gdb_byte should be used for bytes from the program being debugged. We
have many places using char or unsigned char instead all over the
existing ports, and more ends up added over time due to copy/paste as
new code is based on old code.
I've greped the tree for "char buf[", and fixed all I found.
Tested by building with --enable-targets=all.
2013-03-01 Pedro Alves <palves@redhat.com>
Use gdb_byte for bytes from the program being debugged.
* arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
Change type of local 'buf' to gdb_byte.
* avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* cris-tdep.c (cris_sigcontext_addr)
(cris_sigtramp_frame_unwind_cache): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
(frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Likewise.
* frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
* hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
(hppa32_hpux_search_dummy_call_sequence)
(hppa_hpux_supply_save_state): Likewise.
* hppa-linux-tdep.c (insns_match_pattern)
(hppa_linux_find_global_pointer): Likewise.
* hppa-tdep.c (hppa_in_function_epilogue_p)
(skip_prologue_hard_way, hppa_frame_cache): Likewise.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
* i386fbsd-tdep.c (i386fbsd_supply_uthread)
(i386fbsd_collect_uthread): Likewise.
* ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
* ia64-tdep.c (examine_prologue, ia64_frame_cache)
(ia64_frame_prev_register, ia64_sigtramp_frame_cache)
(ia64_sigtramp_frame_prev_register, ia64_access_reg)
(ia64_access_rse_reg, ia64_libunwind_frame_this_id)
(ia64_libunwind_frame_prev_register)
(ia64_libunwind_sigtramp_frame_this_id)
(ia64_find_global_pointer_from_dynamic_section)
(find_extant_func_descr, find_func_descr, ia64_dummy_id)
(ia64_unwind_pc): Likewise.
* iq2000-tdep.c (iq2000_store_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call)
(m68hc11_extract_return_value): Likewise.
* m68klinux-nat.c (fetch_register, store_register): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
(mep_get_insn, mep_push_dummy_call): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips_linux_in_dynsym_stub): Likewise.
* mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
* ppc-linux-nat.c (fetch_register, store_register): Likewise.
* regcache.c (dump_endian_bytes): Change type of parameter 'buf'
to gdb_byte.
* remote-mips.c (mips_set_register): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
* score-tdep.c (score7_fetch_inst): Change type of parameter
'memblock' and local 'buf' to gdb_byte.
(score7_malloc_and_get_memblock): Change return type to gdb_byte.
Change type of local 'buf' to gdb_byte. Adjust.
(score7_adjust_memblock_ptr): Change type of parameter 'memblock'
to gdb_byte**.
(score7_analyze_prologue): Change type of 'memblock' and
'memblock_ptr' locals to gdb_byte*.
* sh64-tdep.c (sh64_extract_return_value)
(sh64_store_return_value): Change type of local 'buf' to gdb_byte.
* solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
* solib-pa64.c (pa64_solib_create_inferior_hook)
(pa64_open_symbol_file_object): Remove local 'buf'.
* solib-som.c (som_solib_create_inferior_hook, link_map_start)
(som_open_symbol_file_object): Likewise.
* solib-spu.c (spu_current_sos): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
(spu_store_registers): Likewise.
* target.c (debug_print_register): Likewise.
* tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
* xstormy16-tdep.c (xstormy16_store_return_value)
(xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
(xstormy16_find_jmp_table_entry): Likewise.
* config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
for system registers.
gas/testsuite/
* gas/aarch64/illegal.l: Delete the error message for
msr S3_1_C13_C15_1,x7.
* gas/aarch64/sysreg.s: Add new tests.
* gas/aarch64/sysreg.d: Update.
printf-like functions to avoid type related warnings on all
platforms.
(get_child_debug_event): Print dwDebugEventCode as hex since
that's how it's usually documented.
* gdb.trace/report.exp: Move some code to ...
(use_collected_data): New.
(top level): Call use_collected_data once on the live target.
Save at file of the current trace session, load it with target
tfile, and call use_collected_data again.
* target.cc (Target::do_plt_fde_location): New function.
* ehframe.h (class FDE): Add post_map field to u_.from_linker,
accessor function, and constructor param.
(struct Post_fde, Post_fdes): Declare.
(Cie::write): Add post_fdes param.
* ehframe.cc (Fde::write): Use plt_fde_location.
(struct Post_fde): Define.
(Cie::write): Stash FDEs added post merge mapping.
(Eh_frame::add_ehframe_for_plt): Assert no new CIEs after mapping.
Adjust Fde constructor call. Bump final_data_size_ for post map FDEs.
(Eh_frame::do_sized_write): Arrange to write post map FDES after
other FDEs.
* powerpc.cc (Target_powerpc::do_plt_fde_location): New function.
(Target_powerpc::has_glink): New function.
(Target_powerpc::do_relax): Add eh_frame info for stubs.
(struct Eh_cie, eh_frame_cie, glink_eh_frame_fde_64,
glink_eh_frame_fde_32, default_fde): New data.
(Stub_table::eh_frame_added_): New var.
(Stub_table::find_long_branch_entry, stub_address, stub_offset):
Make const.
(Stub_table::add_eh_frame): New function.
(Output_data_glink::add_eh_frame): New function.
(Target_powerpc::make_glink_section): Call add_eh_frame.
printf-like functions to avoid type related warnings on all
platforms.
(handle_output_debug_string): Fetch context information address
from debug string using string_to_core_addr.
* regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
* regformats/reg-tilegx32.dat: New.
gdbserver/
* Makefile.in (clean): Remove reg-tilegx.c, reg-tilegx32.c.
(reg-tilegx32.c): New rule.
* configure.srv (tilegx-*-linux*): Add reg-tilegx32.o to srv_regobj.
* linux-tile-low.c (tile_arch_setup): New function. Invoke
different register info initializer according to elf class.
(init_registers_tilgx32): New function. The tilegx32 register info
initializer.
(tile_fill_gregset): Use "uint_reg_t" to represent register size.
(tile_store_gregset): Likewise.
2013-02-27 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* tracepoint.c (tfile_trace_find): For tfind
pc/tp/range/outside, look for the next trace frame instead of
always starting from frame 0.
* binutils-all/readelf.n: Updare expected output from readelf.
* readelf.c (process_corefile_note_segment): Prevent attempts to
read beyond the end of the note buffer.
The "you have broken" bit of this text reads to me as if I had broken
it myself somehow. This patch eliminates that ambiguity.
2013-02-25 Pedro Alves <palves@redhat.com>
* common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
warning text.
