Fix step_resume_breakpoint unsaved during an infcall.
* gdbthread.h (struct thread_control_state): Move here field
step_resume_breakpoint ...
(struct thread_info): ... from here.
* infrun.c (save_infcall_control_state): Reset
control.step_resume_breakpoint to NULL.
(restore_infcall_control_state, discard_infcall_control_state): Delete
control.step_resume_breakpoint.
* arm-linux-tdep.c, infrun.c, thread.c: Update all the references to
the moved field.
gdb/testsuite/
Fix step_resume_breakpoint unsaved during an infcall.
* gdb.base/step-resume-infcall.exp: New file.
* gdb.base/step-resume-infcall.c: New file.
Rename and move inferior_thread_state and inferior_status.
* gdbthread.h (struct thread_control_state): New struct, move fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step and stop_bpstat here from struct thread_info.
(struct thread_suspend_state): New struct, move field stop_signal here
from struct thread_info.
(struct thread_info): Move the fields above from this struct.
* inferior.h: Move the inferior_thread_state and inferior_status
declarations comment to their definitions at infrun.c.
(struct inferior_control_state): New struct, move field stop_soon from
struct inferior here.
(struct inferior_suspend_state): New empty struct.
(struct inferior): New fields control and suspend. Move out field
stop_soon.
* infrun.c (struct inferior_thread_state): Rename to ...
(infcall_suspend_state): ... here. Replace field stop_signal by
fields thread_suspend and inferior_suspend.
(save_inferior_thread_state): Rename to ...
(save_infcall_suspend_state): ... here. New variable inf. Update the
code for new fields.
(restore_inferior_thread_state): Rename to ...
(restore_infcall_suspend_state): ... here. New variable inf. Update
the code for new fields.
(do_restore_inferior_thread_state_cleanup): Rename to ...
(do_restore_infcall_suspend_state_cleanup): ... here.
(make_cleanup_restore_inferior_thread_state): Rename to ...
(make_cleanup_restore_infcall_suspend_state): ... here.
(discard_inferior_thread_state): Rename to ...
(discard_infcall_suspend_state): ... here.
(get_inferior_thread_state_regcache): Rename to ...
(get_infcall_suspend_state_regcache): ... here.
(struct inferior_status): Rename to ...
(struct infcall_control_state): ... here. Replace fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step, stop_bpstat and stop_soon by fields thread_control and
inferior_control.
(save_inferior_status): Rename to ...
(save_infcall_control_state): ... here. Update the code for new
fields.
(restore_inferior_status): Rename to ...
(restore_infcall_control_state): ... here. Update the code for new
fields.
(do_restore_inferior_status_cleanup): Rename to ...
(do_restore_infcall_control_state_cleanup): ... here.
(make_cleanup_restore_inferior_status): Rename to ...
(make_cleanup_restore_infcall_control_state): ... here.
(discard_inferior_status): Rename to ...
(discard_infcall_control_state): ... here.
* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
references to the moved fields and renamed functions.
* config/tc-s390.c (current_cpu): Initialize with latest CPU.
(init_default_arch): Default to z/Architecture mode if CPU provides it.
Remove the check setting the CPU default.
2010-11-25 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add S390_OPCODE_MAXCPU.
This makes sure that rs6000-core.c gets recompiled whenever any of its
dependencies get changed.
bfd/ChangeLog:
* Makefile.am (OPTIONAL_BACKENDS): Add rs6000-core.lo.
(OPTIONAL_BACKENDS_CFILES): Add rs6000-core.c.
* Makefile.in: Regenerate.
bfd_uses_spe_extensions should only be used when BFD has been built
with ELF support. The typical way of checking that in GDB is to use
the HAVE_ELF macro.
gdb/ChangeLog:
* rs6000-tdep.c (bfd_uses_spe_extensions): Use bfd_elf_get_obj_attr_int
only if HAVE_ELF is defined.
* gdb.asm/asm-source.exp: Add new target "powerpc64"; expect leading `.'
on ppc64's symbols; "finish" and "return" commands must accept to
show the caller line again as well as the line after.
* gdb.asm/powerpc64.inc: New file.
(gdb_expect_list): Add verbose -log call for each pattern.
* gdb.base/signals.exp (test_handle_all_print): Call it.
Reduce timeout increment from 6 minutes to 1 minute.
* gdb.server/ext-run.exp: Call it.
* doc/as.texinfo: Refer to and include c-xtensa.texi for Xtensa
options. Move Xtensa options to proper alphabetical location.
* doc/c-xtensa.texi: Add markup for use in manpage generation.
2010-11-23 H.J. Lu <hongjiu.lu@intel.com>
* doc/as.texinfo: Refer to and include c-i386.texi for i386
options.
* doc/c-i386.texi: Add markup for use in manpage generation.
`both*'. New configure option --{en,dis}able-ld.
ld, gold/
* configure.ac: For --enable-gold, handle value `default' instead of
`both*'. Always install ld as ld.gold, install as ld if gold is
the default.
PR python/12212
* python/py-inferior.c (find_thread_object): Check if PIDGET
returns 0.
2010-11-23 Phil Muldoon <pmuldoon@redhat.com>
PR python/12212
* gdb.python/python.exp: Check that selected_thread raises an
error when no inferior is loaded.
When the sim is configured with profile support disabled, the build fails:
./../common/sim-profile.c: In function 'profile_option_handler':
./../common/sim-profile.c:337:6: warning: implicit declaration of function 'PROFILE_PC_FREQ'
./../common/sim-profile.c:337:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:351:6: warning: implicit declaration of function 'PROFILE_PC_NR_BUCKETS'
./../common/sim-profile.c:351:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:381:6: warning: implicit declaration of function 'PROFILE_PC_SHIFT'
./../common/sim-profile.c:381:6: error: lvalue required as left operand of assignment
./../common/sim-profile.c:405:8: warning: implicit declaration of function 'PROFILE_PC_START'
./../common/sim-profile.c:405:8: error: lvalue required as left operand of assignment
./../common/sim-profile.c:406:8: warning: implicit declaration of function 'PROFILE_PC_END'
./../common/sim-profile.c:406:8: error: lvalue required as left operand of assignment
./../common/sim-profile.c: In function 'profile_uninstall':
./../common/sim-profile.c:1299:7: warning: implicit declaration of function 'PROFILE_INSN_COUNT'
./../common/sim-profile.c:1299:37: warning: comparison between pointer and integer
./../common/sim-profile.c:1300:2: warning: passing argument 1 of 'zfree' makes pointer from integer without a cast
../common/sim-utils.h:30:6: note: expected 'void *' but argument is of type 'int'
make[2]: *** [sim-profile.o] Error 1
So add some stubs similar to how some of the other subsystems are
stubbed out so things build correctly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When building with device and hw support, the sim-core code generates a
lot of build time warnings such as:
./../common/sim-core.c: In function 'sim_core_map_attach':
./../common/sim-core.c:198:7: warning: passing argument 1 of 'device_error' from incompatible pointer type
../common/sim-core.h:347:6: note: expected 'struct device *' but argument is of type 'struct hw *'
./../common/sim-core.c:235:7: warning: passing argument 1 of 'device_error' from incompatible pointer type
../common/sim-core.h:347:6: note: expected 'struct device *' but argument is of type 'struct hw *'
In reality, these two structures get cast back and forth in the core
code already and so are "compatible". So tweak the three functions
that generate all of these warnings to include the casts automatically.
I know this isn't exactly clean, but the current device/hw ifdef
approach is full of landmines itself and I'm not entirely sure how
to unscrew it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
