Complement commit 7ea814144a31 ("Fully disentangle gdb and gdbserver"),
<https://sourceware.org/ml/gdb-patches/2002-02/msg00692.html> (from
2002!), and remove a recipe to include config files in `make TAGS',
which are no longer used by `gdbserver' as from that commit.
gdb/gdbserver/
* Makefile.in (TAGS): Remove config files from the recipe.
regset_from_core_section doesn't exist anymore; it has been replaced
by the iterate_over_regset_sections gdbarch method. Update comments
accordingly to not confuse readers.
gdb/ChangeLog:
2020-01-24 Christian Biesinger <cbiesinger@google.com>
* aarch64-fbsd-tdep.c (aarch64_fbsd_iterate_over_regset_sections):
Update comment.
* aarch64-linux-tdep.c (aarch64_linux_iterate_over_regset_sections):
Likewise.
* arm-fbsd-tdep.c (arm_fbsd_iterate_over_regset_sections): Likewise.
* gdbcore.h (deprecated_add_core_fns): Update comment to point to
the correct replacement (iterate_over_regset_sections).
* riscv-fbsd-tdep.c (riscv_fbsd_iterate_over_regset_sections):
Update comment.
Change-Id: I5eea4d18e15edae5d6dfd5d0d6241e5b2ae40daa
This is an update of this patch:
https://sourceware.org/ml/gdb-patches/2018-09/msg00884.html
This patch attempts to address PR gdb/23718 by re-enabling stdin
whenever an exception is caught during gdb.execute().
When Python gdb.execute() is called, an exception could occur (e.g. the
target disappearing), which is then converted into a Python exception. If
stdin was disabled before the exception is caught, it is not re-enabled,
because the exception doesn't propagate to the top level of the event loop,
whose catch block would otherwise enable it.
The result is that when execution of a Python script completes, GDB does
not prompt or accept input, and is effectively hung.
This change rectifies the issue by re-enabling stdin in the catch block of
execute_gdb_command, prior to converting the exception to a Python
exception.
Since this patch was originally posted I've added a test, and also I
converted the code to re-enable stdin from this:
SWITCH_THRU_ALL_UIS ()
{
async_enable_stdin ();
}
to simply this:
async_enable_stdin ();
My reasoning is that we only need the SWITCH_THRU_ALL_UIS if, at the time
the exception is caught, the current_ui might be different than at the time
we called async_disable_stdin. Within python's execute_gdb_command I think
it should be impossible to switch current_ui, so the SWITCH_THRU_ALL_UIS
isn't needed.
gdb/ChangeLog:
PR gdb/23718
* gdb/python/python.c (execute_gdb_command): Call
async_enable_stdin in catch block.
gdb/testsuite/ChangeLog:
PR gdb/23718
* gdb.server/server-kill-python.exp: New file.
Change-Id: I1cfc36ee9f8484cc1ed82be9be338353db6bc080
If we catch an exception in start_event_loop's call to
gdb_do_one_event, then it is possible that the current_ui has changed
since we called async_disable_stdin. If that's the case then calling
async_enable_stdin will be called on the wrong UI.
To solve this problem we wrap the call to async_enable_stdin with
SWITCH_THRU_ALL_UIS, this causes us to try and re-enable stdin for all
UIs, which will catch any for which we called async_disable_stdin.
gdb/ChangeLog:
* event-loop.c (start_event_loop): Wrap async_enable_stdin with
SWITCH_THRU_ALL_UIS.
gdb/testsuite/ChangeLog:
* gdb.server/multi-ui-errors.c: New file.
* gdb.server/multi-ui-errors.exp: New file.
Change-Id: I1e18deff2e6f4e17f7a13adce3553eb001cad93b
This started as a patch to enable the asm window to handle attempts to
disassemble invalid memory, but it ended up expanding into a
significant rewrite of how the asm window handles scrolling. These
two things ended up being tied together as it was impossible to
correctly test scrolling into invalid memory when the asm window would
randomly behave weirdly while scrolling.
Things that should work nicely now; scrolling to the bottom or top of
the listing with PageUp, PageDown, Up Arrow, Down Arrow and we should
be able to scroll past small areas of memory that don't have symbols
associated with them. It should also be possible to scroll to the
start of a section even if there's no symbol at the start of the
section.
Adding tests for this scrolling was a little bit of a problem. First
I would have liked to add tests for PageUp / PageDown, but the tuiterm
library we use doesn't support these commands right now due to only
emulating a basic ascii terminal. Changing this to emulate a more
complex terminal would require adding support for more escape sequence
control codes, so I've not tried to tackle that in this patch.
