This splits UNOP_LOGICAL_NOT into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_lognot): New function.
(evaluate_subexp_standard): Use it.
This splits UNOP_COMPLEMENT into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_complement): New function.
(evaluate_subexp_standard): Use it.
This splits UNOP NEG into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_neg): New function.
(evaluate_subexp_standard): Use it.
This splits UNOP_PLUS into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_plus): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_REPEAT into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_repeat): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_LEQ into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_leq): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_GEQ into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_geq): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_GTR into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_gtr): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_LESS into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_less): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_NOTEQUAL into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_notequal): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_EQUAL into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_equal): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_SUBSCRIPT into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_subscript): New function.
(evaluate_subexp_standard): Use it.
This splits out a new eval_op_binary helper function. This function
can handle several different binary operations:
case BINOP_EXP:
case BINOP_MUL:
case BINOP_DIV:
case BINOP_INTDIV:
case BINOP_REM:
case BINOP_MOD:
case BINOP_LSH:
case BINOP_RSH:
case BINOP_BITWISE_AND:
case BINOP_BITWISE_IOR:
case BINOP_BITWISE_XOR:
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_binary): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_SUB into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_sub): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_ADD into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_add): New function.
(evaluate_subexp_standard): Use it.
This splits STRUCTOP_MEMBER into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_member): New function.
(evaluate_subexp_standard): Use it.
This splits STRUCTOP_PTR into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_structop_ptr): New function.
(evaluate_subexp_standard): Use it.
This splits STRUCTOP_STRUCT into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_structop_struct): New function.
(evaluate_subexp_standard): Use it.
This splits TERNOP_SLICE into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_ternop): New function.
(evaluate_subexp_standard): Use it.
This splits BINOP_CONCAT into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_concat): New function.
(evaluate_subexp_standard): Use it.
This splits OP_OBJC_SELECTOR into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_objc_selector): New function.
(evaluate_subexp_standard): Use it.
This splits OP_STRING into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_string): New function.
(evaluate_subexp_standard): Use it.
This splits OP_REGISTER into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_register): New function.
(evaluate_subexp_standard): Use it.
This splits OP_FUNC_STATIC_VAR into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_func_static_var): New function.
(evaluate_subexp_standard): Use it.
This splits OP_VAR_MSYM_VALUE into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_var_msym_value): New function.
(evaluate_subexp_standard): Use it.
This splits OP_VAR_ENTRY_VALUE into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_var_entry_value): New function.
(evaluate_subexp_standard): Use it.
This splits OP_SCOPE into a new function for future use.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* eval.c (eval_op_scope): New function.
(evaluate_subexp_standard): Use it.
This hasn't been initialized anywhere for years. It used to be for
passing in the path to libiberty, but that stopped happening long ago.
Delete it to simplify the build logic.
This local macro doesn't take any args, so adjust the API to match.
No one really noticed as this is behind code that is not normally
built, only when a dev specifically tries to compile it.
An earlier patch of mine introduced a build failure in ada-lang.c. A
couple of "to_string" calls were not namespace-qualified. In the
failing setup, the std string_view is being used, and so (apparently)
ADL doesn't find gdb::to_string.
This patch, from the bug, fixes the problem.
gdb/ChangeLog
2021-03-06 Chernov Sergey <klen_s@mail.ru>
PR gdb/27528:
* ada-lang.c (ada_fold_name): Use gdb::to_string.
This moves dwarf2_get_dwz_file and some helper code to dwarf2/dwz.h.
The main benefit of this is just shrinking dwarf2/read.c a little bit.
gdb/ChangeLog
2021-03-06 Tom Tromey <tom@tromey.com>
* dwarf2/sect-names.h (dwarf2_elf_names): Declare.
* dwarf2/read.h (dwarf2_get_dwz_file): Move to dwz.h.
* dwarf2/read.c (dwarf2_elf_names): No longer static.
(locate_dwz_sections, dwz_search_other_debugdirs)
(dwarf2_get_dwz_file): Move to dwz.c.
* dwarf2/dwz.h (dwarf2_get_dwz_file): Move declaration from
read.h.
* dwarf2/dwz.c (locate_dwz_sections, dwz_search_other_debugdirs)
(dwarf2_get_dwz_file): Move from read.c.
debuginfod-support.h requires scoped_fd, so include the header here.
gdb/ChangeLog
2021-03-06 Tom Tromey <tom@tromey.com>
* debuginfod-support.h: Include scoped_fd.h.
If DWARF contains a reference to a "dwz" file, but there is no
.gnu_debugaltlink section, then gdb will crash. This happens because
dwarf2_get_dwz_file will return NULL, but some callers do not expect
this.
