Add a new stamp helper for quiet builds, and don't dump the command
line options when it runs. That isn't standard tool behavior, and
doesn't really seem necessary in any way.
...by reordering includes.
1. sim-utils.c
sim/mips/sim-main.h defines UserMode, while there is a struct in winnt.h
which has UserMode as a member. So if sim-main.h is included before winnt.h,
compilation fails.
2. ppc
registers.h defines CR, which is used as a member in winnt.h.
winsock2.h is included by sys/time.h, so sys/time.h has to be included
before registers.h.
Bug: https://sourceware.org/PR28476
This (and other) code from coffcode.h is broken for x86_64_coff_vec,
and has been ever since support was added in 2006 commit 99ad839030c1
Here, bfd_coff_aoutsz must match coff_swap_aouthdr_out otherwise we
end up writing garbage.
/* Note that peicode.h fills in a PEAOUTHDR, not an AOUTHDR.
include/coff/pe.h sets AOUTSZ == sizeof (PEAOUTHDR)). */
char * buff;
bfd_size_type amount = bfd_coff_aoutsz (abfd);
buff = (char *) bfd_malloc (amount);
if (buff == NULL)
return false;
coff_swap_aouthdr_out (abfd, & internal_a, buff);
amount = bfd_bwrite (buff, amount, abfd);
We have removed support for --target=x86_64-coff, likely because it
never worked properly, but still produce coff-x86_64.o with
--enable-targets=all. This means objcopy can recognize x86_64 COFF
files but will write garbage to the output file, a fact found by
fuzzers. I suspect x86_64 COFF is still broken after this fix, and
mention of coff-x86_64.* should be removed from bfd/Makefile.am.
* coff-x86_64.c: Don't include coff/pe.h.
(COFF_WITH_pex64): Don't define here.
* pe-x86_64.c: Include coff/pe.h and other headers.
(PEI_HEADERS): Define.
On a machine with gcc 11, I get:
FAIL: gdb.gdb/unittest.exp: test_completion: tab complete "maintenance selftest string_v" (second tab) (timeout)
FAIL: gdb.gdb/unittest.exp: test_completion: tab complete "maintenance selftest string_vie" (timeout)
That's because when compiling with C++ >= 17, we use the standard
version of string_view, and don't have a selftest for it. So the list
of selftests shown by the tab completion when completing "string_v"
differs.
Change the test to use the copy_* tests instead.
Change-Id: I85f6aa44ee5fc9652b9bd4451e0506b89773526b
Add section describing GDB's usage of debuginfod.
Refer to this new section in the description of the '--with-debuginfod'
configure option.
Mention debuginfod in the 'Separate Debug Files' section.
Add 'set debuginfod' command. Accepts 'on', 'off' or 'ask' as an
argument. 'on' enables debuginfod for the current session. 'off'
disables debuginfod for the current session. 'ask' will prompt
the user to either enable or disable debuginfod when the next query
is about to be performed:
This GDB supports auto-downloading debuginfo from the following URLs:
<URL1> <URL2> ...
Enable debuginfod for this session? (y or [n]) y
Debuginfod has been enabled.
To make this setting permanent, add 'set debuginfod on' to .gdbinit.
For interactive sessions, 'ask' is the default. For non-interactive
sessions, 'off' is the default.
Add 'show debuginfod status' command. Displays whether debuginfod
is set to 'on', 'off' or 'ask'.
Add 'set/show debuginfod urls' commands. Accepts a string of
space-separated debuginfod server URLs to be queried. The default
value is copied from the DEBUGINFOD_URLS environment variable.
Finally add 'set/show debuginfod verbose' commands to control whether
debuginfod-related output is displayed. Verbose output is enabled
by default.
(gdb) run
Starting program: /bin/sleep 5
Download failed: No route to host. Continuing without debug info for /lib64/libc.so.6.
If GDB is not built with debuginfod then these commands will just display
Support for debuginfod is not compiled into GDB.
This adds a new Python function, gdb.Architecture.integer_type, which
can be used to look up an integer type of a given size and
signed-ness. This is useful to avoid dependency on debuginfo when a
particular integer type would be useful.
v2 moves this to be a method on gdb.Architecture and addresses other
review comments.
I noticed that the only caller of ada_value_print_inner is
valprint.c:do_val_print (via ada_language::value_print_inner), meaning
that the try/catch logic in this function is redundant. This patch
removes the wrapper function.
Regression tested on x86-64 Fedora 34.
Today I re-learned that resolve_dynamic_type can return a type for
which is_dynamic_type returns true. This can happen for an array
whose elements have dynamic type -- the array is reported as dynamic,
but resolving the elements would be incorrect, because each element
might have a different type after resolution.
You can see the special case in resolve_dynamic_array_or_string:
if (ary_dim != NULL && ary_dim->code () == TYPE_CODE_ARRAY)
...
else
...