Next, I would have liked to test scrolling to the start or end of the
assembler listing and then trying to scroll even more, however, this
is a problem because in a well behaving GDB a scroll at the start/end
has no effect. What we need to do is:
- Move to start of assembler listing,
- Send scroll up command,
- Wait for all curses output,
- Ensure the assembler listing is unchanged, we're still at the
start of the listing.
The problem is that there is no curses output, so how long do we wait
at step 3? The same problem exists for scrolling to the bottom of the
assembler listing. However, when scrolling down you can at least see
the end coming, so I added a test for this case, however, this feels
like an area of code that is massively under tested.
gdb/ChangeLog:
PR tui/9765
* minsyms.c (lookup_minimal_symbol_by_pc_section): Update header
comment, add extra parameter, and update to store previous symbol
when appropriate.
* minsyms.h (lookup_minimal_symbol_by_pc_section): Update comment,
add extra parameter.
* tui/tui-disasm.c (tui_disassemble): Update header comment,
remove unneeded parameter, add try/catch around gdb_print_insn,
rewrite to add items to asm_lines vector.
(tui_find_backward_disassembly_start_address): New function.
(tui_find_disassembly_address): Updated throughout.
(tui_disasm_window::set_contents): Update for changes to
tui_disassemble.
(tui_disasm_window::do_scroll_vertical): No need to adjust the
number of lines to scroll.
gdb/testsuite/ChangeLog:
PR tui/9765
* gdb.tui/tui-layout-asm.exp: Add scrolling test for asm window.
Change-Id: I323987c8fd316962c937e73c17d952ccd3cfa66c
This is triggered by simply scrolling off the end of the dissasembly
window. This commit doesn't fix the actual exception that is being
thrown, which will still need to be fixed, but makes sure that we
don't ever throw an exception out to readline.
gdb/ChangeLog:
yyyy-mm-dd Pedro Alves <palves@redhat.com>
PR tui/9765
* tui/tui-io.c (tui_getc): Rename to ...
(tui_getc_1): ... this.
(tui_get): New, reimplent as try/catch wrapper around tui_getc_1.
Change-Id: I2e32a401ab34404b2132ec82a3e1c17b9b723e41
The pattern
objfile->section_offsets[SECT_OFF_TEXT (objfile)]
... appears very often, to get the offset of the text section of an
objfile. I thought it would be more readable to write it as:
objfile->text_section_offset ()
... so I added this method and used it where possible. I also added
data_section_offset, although it is not used as much.
gdb/ChangeLog:
* objfiles.h (ALL_OBJFILE_OSECTIONS): Move up.
(SECT_OFF_DATA): Likewise.
(SECT_OFF_RODATA): Likewise.
(SECT_OFF_TEXT): Likewise.
(SECT_OFF_BSS): Likewise.
(struct objfile) <text_section_offset, data_section_offset>: New
methods.
* amd64-windows-tdep.c (amd64_windows_find_unwind_info): Use
objfile::text_section_offset.
* coff-pe-read.c (add_pe_forwarded_sym): Likewise.
* coffread.c (coff_symtab_read): Likewise.
(enter_linenos): Likewise.
(process_coff_symbol): Likewise.
* ctfread.c (get_objfile_text_range): Likewise.
* dtrace-probe.c (dtrace_probe::get_relocated_address):
Use objfile::data_section_offset.
* dwarf2-frame.c (execute_cfa_program): Use
objfile::text_section_offset.
(dwarf2_frame_find_fde): Likewise.
* dwarf2read.c (create_addrmap_from_index): Likewise.
(create_addrmap_from_aranges): Likewise.
(dw2_find_pc_sect_compunit_symtab): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(add_partial_symbol): Likewise.
(add_partial_subprogram): Likewise.
(process_full_comp_unit): Likewise.
(read_file_scope): Likewise.
(read_func_scope): Likewise.
(read_lexical_block_scope): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_rnglists_process): Likewise.
(dwarf2_ranges_process): Likewise.
(dwarf2_ranges_read): Likewise.
(dwarf_decode_lines_1): Likewise.
(new_symbol): Likewise.
(dwarf2_fetch_die_loc_sect_off): Likewise.
(dwarf2_per_cu_text_offset): Likewise.
* hppa-bsd-tdep.c (hppabsd_find_global_pointer): Likewise.
* hppa-tdep.c (read_unwind_info): Likewise.
* ia64-tdep.c (ia64_find_unwind_table): Likewise.
* psympriv.h (struct partial_symtab): Likewise.
* psymtab.c (find_pc_sect_psymtab): Likewise.
