* config/tc-z80.c (emit_data_val): Warn on constant overflow.
(signed_overflow): New function.
(unsigned_overflow): New function.
(is_overflow): Use new functions.
(md_apply_fix): Use signed_overflow.
* testsuite/gas/z80/ez80_adl_suf.d: Fix test.
* testsuite/gas/z80/ez80_isuf.s: Likewise.
* testsuite/gas/z80/ez80_z80_suf.d: Likewise.
I built GDB with `--enable-targets=all`, then started GDB passing it
an x86-64 executable, finally I ran 'maint selftest', and observed GDB
crash like this:
BFD: BFD (GNU Binutils) 2.36.50.20210519 assertion fail ../../src/bfd/hash.c:438
Aborted (core dumped)
The problem originates from two locations, for example in csky-dis.c
(csky_get_disassembler) where we do this:
const char *sec_name = NULL;
...
sec_name = get_elf_backend_data (abfd)->obj_attrs_section;
if (bfd_get_section_by_name (abfd, sec_name) != NULL)
...
We end up in here because during the selftests GDB forces the
architecture to be csky, but the BFD being accessed is still of type
x86-64. As a result obj_attrs_section returns NULL, which means we
end up passing NULL to bfd_get_section_by_name. If we follow the
function calls from bfd_get_section_by_name we eventually end up in
bfd_hash_hash, which asserts that the string (i.e. the name) is not
NULL.
The same crash can be reproduced in GDB without using the selftests,
for example:
(gdb) file x86_64.elf
(gdb) start
(gdb) set architecture csky
(gdb) disassemble main
Dump of assembler code for function main:
BFD: BFD (GNU Binutils) 2.36.50.20210519 assertion fail ../../src/bfd/hash.c:438
Aborted (core dumped)
The fix I propose here is to have bfd_get_section_by_name return NULL
if name is ever NULL. For consistency I updated
bfd_get_section_by_name_if in the same way, even though I'm not
hitting any problems along that code path right now.
I looked through the source tree and removed two NULL checks in
bfd/dwarf2.c which are no longer needed, its possible that there are
additional NULL checks that could be removed, I just didn't find them.
bfd/ChangeLog:
* section.c (bfd_get_section_by_name): Return NULL if name is
NULL.
(bfd_get_section_by_name_if): Likewise.
* dwarf2.c (read_section): Remove unneeded NULL check.
(find_debug_info): Likewise.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
src/sim/ppc/hw_memory.c: In function 'hw_memory_init_address':
src/sim/ppc/hw_memory.c:194:75: error: pointer targets in passing \
argument 4 of 'device_find_integer_array_property' differ in signedness \
[-Werror=pointer-sign]
int nr_cells
= device_find_integer_array_property(me, "available", 0, &dummy);
^
...
Fix this by changing the type of dummy.
Add a powerpc64-prologue testcase, this is based on the existing
powerpc-prologue test, but updated for the powerpc64 (le) target.
YYYY-MM-DD Will Schmidt <will_schmidt@vnet.ibm.com>
gcc/testsuite/ChangeLog
* gdb.arch/powerpc64-prologue.c: New test to exercise prologues
for the powerpc64 LE target.
* gdb.arch/powerpc-prologue.exp: Test Harness.
clang 11 with libc++'s <algorithm> fails to match the existing
operator<() for std::less<> since the method is not marked const.
gdb/ChangeLog:
* dwarf2/read.c (tu_abbrev_offset::operator<): Mark const.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
src/sim/ppc/hw_phb.c: In function 'hw_phb_attach_address':
src/sim/ppc/hw_phb.c:315:12: error: comparison between \
'attach_type {aka enum _attach_type}' and \
'enum <anonymous>' [-Werror=enum-compare]
if (type != hw_phb_normal_decode
^~
...
Fix this by casting type to hw_phb_decode.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
src/sim/ppc/emul_netbsd.c: In function 'do_gettimeofday':
src/sim/ppc/emul_netbsd.c:770:16: error: null argument where non-null \
required (argument 1) [-Werror=nonnull]
int status = gettimeofday((t_addr != 0 ? &t : NULL),
^~~~~~~~~~~~
...
Fix this by unconditionally passing &t as first argument.
These methods are just trivial wrappers around the versions accepting
a char pointer. By moving them to the header the compiler can inline
them.
gdb/ChangeLog:
* ui-out.c (ui_out::field_string): Move to ui-out.h.
(ui_out::text): Ditto.
