_long_jump,
md_estimate_size_before_relax: Define them as macros calling as_fatal.
* config/tc-sparc.c: Don't define them as functions.
(ecoff_mkobject_hook): Set SEC_SHARED_LIBRARY for the .reginfo
section so that the linker ignores it.
* ecofflink.c: Added various casts for 32/64 bit cross targeting.
(ecoff_add_bytes): Changed need argument to size_t.
(bfd_ecoff_debug_link_other): Check return value of
ecoff_add_string.
(nlm_backend_data, nlm_alpha_backend_data): New accessor macros.
(struct nlm_backend_data): New field no_uninitialized_data.
(nlm_no_uninitialized_data): New accessor macro.
* nlmcode.h (nlm_compute_section_file_positions): Handle
no_uninitialized_data.
(nlm_external_reloc_compare): Sort relocs by address for a
particular symbol, to make the sort more stable.
(nlm_write_object_contents): Cast the arguments to qsort. Get the
value of a debugging symbol the same way we get the value of a
normal symbol.
* nlm32-alpha.c: Various changes. Write out GP and .lita relocs.
Set no_uninitialized_data to true.
* nlm32-i386.c (nlm32_i386_backend), nlm32-sparc.c
(nlm32_sparc_backend): Set no_uninitialized_data field false.
* nlmswap.h (nlm_swap_fixed_header_out): Zero out destination
before filling it in.
optional_prefix_size, nlm_backend_object_p, nlm_write_prefix,
nlm_set_public_section, nlm_get_public_offset. Removed unused
nlm_write_reloc field. Changed nlm_write_import to remove
unnecessary symbol argument. Renamed nlm_write_externals to
nlm_write_external, and changed cound argument from bfd_vma to
bfd_size_type.
(nlm_optional_prefix_size, nlm_backend_object_p_func,
nlm_write_prefix_func, nlm_set_public_section_func,
nlm_get_public_offset_func): New accessor macros.
(nlm_write_reloc_func): Removed.
(nlm_write_external_func): Adjusted for field renaming.
* nlm32-i386.c (nlm_i386_write_import): Renamed from
nlm_i386_write_reloc. Removed old nlm_i386_write_import which
just called old nlm_i386_write_reloc.
(nlm_i386_write_external): Renamed from nlm_i386_write_externals.
Declared. Changed second argument from bfd_vma to bfd_size_type.
(nlm32_i386_backend): Adjusted for changes to fields and names.
* nlm32-sparc.c (nlm_sparc_mangle_relocs): Removed unused,
ifdeffed out code.
(nlm_sparc_write_import): Removed second argument.
(nlm_sparc_write_external): Renamed from
nlm_sparc_write_externals. Changed second argument from bfd_vma
to bfd_size_type.
(nlm32_sparc_backend): Adjusted for changes to fields and names.
* nlmcode.h: Removed some unused code.
(nlm_object_p): Don't destroy tdata pointer. Call
backend_object_p function if it exists.
(nlm_slurp_symbol_table): Removed unused variable rcount. Call
set_public_section_func if it exists instead of checking
NLM_HIBIT.
(nlm_compute_section_file_positions): Account for
optional_prefix_size.
(nlm_write_object_contents): Account for optional_prefix_size.
Removed useless variable write_reloc_func. Changed declaration
and call of write_import_func. Call write_prefix_func if it
exists. Removed unused variables len and temp. Call
get_public_offset_func if it exists rather than setting NLM_HIBIT.