* solib-svr4.c (enable_break): Likewise.
* stap-probe.c (relocate_address): Use
objfile::data_section_offset.
* xcoffread.c (enter_line_range): Use
objfile::text_section_offset.
(read_xcoff_symtab): Likewise.
We encounter this error when building on macOS with GCC.
CXX darwin-nat.o
/src-local/binutils-gdb/gdb/darwin-nat.c: In member function 'ptid_t darwin_nat_target::wait_1(ptid_t, target_waitstatus*)':
/src-local/binutils-gdb/gdb/darwin-nat.c:1264:18: error: declaration of 'inf' shadows a previous local [-Werror=shadow=compatible-local]
for (inferior *inf : all_inferiors (this))
^~~
/src-local/binutils-gdb/gdb/darwin-nat.c:1205:20: note: shadowed declaration is here
struct inferior *inf;
^~~
Fix it by moving the declaration of `inf` in the specific scopes that
need it. I think it's clearer this way anyway, as it shows that it's
not the same `inf` that is used in these different scopes.
Thanks to Iain Sandoe for reporting this. I did not see this error at
first, because I compile with the default system compiler on macOS,
which is clang. The compiler flag we try to enable for this is
`-Wshadow=local`, which is not one recognized by clang. I checked to
see if there would a version of the -Wshadow* warnings [1] we could
enable for clang, that would catch this, but the only one that would is
`-Wshadow` itself, and this is too invasive for us (which is why we
enabled just -Wshadow=local in the first place).
[1] https://clang.llvm.org/docs/DiagnosticsReference.html#wshadow
gdb/ChangeLog:
* darwin-nat.c (darwin_nat_target::wait_1): Move `inf`
declaration to narrower scopes.
The darwin-nat.c file doesn't build since the multi-target changes
(5b6d1e4f, "Multi-target support"). This patch makes it build. I have
access to a macOS vm, so I am able to build it, but I wasn't able to
successfully codesign it and try to actually debug something, so I don't
know if it works. I don't have much more time to put on this to figure
it out, so I thought I'd sent the patch anyway, as it's at least a step
in the right direction.
The bulk of the patch is to change a bunch of functions to be methods of
the darwin_nat_target object, so that this can pass `this` to
find_inferior_ptid and other functions that now require a
process_stratum_target pointer.
The darwin_ptrace_him function (renamed to darwin_nat_target::ptrace_him
in this patch) is passed to fork_inferior as the `init_trace_fun`
parameter. Since the method can't be passed as a plain function pointer
(we need the `this` pointer), I changed the `init_trace_fun` parameter
of fork_inferior to be a gdb::function_view, so we can pass a lambda and
capture `this`.
The changes in darwin-nat.h are only to move definition higher in the
file, so that forward declarations are not needed.
gdb/ChangeLog:
* darwin-nat.h (struct darwin_exception_msg, enum
darwin_msg_state, struct darwin_thread_info, darwin_thread_t):
Move up.
(class darwin_nat_target) <wait_1, check_new_threads,
decode_exception_message, decode_message, stop_inferior,
init_thread_list, ptrace_him, cancel_breakpoint>: Declare.
* darwin-nat.c (darwin_check_new_threads): Rename to...
(darwin_nat_target::check_new_threads): ... this.
(darwin_suspend_inferior_it): Remove.
(darwin_decode_exception_message): Rename to...
(darwin_nat_target::decode_exception_message): ... this.
(darwin_nat_target::resume): Pass target to find_inferior_ptid.
(darwin_decode_message): Rename to...
(darwin_nat_target::decode_message): ... this.
(cancel_breakpoint): Rename to...
(darwin_nat_target::cancel_breakpoint): ... this.
(darwin_wait): Rename to...
(darwin_nat_target::wait_1): ... this. Use range-based for loop
instead of iterate_over_inferiors.
(darwin_nat_target::wait): Call wait_1 instead of darwin_wait.
(darwin_stop_inferior): Rename to...
(darwin_nat_target::stop_inferior): ... this.
(darwin_nat_target::kill): Call wait_1 instead of darwin_wait.
(darwin_init_thread_list): Rename to...
(darwin_nat_target::init_thread_list): ... this.
(darwin_ptrace_him): Rename to...
(darwin_nat_target::ptrace_him): ... this.
(darwin_nat_target::create_inferior): Pass lambda function to
fork_inferior.
(darwin_nat_target::detach): Call stop_inferior instead of
darwin_stop_inferior.
* fork-inferior.h (fork_inferior): Change init_trace_fun
parameter to gdb::function_view.
* fork-inferior.c (fork_inferior): Likewise.