This patch changes dwarf2_get_dwz_file so that callers can require a
dwz file. Then, it updates the callers that are attempting to process
references to the dwz file to require one.
This includes a new testcase. The dwarf.exp changes don't handle the
new forms exactly correctly -- they are only handled well enough to
let this test case complete.
gdb/ChangeLog
2021-03-06 Tom Tromey <tom@tromey.com>
* dwarf2/read.h (dwarf2_get_dwz_file): Add 'require' parameter.
* dwarf2/read.c (dwarf2_get_dwz_file): Add 'require' parameter.
(get_abbrev_section_for_cu, read_attribute_value)
(get_debug_line_section): Update.
* dwarf2/macro.c (dwarf_decode_macro_bytes): Update.
gdb/testsuite/ChangeLog
2021-03-06 Tom Tromey <tom@tromey.com>
* lib/dwarf.exp (_handle_DW_FORM): Treat DW_FORM_GNU_ref_alt and
DW_FORM_GNU_strp_alt like DW_FORM_sec_offset.
* gdb.dwarf2/dwznolink.exp: New file.
This creates a new file, dwarf2/sect-names.h, and moves some
DWARF-specific type definitions from symfile.h into it.
gdb/ChangeLog
2021-03-06 Tom Tromey <tom@tromey.com>
* xcoffread.c: Include sect-names.h.
* symfile.h (struct dwarf2_section_names, struct
dwarf2_debug_sections): Move to dwarf2/sect-names.h.
* dwarf2/sect-names.h: New file, from symfile.h.
* dwarf2/read.c: Include sect-names.h.
Currently, and abbrev_info points to a separately allocated array of
attr_abbrev objects. This array is constructed in a temporary vector,
then copied to the abbrev table's obstack.
This patch changes abbrev_info to use the struct hack to store the
objects directly, and changes abbrev_table::read to avoid an extra
copy when allocating, using the "growing objects" capability of
obstacks.
This saves a bit of space, and also perhaps a little time.
2021-03-06 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_attribute): Make 'abbrev' const.
* dwarf2/abbrev.c (abbrev_table::alloc_abbrev): Remove.
(abbrev_table::read): Update.
* dwarf2/abbrev.h (struct attr_abbrev): Move earlier.
(struct abbrev_info): Reformat.
<attrs>: Now an array.
(struct abbrev_table) <alloc_abbrev>: Remove.
When linking Windows x86-64 relocatable object files to generate x86-64
ELF executable, we need to subtract __ImageBase, aka __executable_start,
for R_AMD64_IMAGEBASE relocation:
1. Add link_info to struct output_elf_obj_tdata to store linker info and
_bfd_get_link_info() to retrieve it.
2. Add ldelf_set_output_arch to set up link_info.
3. Add pex64_link_add_symbols to create an indirect reference to
__executable_start for __ImageBase to support R_AMD64_IMAGEBASE relocation
when adding symbols from Windows x86-64 relocatable object files to
generate x86-64 ELF executable.
4. Also subtract __ImageBase for R_AMD64_IMAGEBASE when generating x86-64
ELF executable.
bfd/
PR ld/27425
PR ld/27432
* bfd.c (_bfd_get_link_info): New function.
* elf-bfd.h (output_elf_obj_tdata): Add link_info.
(elf_link_info): New.
* libbfd-in.h (_bfd_get_link_info): New prototype.
* coff-x86_64.c (coff_amd64_reloc): Also subtract __ImageBase for
R_AMD64_IMAGEBASE when generating x86-64 ELF executable.
* pe-x86_64.c: Include "coff/internal.h" and "libcoff.h".
(pex64_link_add_symbols): New function.
(coff_bfd_link_add_symbols): New macro.
* libbfd.h: Regenerated.
ld/
PR ld/27425
PR ld/27432
* ldelf.c (ldelf_set_output_arch): New function.
* ldelf.h (ldelf_set_output_arch): New prototype.
* emultempl/elf.em (LDEMUL_SET_OUTPUT_ARCH): Default to
ldelf_set_output_arch.
* ld-x86-64/pe-x86-64-1.od: Expect __executable_start.
* testsuite/ld-x86-64/pe-x86-64-2.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-3.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-4.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-5.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-5.rd: Likewise.
* testsuite/ld-x86-64/pe-x86-64-6.obj.bz2: New file.
* testsuite/ld-x86-64/pe-x86-64-6.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64.exp: Run ld/27425 test.
On my setup some valgrind tests failed somewhat reliably because
the target remote | vgdb command couldn't find the vgdb-pipe files
because valgrind startup hadn't finished yet.