* ui-out.h (class ui_out): Add definitions of
ui_out::field_string and ui_out::text which were previously
defined in ui-out.c.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
In file included from src/sim/ppc/cpu.h:26:0,
from src/sim/ppc/mon.c:25,
from src/sim/ppc/inline.c:64,
from idecode.c:26:
src/sim/ppc/device.h:788:8: error: 'device_event_queue_deschedule' \
declared 'static' but never defined [-Werror=unused-function]
(void) device_event_queue_deschedule
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
This seems to be caused by the fact that the function is declared using
INLINE_EVENT instead of INLINE_DEVICE.
Fix this and a similar error in the same file.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
In file included from src/sim/ppc/cpu.h:251:0,
from src/sim/ppc/emul_generic.h:24,
from src/sim/ppc/emul_generic.c:24:
src/sim/ppc/cpu.c:76:1: error: 'cpu_create' defined but not used \
[-Werror=unused-function]
cpu_create(psim *system,
^~~~~~~~~~
...
The function is defined as:
...
INLINE_CPU\
(cpu *)
cpu_create(psim *system,
...
which expands to:
...
static cpu * __attribute__((__unused__))
cpu_create(psim *system,
...
The problem is that gcc does not associate the attribute to the function.
I've filed a PR about this ( PR gcc/100670 ), which may or may not be valid.
Work around/fix this by modifying the INLINE_* definitions in inline.h to move
UNUSED to the start such that we have:
...
__attribute__((__unused__)) static cpu *
cpu_create(psim *system,
...
gas/ChangeLog:
2021-05-19 John Buddery <jvb@cyberscience.com>
PR 25599
* config/tc-ia64.c (emit_one_bundle): Increment fixup offset
by one for PCREL60B relocation on HP-UX.
gdb/ChangeLog:
* ui-out.h (class ui_out): Add ui_out::text accepting a constant
reference to a std::string. Fix all callers using
std::string::c_str.
* ui-out.c (ui_out::text): Ditto.
This commit:
commit ecf25064e87a3d2d59871b3ea7126fa0dee0001d
Date: Thu May 13 15:42:20 2021 +0100
gdb: fix pretty printing max depth behaviour
Introduced a couple of duplicate tests, this commit resolves them by
providing unique test names.
gdb/testsuite/ChangeLog:
* gdb.guile/scm-pretty-print.exp: Add test names to resolve
duplicate test names.
When running test-case gdb.base/info-types-c++.exp with check-read1 I run
into:
...
425: typedef const void * std::allocator_traits<std::allocator<std::\
_Sp_counted_ptr_inplace<std::filesystem::__cxx11::\
recursive_directory_iterator::_Dir_stack, std::allocator<std::filesystem::\
__cxx11::recursive_directory_iterator::_Dir_stack>, \
FAIL: gdb.base/info-types-c++.exp: info types (timeout)
...
The corresponding gdb_test_multiple does contain an exp_continue which
resets the timeout counter every time info for another file is printed, but
this doesn't help for this timeout because it times out during printing info
for a single file.
Fix this by processing line-by-line.
Tested on x86_64-linux, both with gcc-7.5.0 and gcc-4.8.5 (the latter is
different because the "unsigned int" type is missing).
gdb/testsuite/ChangeLog:
2021-05-19 Tom de Vries <tdevries@suse.de>
* gdb.base/info-types.exp.tcl: Scan info types output line-by-line.
* plugin.c (bfd_plugin_open_input): Inform the user if the limit
on the number of open files is reached. If possible, try to
increase this limit before failing.
In a case open() returns 0 tty might be leaked. While 0 should be
stdin (and therefore is an unlikely return value from open()), it's
still the case that the test should be for non-negative return values
from open().
gdb/ChangeLog:
2021-05-11 Alexandra Hájková <ahajkova@redhat.com>
* inflow.c (new_tty): Do not leak tty.
PR 27884
* dwarf.c (get_type_abbrev_from_form): Replace cu_offset_return
param with map_return, and return map for DW_FORM_ref_addr.
(get_type_signedness): Adjust calls to get_type_abbrev_from_form.
Pass returned cu map start and end to recursive call.
(read_and_display_attr_value): Similarly.
We're going to start using gnulib in the sim, so make sure it exists.
ChangeLog:
* Makefile.def: Add configure-sim dependency on all-gnulib.
* Makefile.in: Regenerated.