Each time a dll is loaded, update_solib_list is called.
This in turn calls deep down xfer_partial -> windows_xfer_shared_libraries,
which calls windows_xfer_shared_library for each loaded dll,
and pe_text_section_offset reads the dll for the text section offset.
Also if the data provided by xfer_partial is bigger than 4K,
then all of this is done for each 4K chunk (see target_read_alloc_1).
Caching of the text section offset improves the startup time of
an application with >300 dynamically loaded plugins from 2m10s to 10s.
And the shutdown time improves from 2m to 2s.
gdb/ChangeLog:
2020-01-23 Hannes Domani <ssbssa@yahoo.de>
* i386-cygwin-tdep.c (core_process_module_section): Update.
* windows-nat.c (struct lm_info_windows): Add text_offset.
(windows_xfer_shared_libraries): Update.
* windows-tdep.c (windows_xfer_shared_library):
Add text_offset_cached argument.
* windows-tdep.h (windows_xfer_shared_library): Update.
bfd/
2020-01-22 Maxim Blinov <maxim.blinov@embecosm.com>
* bfd/elfnn-riscv.c (riscv_skip_prefix): New.
(riscv_prefix_cmp): Likewise.
(riscv_non_std_ext_p): Deleted.
(riscv_std_sv_ext_p): Likewise.
(riscv_non_std_sv_ext_p): Likewise.
(riscv_merge_non_std_and_sv_ext): Rename to...
(riscv_merge_multi_letter_ext): and modified to use riscv_prefix_cmp.
(riscv_merge_arch_attr_info): Replace 3 calls to
riscv_merge_non_std_and_sv_ext with single call to
riscv_merge_multi_letter_ext.
* bfd/elfxx-riscv.c (riscv_parse_std_ext): Break if we
encounter a 'z' prefix.
(riscv_get_prefix_class): New function, return prefix class based
on first few characters of input string.
(riscv_parse_config): New structure to factor out minor differences
in extension class parsing behaviour.
(riscv_parse_sv_or_non_std_ext): Rename to...
(riscv_parse_prefixed_ext): and parameterise with
riscv_parse_config.
(riscv_std_z_ext_strtab, riscv_std_s_ext_strtab): New.
(riscv_multi_letter_ext_valid_p): New.
(riscv_ext_x_valid_p, riscv_ext_z_valid_p, riscv_ext_s_valid_p): New.
(riscv_parse_subset): Delegate all non-single-letter parsing work
to riscv_parse_prefixed_ext.
* bfd/elfxx-riscv.h (riscv_isa_ext_class): New type.
(riscv_get_prefix_class): Declare.
gas/
2020-01-22 Maxim Blinov <maxim.blinov@embecosm.com>
* testsuite/gas/riscv/march-ok-s.d: sx is no longer valid and
s exts must be known, so rename *ok* to *fail*.
* testsuite/gas/riscv/march-ok-sx.d: Likewise.
* testsuite/gas/riscv/march-ok-s-with-version: Likewise.
* testsuite/gas/riscv/march-fail-s.l: Expected error messages for
above change.
* testsuite/gas/riscv/march-fail-sx.l: Likewise.
* testsuite/gas/riscv/march-fail-sx-with-version.l: Likewise.
Change-Id: Ic4d91a13d055a10d30ab28752a380a669b59f29c
The MSP430X RRUX instruction (unsigned right shift) is synthesized as
the RRC (rotate right through carry) instruction, but with the ZC
(zero carry) bit of the opcode extention word set.
Ensure the carry flag is ignored when the ZC bit is set.
sim/msp430/ChangeLog:
2020-01-22 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* msp430-sim.c (msp430_step_once): Ignore the carry flag when executing
an RRC instruction, if the ZC bit of the extension word is set.
sim/testsuite/sim/msp430/ChangeLog:
2020-01-22 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* rrux.s: New test.
In 64-bit mode, double word suffix in mnemonic with word general register
is disallowed. Otherwise, assembler gives a warning:
$ cat /tmp/x.s
movl %ax, %bx
movl %ds, %ax
movl %ax, %cs
$ gcc -c /tmp/x.s
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Error: incorrect register `%bx' used with `l' suffix
/tmp/x.s:2: Error: incorrect register `%ax' used with `l' suffix
/tmp/x.s:3: Error: incorrect register `%ax' used with `l' suffix
$ gcc -c /tmp/x.s -m32
/tmp/x.s: Assembler messages:
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Warning: using `%ebx' instead of `%bx' due to `l' suffix
/tmp/x.s:1: Warning: using `%eax' instead of `%ax' due to `l' suffix
/tmp/x.s:2: Warning: using `%eax' instead of `%ax' due to `l' suffix
/tmp/x.s:3: Warning: using `%eax' instead of `%ax' due to `l' suffix
This patch makes it a hard error in all modes. Now we get:
$ gcc -c /tmp/x.s -m32
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Error: incorrect register `%bx' used with `l' suffix
/tmp/x.s:2: Error: incorrect register `%ax' used with `l' suffix
/tmp/x.s:3: Error: incorrect register `%ax' used with `l' suffix
PR gas/25438
* config/tc-i386.c (check_long_reg): Always disallow double word
suffix in mnemonic with word general register.