I tried to fix this by replacing the "Memcheck, a memory error detector"
match to "TO DEBUG THIS PROCESS USING GDB: start GDB like this" which is
right before valgrind creates the vgdb-pipe files. But even that didn't
guarantee that the vgdb-pipe files were there (maybe valgrind should
print that text after it has created them?). But also not all tests
use --vgdb-error=0, so the text isn't always printed.
To make the tests reliable I added --wait=1 to the vgdb invocation.
That tells vgdb to try to find the vgdb-pipe files, and if they aren't
there yet, to wait 1 second and try again.
gdb/testsuite/ChangeLog:
* lib/valgrind.exp (vgdb_start): Add --wait=1 to vgdbcmd.
With the following change which was made last April:
[gdb] Use partial symbol table to find language for main
commit d3214198119c1a2f9a6a2b8fcc56d8c324e1a245
The ctf reader was modified to enter all members of an enum type,
similar to what the dwarf2 reader did, into the psymtab or gdb
won't be able to find them. In addition, the empty name checking
needed to be moved down so members of a unnamed enum were not left
out.
gdb/ChangeLog:
* ctfread.c (ctf_psymtab_add_enums): New function.
(ctf_psymtab_type_cb): call ctf_psymtab_add_enums.
Added this support in read_func_kind_type after gcc started generating
CTF for function arguments.
Replaced XNEW with std::vector and NULL with nullptr.
Expanded gdb.base/ctf-ptype.exp to test function arguments. Also fixed
some typos.
gdb/ChangeLog:
* ctfread.c (read_func_kind_type): Set up function arguments.
gdb/testsuite/ChangeLog:
* gdb.base/ctf-ptype.exp: Add function tests and fix typos.
Use the current target description to include CSRs into the RISC-V
baremetal core dumps.
Every CSR declared in the current target description will be included
in the core dump.
It will be critical for users that they have the same target
description in use when loading the core file as was in use when
writing the core file. This should be fine if the user allows the
target description to be written into the core file.
In more detail, this commit adds a NT_RISCV_CSR note type. The
contents of this section is a series of either 4-byte (on RV32
targets), or 8-byte (on RV64 targets) values. Every CSR that is
mentioned in the current target description is written out in the
order the registers appear in the target description. As a
consequence it is critical that the exact same target description,
including the same register order, is in use when the CSRs are loaded
from the core file.
gdb/ChangeLog:
* riscv-none-tdep.c: Add 'user-regs.h' and 'target-description.h'
includes.
(riscv_csrset): New static global.
(riscv_update_csrmap): New function.
(riscv_iterate_over_regset_sections): Process CSRs.
A later commit will need the names of the RISC-V target description
features in files other than riscv-tdep.c. This commit just makes the
names global strings that can be accessed from other riscv-*.c files.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* riscv-tdep.c (riscv_feature_name_csr): Define.
(riscv_feature_name_cpu): Define.
(riscv_feature_name_fpu): Define.
(riscv_feature_name_virtual): Define.
(riscv_xreg_feature): Use riscv_feature_name_cpu.
(riscv_freg_feature): Use riscv_feature_name_fpu.
(riscv_virtual_feature): Use riscv_feature_name_virtual.
(riscv_csr_feature): Use riscv_feature_name_csr.
* riscv-tdep.h (riscv_feature_name_csr): Declare.
Adds support for including RISC-V control and status registers into
core files.
The value for the define NT_RISCV_CSR is set to 0x900, this
corresponds to a patch I have proposed for the Linux kernel here:
http://lists.infradead.org/pipermail/linux-riscv/2020-December/003910.html
As I have not yet heard if the above patch will be accepted into the
kernel or not I have set the note name string to "GDB", and the note
type to NT_RISCV_CSR.
This means that if the above patch is rejected from the kernel, and
the note type number 0x900 is assigned to some other note type, we
will still be able to distinguish between the GDB produced
NT_RISCV_CSR, and the kernel produced notes, where the name would be
set to "CORE".
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_riscv_csr): Declare.
* elf.c (elfcore_grok_riscv_csr): New function.
(elfcore_grok_note): Handle NT_RISCV_CSR.
(elfcore_write_riscv_csr): New function.
(elfcore_write_register_note): Handle '.reg-riscv-csr'.
binutils/ChangeLog:
* readelf.c (get_note_type): Handle NT_RISCV_CSR.
include/ChangeLog:
* elf/common.h (NT_RISCV_CSR): Define.
This commit adds the ability for bare metal RISC-V target to generate
core files from within GDB.