I looked into having the TYPE_CODE_ARRAY case in
is_dynamic_type_internal follow this same logic, but that breaks down
on the gdb.fortran/dynamic-ptype-whatis.exp test case. In particular
this code in fortran_undetermined::evaluate:
value *callee = std::get<0> (m_storage)->evaluate (nullptr, exp, noside);
if (noside == EVAL_AVOID_SIDE_EFFECTS
&& is_dynamic_type (value_type (callee)))
callee = std::get<0> (m_storage)->evaluate (nullptr, exp, EVAL_NORMAL);
... relies on is_dynamic_type returning true for such an array.
I wasn't really sure of the best way to fix this, so in the meantime I
wrote this patch, which documents the oddity so that I might have a
chance of remembering this in the future.
The disassembly tests in "maint selftest" will fail on x86-linux.
This happens because opcodes rejects an attempt to disassemble for an
arch with a 64-bit address size when bfd_vma is 32-bit.
This patch avoids this problem by avoiding the test in this case. I
chose to do it this way because this seems to be the only situation
where opcodes checks the size of bfd_vma.
For v2 of this patch, I've also updated memory_error_test to do the
same thing. This is needed due to the "improve error reporting from
the disassembler" patch.
A build with --disable-unit-tests currently run into:
...
ld: maint.o: in function \
`maintenance_selftest_completer(cmd_list_element*, completion_tracker&,
char const*, char const*)':
src/gdb/maint.c:1183: undefined reference to \
`selftests::for_each_selftest(
gdb::function_view<
void (std::__cxx11::basic_string<char,std::char_traits<char>,
std::allocator<char> > const&)>)'
...
Fix this by guarding the call to selftests::for_each_selftest in
maintenance_selftest_completer with GDB_SELF_TEST, such that the "-verbose"
completion still works.
Rebuild on x86_64-linux and ran gdb.gdb/unittest.exp.
This patch adds readelf support for decoding the exception table
opcode for restoring the RA_AUTH_CODE pseudo register defined by the
EHABI
(https://github.com/ARM-software/abi-aa/releases/download/2021Q1/ehabi32.pdf
Section 10.3).
* readelf.c (decode_arm_unwind_bytecode): Add support to decode
restoring RA_AUTH_CODE pseudo register.
Needed for single stepping in Linux, this adds the or1k implementation
of or1k_software_single_step. Most of the implementation is borrowed
from the bare metal single step code from or1k_single_step_through_delay
which has been extracted and shared in helper function
or1k_delay_slot_p.
This patch adds support for running gdb natively on OpenRISC linux.
Debugging support is provided via the linux PTRACE interface which is
mostly handled by GDB genric code. This patch provides the logic of how
to read and write the ptrace registers between linux and GDB.
Single stepping is privided in a separate patch.
This patch adds gdbserver support for OpenRISC. This has been used for
debugging the glibc port that in being worked on here:
https://github.com/openrisc/or1k-glibc/tree/or1k-port-2
Hence the comment about registers definitions being inline with glibc.
PR 28436
* config/tc-arm.c (do_vfp_nsyn_push_pop_check): New function.
(do_vfp_nsyn_pop): Use the new function.
(do_vfp_nsyn_push): Use the new function.
* testsuite/gas/arm/v8_1m-mve.s: Add new instructions.
* testsuite/gas/arm/v8_1m-mve.d: Updated expected disassembly.
In debug messages, I think it would be more helpful to print ptid using
the simple "pid.lwp.tid" notation in infrun debug messages. I am
currently debugging some fork issues, and find the pid_to_str output not
so useful, as it doesn't tell which process a thread belongs to.
It currently shows up like this:
[infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=0, current thread [Thread 0x7ffff7d95740 (LWP 892942)] at 0x55555555521f
With the patch, it shows up like this:
[infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=1, current thread [894072.894077.0] at 0x5555555551d9
Change-Id: I130796d7dfb0d8e763b8358d8a6002701d80c4ea
After the previous commit, it is easy to add completion for selftest
names. Again, this is not particularly high value, but I rarely touched
completion, so it served as a simple example to get some practice.
Change the for_each_selftest_ftype parameter to gdb::function_view, so
that we can pass a lambda that captures things.
Change-Id: I87cac299ddca9ca7eb0ffab78342e850a98d954c
This patch adds support for encoding the Return Address Authentication pseudo
register - '.save {ra_auth_code}' as defined by the DWARF ABI - in the
exception tables where the opcode is defined by the EHABI
gas/Changelog:
* config/tc-arm.c (arm_reg_type): Add new type REG_TYPE_PSEUDO.
(reg_expected_msgs): Add message for pseudo reg type.
(reg_list_els): Add new reg list type REGLIST_PSEUDO.
(parse_reg_list): Handle new REGLIST_PSEUDO type.
(s_arm_unwind_save_pseudo): Encode pseudo reg list save in exception
tables.
(s_arm_unwind_save): Handle new REG_TYPE_PSEUDO.
(reg_names): Add ra_auth_code pseudo register.
* testsuite/gas/arm/unwind-pacbti-m.s: New test.
* testsuite/gas/arm/unwind-pacbti-m.d: New test.
* testsuite/gas/arm/unwind-pacbti-m-readelf.d: New test.