* testsuite/gas/i386/general.s: Replace word general register
with double word general register for movl.
* testsuite/gas/i386/inval.s: Add tests for movl with word general
register.
* testsuite/gas/i386/general.l: Updated.
* testsuite/gas/i386/inval.l: Likewise.
This provides a linker generated __tls_get_addr_desc wrapper function
preserving registers around a __tls_get_addr call. The idea being to
support __tls_get_addr_desc without requiring a glibc update.
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add tga_group.
(ppc64_elf_archive_symbol_lookup): Extract __tls_get_addr_opt for
__tls_get_addr_desc.
(ppc64_elf_size_stubs): Add section for linker generated
__tls_get_addr_desc wrapper function. Loop at least once if
generating this function.
(emit_tga_desc, emit_tga_desc_eh_frame): New functions.
(ppc64_elf_build_stubs): Generate __tls_get_addr_desc.
ld/
* testsuite/ld-powerpc/tlsdesc3.d,
* testsuite/ld-powerpc/tlsdesc3.wf,
* testsuite/ld-powerpc/tlsdesc4.d,
* testsuite/ld-powerpc/tlsdesc4.s,
* testsuite/ld-powerpc/tlsdesc4.wf: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
This implements register saving and restoring in the __tls_get_addr
call stub, so that when glibc supports the optimized tls call stub gcc
can generate code that assumes only r0, r12 and of course r3 are
changed on a __tls_get_addr call. When gcc expects __tls_get_addr
calls to preserve registers the call will be to __tls_get_addr_desc,
which will be translated by the linker to a call to __tls_get_addr_opt.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add no_tls_get_addr_regsave.
* elf64-ppc.c (struct ppc_link_hash_table): Add tga_desc and
tga_desc_fd.
(is_tls_get_addr): Match tga_desc and tga_desc_df too.
(STDU_R1_0R1, ADDI_R1_R1): Define.
(tls_get_addr_prologue, tls_get_addr_epilogue): New functions.
(ppc64_elf_tls_setup): Set up tga_desc and tga_desc_fd. Indirect
tga_desc_fd to opt_fd, and tga_desc to opt. Set
no_tls_get_addr_regsave.
(branch_reloc_hash_match): Add hash3 and hash4.
(ppc64_elf_tls_optimize): Handle tga_desc_fd and tga_desc too.
(ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_relocate_section): Likewise.
(plt_stub_size, build_plt_stub): Likewise. Size regsave
__tls_get_addr stub.
(build_tls_get_addr_stub): Build regsave __tls_get_addr stub and
eh_frame.
(ppc_size_one_stub): Handle tga_desc_fd and tga_desc too. Size
eh_frame for regsave __tls_get_addr.
gas/
* config/tc-ppc.c (parse_tls_arg): Handle tls arg for
__tls_get_addr_desc and __tls_get_addr_opt.
ld/
* emultempl/ppc64elf.em (ppc64_opt, PARSE_AND_LIST_LONGOPTS),
(PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Support
--tls-get-addr-regsave and --no-tls-get-addr-regsave.
(params): Init new field.
* ld.texi (--tls-get-addr-regsave, --no-tls-get-addr-regsave):
Document.
* testsuite/ld-powerpc/tlsdesc.s,
* testsuite/ld-powerpc/tlsdesc.d,
* testsuite/ld-powerpc/tlsdesc.wf,
* testsuite/ld-powerpc/tlsdesc2.d,
* testsuite/ld-powerpc/tlsdesc2.wf,
* testsuite/ld-powerpc/tlsexenors.d,
* testsuite/ld-powerpc/tlsexenors.r,
* testsuite/ld-powerpc/tlsexers.d,
* testsuite/ld-powerpc/tlsexers.r,
* testsuite/ld-powerpc/tlsexetocnors.d,
* testsuite/ld-powerpc/tlsexetocrs.d,
* testsuite/ld-powerpc/tlsexetocrs.r,
* testsuite/ld-powerpc/tlsopt6.d,
* testsuite/ld-powerpc/tlsopt6.wf: New.