Simon pointed out that dwarf2/cu.h and dwarf2/comp-unit.h seemingly
mean the same thing. He suggested renaming the latter to
comp-unit-head.h, which is what this patch does.
gdb/ChangeLog
2021-05-17 Tom Tromey <tom@tromey.com>
* dwarf2/read.h: Update include.
* dwarf2/read.c: Update include.
* dwarf2/line-header.c: Update include.
* dwarf2/cu.h: Update include.
* dwarf2/comp-unit-head.h: Rename from comp-unit.h.
* dwarf2/comp-unit-head.c: Rename from comp-unit.c.
* Makefile.in (COMMON_SFILES): Update.
This moves some of the dwarf2_cu methods to a new file, dwarf2/cu.c.
gdb/ChangeLog
2021-05-17 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf2_cu::addr_sized_int_type)
(dwarf2_cu::start_symtab, dwarf2_cu::addr_type)
(dwarf2_cu::dwarf2_cu): Move to cu.c.
* dwarf2/cu.c: New file.
* Makefile.in (COMMON_SFILES): Add dwarf2/cu.c.
This moves dwarf2_cu and one supporting data structure to a new header
file. The main goal, as always with this kind of change, is to make
the DWARF reader a bit more understandable.
gdb/ChangeLog
2021-05-17 Tom Tromey <tom@tromey.com>
* Makefile.in (HFILES_NO_SRCDIR): Add dwarf2/cu.h.
* dwarf2/read.c (struct delayed_method_info, struct dwarf2_cu):
Move to cu.h.
* dwarf2/cu.h: New file.
Two additional settings for developers who use emacs:
1. Set brace-list-open to 0 for C and C++ modes, this ensures we
format things like:
enum blah
{
....
};
Instead of the default for the emacs GNU style:
enum blah
{
...
};
The former seems to be the GDB style.
2. Set sentence-end-double-space to t. This is actually the default
value for this setting, but if anyone has customised this to nil in
general, then forcing this back to t for GDB files will give a
better behaviour for the paragraph filling.
gdb/ChangeLog:
* .dir-locals.el: Set sentence-end-double-space for all modes, and
set brace-list-open to 0 for C and C++ modes.
gdbserver/ChangeLog:
* .dir-locals.el: Set sentence-end-double-space for all modes, and
set brace-list-open to 0 for C and C++ modes.
gdbsupport/ChangeLog:
* .dir-locals.el: Set sentence-end-double-space for all modes, and
set brace-list-open to 0 for C and C++ modes.
With GCC trunk, gdb.ada/access_to_packed_array.exp causes a GDB crash.
The problem is that ptype tries to resolve a dynamic type. However,
the inferior is not running, so there are no frames.
This patch updates dwarf2_evaluate_loc_desc::get_frame_base to handle
this situation.
gdb/ChangeLog
2021-05-17 Tom Tromey <tromey@adacore.com>
* dwarf2/loc.c (dwarf2_evaluate_loc_desc::get_frame_base): Throw
if frame is null.
I tried a build using the undefined behavior sanitizer, and gcc gave
this error:
In file included from /usr/include/string.h:495,
from ../gnulib/import/string.h:41,
from ../../binutils-gdb/gdb/../gdbsupport/common-defs.h:95,
from ../../binutils-gdb/gdb/nat/linux-osdata.c:20:
In function 'char* strncpy(char*, const char*, size_t)',
inlined from 'void time_from_time_t(char*, int, TIME_T)' at ../../binutils-gdb/gdb/nat/linux-osdata.c:923:15,
inlined from 'void time_from_time_t(char*, int, TIME_T)' at ../../binutils-gdb/gdb/nat/linux-osdata.c:911:1,
inlined from 'void linux_xfer_osdata_sem(buffer*)' at ../../binutils-gdb/gdb/nat/linux-osdata.c:1082:22:
/usr/include/bits/string_fortified.h:106:34: error: 'char* __builtin_strncpy(char*, const char*, long unsigned int)' specified bound 32 equals destination size [-Werror=stringop-truncation]
This patch fixes the problem by subtracting one from the length
parameter to strncpy.
I changed a couple of other similar functions -- gcc does not warn
about these, but I didn't see any substantial difference between the
different cases, and I think these are just latent warnings, to be
triggered in the future by a change to inlining heuristics.
gdb/ChangeLog
2021-05-17 Tom Tromey <tromey@adacore.com>
* nat/linux-osdata.c (user_from_uid, time_from_time_t)
(group_from_gid): Subtract one from strncpy length.