The intended use case is that a user will connect to a remote bare
metal target, debug up to some error condition, then generate a core
file in the normal way using:
(gdb) generate-core-file
This core file can then be used to revisit the state of the remote
target without having to reconnect to the remote target.
The core file creation code is split between two new files. In
elf-none-tdep.c is code for any architecture with the none
ABI (i.e. bare metal) when the BFD library is built with ELF support.
In riscv-none-tdep.c are the RISC-V specific parts. This is where the
regset and regcache_map_entry structures are defined that control how
registers are laid out in the core file. As this file could (in
theory at least) be used for a non-ELF bare metal RISC-V target, the
calls into elf-none-tdep.c are guarded with '#ifdef HAVE_ELF'.
Currently for RISC-V only the x-regs and f-regs (if present) are
written out. In future commits I plan to add support for writing out
the RISC-V CSRs.
The core dump format is based around generating an ELF containing
sections for the writable regions of memory that a user could be
using. Which regions are dumped rely on GDB's existing common core
dumping code, GDB will attempt to figure out the stack and heap as
well as copying out writable data sections as identified by the
original ELF.
Register information is added to the core dump using notes, just as it
is for Linux of FreeBSD core dumps. The note types used consist of
the 3 basic types you would expect in a OS based core dump,
NT_PRPSINFO, NT_PRSTATUS, NT_FPREGSET.
The layout of these notes differs slightly (due to field sizes)
between RV32 and RV64. Below I describe the data layout for each
note. In all cases, all padding fields should be set to zero.
Note NT_PRPSINFO is optional. Its data layout is:
struct prpsinfo32_t /* For RV32. */
{
uint8_t padding[32];
char fname[16];
char psargs[80];
}
struct prpsinfo64_t /* For RV64. */
{
uint8_t padding[40];
char fname[16];
char psargs[80];
}
Field 'fname' - null terminated string consisting of the basename of
(up to the fist 15 characters of) the executable. Any additional
space should be set to zero. If there's no executable name then
this field can be set to all zero.
Field 'psargs' - a null terminated string up to 80 characters in
length. Any additional space should be filled with zero. This
field contains the full executable path and any arguments passed
to the executable. If there's nothing sensible to write in this
field then fill it with zero.
Note NT_PRSTATUS is required, its data layout is:
struct prstatus32_t /* For RV32. */
{
uint8_t padding_1[12];
uint16_t sig;
uint8_t padding_2[10];
uint32_t thread_id;
uint8_t padding_3[44];
uint32_t x_regs[32];
uint8_t padding_4[4];
}
struct prstatus64_t /* For RV64. */
{
uint8_t padding_1[12];
uint16_t sig;
uint8_t padding_2[18];
uint32_t thread_id;
uint8_t padding_3[76];
uint64_t x_regs[32];
uint8_t padding_4[4];
}
Field 'sig' - the signal that stopped this thread. It's implementation
defined what this field actually means. Within GDB this will be
the signal number that the remote target reports as the stop
reason for this thread.
Field 'thread_is' - the thread id for this thread. It's implementation
defined what this field actually means. Within GDB this will be
thread thread-id that is assigned to each remote thread.
Field 'x_regs' - at index 0 we store the program counter, and at
indices 1 to 31 we store x-registers 1 to 31. x-register 0 is not
stored, its value is always zero anyway.
Note NT_FPREGSET is optional, its data layout is:
fpregset32_t /* For targets with 'F' extension. */
{
uint32_t f_regs[32];
uint32_t fcsr;
}
fpregset64_t /* For targets with 'D' extension . */
{
uint64_t f_regs[32];
uint32_t fcsr;
}
Field 'f_regs' - stores f-registers 0 to 31.
Field 'fcsr' - stores the fcsr CSR register, and is always 4-bytes.
The rules for ordering the notes is the same as for Linux. The
NT_PRSTATUS note must come before any other notes about additional
register sets. And for multi-threaded targets all registers for a
single thread should be grouped together. This is because only
NT_PRSTATUS includes a thread-id, all additional register notes after
a NT_PRSTATUS are assumed to belong to the same thread until a
different NT_PRSTATUS is seen.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add riscv-none-tdep.o.
(ALLDEPFILES): Add riscv-none-tdep.c.
* configure: Regenerate.
* configure.ac (CONFIG_OBS): Add elf-none-tdep.o when BFD has ELF
support.
* configure.tgt (riscv*-*-*): Include riscv-none-tdep.c.
* elf-none-tdep.c: New file.
* elf-none-tdep.h: New file.
* riscv-none-tdep.c: New file.