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
When linking with --no-tls-optimize the linker doesn't generate a call
or long branch stub to __tls_get_addr in some circumstances, giving:
relocation truncated to fit: R_PPC64_REL24 against symbol `__tls_get_addr'
* elf64-ppc.c (ppc64_elf_size_stubs): Correct condition under
which __tls_get_addr calls will be eliminated.
In commit
gdb: add back declarations for _initialize functions
6c2659886f7018fcca26ee0fc813bc9748fb8513
I wrongfully edited gdbarch.c, instead of editing gdbarch.sh and
re-generating gdbarch.c. This patch fixes gdbarch.sh to add a
declaration for _initialize_gdbarch. gdbarch.c is not changed, as the
output of gdbarch.sh now matches the current state of gdbarch.c.
gdb/ChangeLog:
* gdbarch.sh: Add declaration for _initialize_gdbarch.
This removes the two uses of iterate_over_inferiors, in favor of
range-based loops.
gdb/ChangeLog:
* remote-sim.c (check_for_duplicate_sim_descriptor): Remove.
(get_sim_inferior_data): Remove use of iterate_over_inferiors,
replace with range-based for.
(gdbsim_interrupt_inferior): Remove.
(gdbsim_target::interrupt): Replace iterate_over_inferiors use
with a range-based for. Inline code from
gdbsim_interrupt_inferior.
While GNU Source Highlight is good, it's also difficult to build and
distribute. For one thing, it needs Boost. For another, it has an
unusual configuration and installation setup.
Pygments, a Python library, doesn't suffer from these issues, and so I
thought it would be a reasonable fallback.
This patch implements this idea. GNU Source Highlight is preferred,
but if it is unavailable (or fails), the extension languages are
tried. This patch also implements support for Pygments.
Something similar could be done for Guile, using:
https://dthompson.us/projects/guile-syntax-highlight.html
However, I don't know enough about Guile internals to make this
happen, so I have not done it here.
gdb/ChangeLog
2020-01-21 Tom Tromey <tromey@adacore.com>
* source-cache.c (source_cache::ensure): Call ext_lang_colorize.
* python/python.c (python_extension_ops): Update.
(gdbpy_colorize): New function.
* python/lib/gdb/__init__.py (colorize): New function.
* extension.h (ext_lang_colorize): Declare.
* extension.c (ext_lang_colorize): New function.
* extension-priv.h (struct extension_language_ops) <colorize>: New
member.
* cli/cli-style.c (_initialize_cli_style): Update help text.
Change-Id: I5e21623ee05f1f66baaa6deaeca78b578c031bf4
As suggested, the cond variable is really supposed to be a bool. So,
make it so.
gdb/ChangeLog:
2020-01-21 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (struct aarch64_displaced_step_closure)
<cond>: Change type to bool.
(aarch64_displaced_step_b_cond): Update cond to use bool type.
(aarch64_displaced_step_cb): Likewise.
(aarch64_displaced_step_tb): Likewise.
While debugging the step-over-syscall problem, i wanted to see a bit more
debugging output to try to determine the root cause.
This patch does this.
gdb/ChangeLog:
2020-01-21 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (aarch64_displaced_step_fixup): Add more debugging
output.
In particular, this one:
FAIL: gdb.base/step-over-syscall.exp: fork: displaced=on: check_pc_after_cross_syscall: single step over fork final pc
When ptrace fork event reporting is enabled, GDB gets a PTRACE_EVENT_FORK
event whenever the inferior executes the fork syscall.
Then the logic is that GDB needs to step the inferior yet again in order to
receive a predetermined SIGTRAP, but no execution takes place because the
signal was already queued for delivery. That means the PC should stay the same.
I noticed the aarch64 code is currently adjusting the PC in this situation,
making the inferior skip an instruction without executing it.
The following change checks if we did not execute the instruction
(pc - to == 0), making proper adjustments for such case.
Regression tested on aarch64-linux-gnu on the tryserver.
gdb/ChangeLog:
2020-01-21 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (struct aarch64_displaced_step_closure )
<pc_adjust>: Adjust the documentation.
(aarch64_displaced_step_fixup): Check if PC really moved before
adjusting it.
There's no need (anymore?) to heavily special case this - just make
generic logic consider only its first operand, and deal with the case
of an 'l' suffix not being allowed in a pattern.