Address sanitizer pointed out a buglet in source.c:add_path.
In this test, from gdb.base/source-dir.exp:
(gdb) set directories :/foo:/bar
... 'p[-1]' will result in a buffer underflow.
This patch fixes the bug by introducing a new check.
2021-05-17 Tom Tromey <tromey@adacore.com>
* source.c (add_path): Check 'p' before using 'p[-1]'.
Address sanitizer pointed out that the patch to use 'delete' for
dwarf2_per_cu_data introduced a bug -- now it is possible to delete a
signatured_type using a pointer to its base class.
This patch fixes the problem by introducing a deleter and a unique_ptr
specialization. A virtual destructor would be more ordinary here, but
it seemed wasteful to add a vtable just for this purpose. If virtual
methods are ever needed here, we can revisit this.
2021-05-17 Tom Tromey <tromey@adacore.com>
* dwarf2/read.h (struct dwarf2_per_cu_data_deleter: New.
(dwarf2_per_cu_data_up): New typedef.
(struct dwarf2_per_bfd) <allocate_per_cu>: Change return type.
<all_comp_units>: Use dwarf2_per_cu_data_up.
* dwarf2/read.c (dwarf2_per_cu_data::operator()): New function.
(dwarf2_per_bfd::allocate_per_cu): Return dwarf2_per_cu_data_up.
(create_cu_from_index_list): Likewise.
(create_signatured_type_table_from_index)
(create_cus_from_debug_names_list, add_type_unit)
(read_comp_units_from_section): Update.
(dwarf2_find_containing_comp_unit): Change type of all_comp_units.
(run_test): Update.
I noticed that sort_tu_by_abbrev_offset only has a single caller. It
seemed simpler to replace it with an implementation of operator<
instead.
2021-05-17 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (tu_abbrev_offset::operator<): New method.
(sort_tu_by_abbrev_offset): Remove.
(build_type_psymtabs): Update.
I noticed these files because they weren't considered by black for
reformatting, prior to adding pyproject.toml, because their extension is
not .py. I don't think they specifically need to be named .py.in, so I
suggest renaming them to .py. This will make it nicer to edit them, as
editors will recognize them more easily as Python files.
Perhaps this was needed before, when the testsuite didn't always put
output files in the output directory. Then, a different name for the
source and destination file might have been desirable to avoid
overwriting a file with itself (perhaps that wasn't well handled). But
in any case, it doesn't see to cause any problem now.
gdb/testsuite/ChangeLog:
* gdb.python/py-framefilter-gdb.py.in: Rename to:
* gdb.python/py-framefilter-gdb.py: ... this.
* gdb.python/py-framefilter-invalidarg-gdb.py.in: Rename to:
* gdb.python/py-framefilter-invalidarg-gdb.py: ... this.
Change-Id: I63bb94010bbbc33434ee1c91a386c91fc1ff80bc
When running black to format Python files, files with extension .py.in
are ignored, because they don't end in .py. Add a pyproject.toml file
to instruct black to pick up these files too.
gdb/ChangeLog:
* py-project.toml: New.
* gdb-gdb.py.in: Re-format.
gdb/testsuite/ChangeLog:
* gdb.python/py-framefilter-gdb.py.in: Re-format.
* gdb.python/py-framefilter-invalidarg-gdb.py.in: Re-format.
Change-Id: I9b88faec3360ea24788f44c8b89fe0b2a5f4eb97
Same idea as the previous patches, but for whether a command is a
"command class help" command. I think this one is particularly useful,
because it's not obvious when reading code what "c->func == NULL" means.
Remove the cmd_func_p function, which does kind of the same thing as
cmd_list_element::is_command_class_help (except it doesn't give a clue
about the semantic of a NULL func value).
gdb/ChangeLog:
* cli/cli-decode.h (cmd_list_element) <is_command_class_help>:
New, use it.
* command.h (cmd_func_p): Remove.
* cli/cli-decode.c (cmd_func_p): Remove.
Change-Id: I521a3e1896dc93a5babe1493d18f5eb071e1b3b7
Same idea as the previous patch, but for prefix instead of alias.
gdb/ChangeLog:
* cli/cli-decode.h (cmd_list_element) <is_prefix>: New, use it.