Commit b76bc5d54e ("x86: don't default variable shift count insns to
8-bit operand size") pointed out a very bad case, but the underlying
problem is, as mentioned on various occasions, much larger: Silently
selecting a (nowhere documented afaict) certain default operand size
when there's no "sizing" suffix and no suitable register operand(s) is
simply dangerous (for the programmer to make mistakes).
While in Intel syntax mode such mistakes already lead to an error (which
is going to remain that way), AT&T syntax mode now gains warnings in
such cases by default, which can be suppressed or promoted to an error
if so desired by the programmer. Furthermore at least general purpose
insns now consistently have a default applied (alongside the warning
emission), rather than accepting some and refusing others.
No warnings are (as before) to be generated for "DefaultSize" insns as
well as ones acting on selector and other fixed-width values. For
SYSRET, however, the DefaultSize needs to be dropped - it had been
wrongly put there in the first place, as it's unrelated to .code16gcc
(no stack accesses involved).
As set forth as a prereq when I first mentioned this intended change a
few years back, Linux as well as gcc have meanwhile been patched to
avoid (emission of) ambiguous operands (and hence triggering of the new
warning).
Note that I think that in 64-bit mode IRET and far RET would better get
a diagnostic too, as it's reasonably likely that a suffix-less instance
really is meant to be a 64-bit one. But I guess I better make this a
separate follow-on patch.
Note further that floating point operations with integer operands are an
exception for now: They continue to use short (16-bit) operands by
default even in 32- and 64-bit modes.
Finally note that while {,V}PCMPESTR{I,M} would, strictly speaking, also
need to be diagnosed, with their 64-bit forms not being very useful I
think it is better to continue to avoid warning about them (by way of
them carrying IgnoreSize attributes).
Just like other VCVT*{X,Y} templates do, and to allow the programmer
flexibility (might be relevant in particular when heavily macro-izing
code), the two templates should also have Broadcast set, just like their
X/Y-suffix-less counterparts. This in turn requires them to also have
* Dword set on their memory operands, to cover the logic added to
i386gen by 4a1b91eabbe7 ("x86: Expand Broadcast to 3 bits"),
* RegXMM/RegYMM set on their source operands, to satisfy broadcast
sizing logic in gas itself.
Otherwise ATTSyntax templates wouldn't need such operand size attributes.
While extending the test cases, also add Intel syntax broadcast forms
without explicit size specifiers.
This modifies the special __tls_get_addr stub that checks for a
tlsdesc style __tls_index entry and returns early. Not using r11
isn't much benefit at the moment but a followup patch will preserve
regs around the first call to __tls_get_addr when the __tls_index
entry isn't yet set up for an early return.
bfd/
* elf64-ppc.c (LD_R11_0R3, CMPDI_R11_0, STD_R11_0R1, LD_R11_0R1),
(MTLR_R11): Don't define.
(LD_R0_0R3, CMPDI_R0_0): Define.
(build_tls_get_addr_stub): Don't use r11 in stub.
ld/
* testsuite/ld-powerpc/tlsexe.d: Match new __tls_get_addr stub.
* testsuite/ld-powerpc/tlsexeno.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsexetocno.d: Likewise.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
When running a program with the simulator target, I get:
/home/simark/src/binutils-gdb/gdb/inferior.c:279: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.
This can be reproduced by building a GDB for --target=arm-none-gnueabi,
and running with
$ ./gdb -nx --data-directory=data-directory a.out -ex "target sim" -ex load -ex "b main" -ex r
Where a.out is any program with a main.
The problem is that gdbsim_target::wait assumes that inferior_ptid has
the value of the thread it wants to report an event for.
Actually, it's the target's responsibility to come up with the ptid of
the thread the event is for. In the sim target, that ptid is stored in
sim_inferior_data::remote_sim_ptid, so return that instead of
inferior_ptid.
ChangeLog:
* remote-sim.c (gdbsim_target::wait): Return
sim_data->remote_sim_ptid instead of inferior_ptid.
When trying to compile GDB with --target=avr, with gcc 9.2.0, I am
getting a bunch of:
/home/simark/src/binutils-gdb/sim/avr/../common/nrun.c:94:7: error: implicit declaration of function ‘abort’ [-Werror=implicit-function-declaration]
94 | abort ();
| ^~~~~
/home/simark/src/binutils-gdb/sim/avr/../common/nrun.c:94:7: error: incompatible implicit declaration of built-in function ‘abort’ [-Werror]
/home/simark/src/binutils-gdb/sim/avr/../common/nrun.c:94:7: note: include ‘<stdlib.h>’ or provide a declaration of ‘abort’
I did what the compiler told me and added the relevant includes in the
problematic files.
sim/common/ChangeLog:
* nrun.c: Include stdlib.h.
* sim-core.c: Likewise.
* sim-engine.c: Likewise.
* sim-io.c: Likewise.
* sim-module.c: Likewise.
* sim-reason.c: Likewise.
Commit 20135676fc4c3912297c313b3e0d3cbd6cc402e3 ("PR24960, Memory leak
from disassembler") added "disassemble_free_target" to opcodes. This
is used to free target-specific data when finished with a
disassembler.
This patch changes gdb to call this function where needed.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* disasm.c (~gdb_disassembler): New destructor.
(gdb_buffered_insn_length): Call disassemble_free_target.
* disasm.h (class gdb_disassembler): Declare destructor. Use
DISABLE_COPY_AND_ASSIGN.
Change-Id: I245ba5b7dec5e5d9f29cd21832c6e2b4fecef047
init_cutu_and_read_dies takes a callback function, which I've always
found somewhat difficult to follow. This patch replaces this function
with a class, and changes the callers to use it. In some cases this
allows for the removal of a helper struct and helper function as well.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* dwarf2read.c (abbrev_table_up): Move typedef earlier.
(die_reader_func_ftype): Remove.
(cutu_reader): New class.
(dw2_get_file_names_reader): Remove "data" parameter.
(dw2_get_file_names): Use cutu_reader.
(create_debug_type_hash_table): Update.
(read_cutu_die_from_dwo): Update comment.
(lookup_dwo_unit): Add dwo_name parameter.
(cutu_reader::init_tu_and_read_dwo_dies): Now a method. Remove
die_reader_func_ftype and data parameters.
(cutu_reader::cutu_reader): Rename from init_cutu_and_read_dies.
Remove die_reader_func_ftype and data parameters.
(~cutu_reader): New; from init_cutu_and_read_dies.
(cutu_reader::cutu_reader): Rename from
init_cutu_and_read_dies_no_follow. Remove die_reader_func_ftype
and data parameters.
(init_cutu_and_read_dies_simple): Remove.
(struct process_psymtab_comp_unit_data): Remove.
(process_psymtab_comp_unit_reader): Remove data parameter; add
want_partial_unit and pretend_language parameters.
(process_psymtab_comp_unit): Use cutu_reader.
(build_type_psymtabs_reader): Remove data parameter.
(build_type_psymtabs_1): Use cutu_reader.
(process_skeletonless_type_unit): Likewise.
(load_partial_comp_unit_reader): Remove.
(load_partial_comp_unit): Use cutu_reader.
(load_full_comp_unit_reader): Remove.
(load_full_comp_unit): Use cutu_reader.
(struct create_dwo_cu_data): Remove.
(create_dwo_cu_reader): Remove datap parameter; add dwo_file and
dwo_unit parameters.
(create_cus_hash_table): Use cutu_reader.
(struct dwarf2_read_addr_index_data): Remove.
(dwarf2_read_addr_index_reader): Remove.
(dwarf2_read_addr_index): Use cutu_reader.
(read_signatured_type_reader): Remove.
(read_signatured_type): Use cutu_reader.
Change-Id: I4ef2f29e73108ce94bfe97799f8f638ed272212d
In some cases, the TUI flickers when redrawing. This can be seen
mostly easily when switching layouts.
This patch fixes the problem by exploiting the double buffering that
curses already does. In some spots, the TUI will now disable flushing
the curses buffers to the screen; and then flush them all at once when
the rendering is complete.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_show_assembly): Use tui_suppress_output.
* tui/tui-wingeneral.h (class tui_suppress_output): New.
(tui_wrefresh): Declare.
* tui/tui-wingeneral.c (suppress_output): New global.
(tui_suppress_output, ~tui_suppress_output): New constructor and
destructor.
(tui_wrefresh): New function.
(tui_gen_win_info::refresh_window): Use tui_wrefresh.
(tui_gen_win_info::make_window): Call wnoutrefresh when needed.
* tui/tui-regs.h (struct tui_data_window) <no_refresh>: Declare
method.
* tui/tui-regs.c (tui_data_window::erase_data_content): Call
tui_wrefresh.
(tui_data_window::no_refresh): New method.
(tui_data_item_window::refresh_window): Call tui_wrefresh.
(tui_reg_command): Use tui_suppress_output
* tui/tui-layout.c (tui_set_layout): Use tui_suppress_output.
* tui/tui-data.h (struct tui_gen_win_info) <no_refresh>: New
method.
* tui/tui-command.c (tui_refresh_cmd_win): Call tui_wrefresh.
Change-Id: Icb832ae100b861de3af3307488e636fa928d5c9f