Change-Id: I76a9d2e82fc8d7429904424674d99ce6f9880e2b
Add the cmd_list_element::is_alias helper to check whether a command is
an alias. I find it easier to understand the intention in:
if (c->is_alias ())
than
if (c->alias_target != nullptr)
Change all the spots that are reading alias_target just to compare it to
NULL/nullptr to use is_alias instead.
gdb/ChangeLog:
* cli/cli-decode.h (cmd_list_element) <is_alias>: New, use it.
Change-Id: I26ed56f99ee47fe884fdfedf87016501631693ce
cmd_pointer is another field whose name I found really not clear. Yes,
it's a pointer to a command, the type tells me that. But what's the
relationship of that command to the current command? This field
contains, for an alias, the command that it aliases. So I think that
the name "alias_target" would be more appropriate.
Also, rename "old" parameters to "target" in the functions that add
aliases.
gdb/ChangeLog:
* cli/cli-decode.h (cmd_list_element) <cmd_pointer>: Rename
to...
<alias_target>: ... this.
(add_alias_cmd): Rename old to target.
(add_info_alias): Rename old_name to target_name.
(add_com_alias): Likewise.
Change-Id: I8db36c6dd799fae155f7acd3805f6d62d98befa9
While browsing this code, I found the name "prefixlist" really
confusing. I kept reading it as "list of prefixes". Which it isn't:
it's a list of sub-commands, for a prefix command. I think that
renaming it to "subcommands" would make things clearer.
gdb/ChangeLog:
* Rename "prefixlist" parameters to "subcommands" throughout.
* cli/cli-decode.h (cmd_list_element) <prefixlist>: Rename to...
<subcommands>: ... this.
* cli/cli-decode.c (lookup_cmd_for_prefixlist): Rename to...
(lookup_cmd_with_subcommands): ... this.
Change-Id: I150da10d03052c2420aa5b0dee41f422e2a97928
I don't think this can ever happen, that we add an alias command and
pass a nullptr old (target) command. Remove the "if" handling this,
replace with an assert.
gdb/ChangeLog:
* cli/cli-decode.c (add_alias_cmd): Don't handle old == 0.
Change-Id: Ibb39e8dc4e0c465fa42e6826215f30a0a0aef932
I don't think this method really benefits from being implemented in the
header file, especially because it's recursive, it can't be inlined.
Move it to the source file, so it's no re-compiled by every CU
including cli/cli-decode.h.
I also noticed this method could be const, make it so.
gdb/ChangeLog:
* cli/cli-decode.h (prefixname): Make const, move implementation
to cli/cli-decode.c.
* cli/cli-decode.c (cmd_list_element::prefixname): New.
Change-Id: I1597cace98d9a4ba71f51f1f495e73cc07b5dcf3
The initial problem I wanted to fix here is that GAS was rejecting MVE
instructions such as:
vmov q3[2], q3[0], r2, r2
with:
Error: General purpose registers may not be the same -- `vmov q3[2],q3[0],r2,r2'
which is incorrect; such instructions are valid. Note that for moves in
the other direction, e.g.:
vmov r2, r2, q3[2], q3[0]
GAS is correct in rejecting this as it does not make sense to move both
lanes into the same register (the Arm ARM says this is CONSTRAINED
UNPREDICTABLE).
After fixing this issue, I added assembly/disassembly tests for these
vmovs. This revealed several disassembly issues, including incorrectly
marking the moves into vector lanes as UNPREDICTABLE, and disassembling
many of the vmovs as vector loads. These are now fixed.
gas/ChangeLog:
* config/tc-arm.c (do_mve_mov): Only reject vmov if we're moving
into the same GPR twice.
* testsuite/gas/arm/mve-vmov-bad-2.l: Tweak error message.
* testsuite/gas/arm/mve-vmov-3.d: New test.
* testsuite/gas/arm/mve-vmov-3.s: New test.
opcodes/ChangeLog:
* arm-dis.c (mve_opcodes): Fix disassembly of
MVE_VMOV2_GP_TO_VEC_LANE when idx == 1.
(is_mve_encoding_conflict): MVE vector loads should not match
when P = W = 0.
(is_mve_unpredictable): It's not unpredictable to use the same
source register twice (for MVE_VMOV2_GP_TO_VEC_LANE).
As mentioned in the test case itself, depending on the fortran compiler
used, class member names used in the print commands and also output of
these print commands varies. Existing print commands and its output are
suited for gfortran, hence they were failing with clang compiler and test
case was modified accordingly for clang compiler.
gdb/testsuite/ChangeLog:
* gdb.base/class-allocatable-array.exp: Modified test for clang.
