Add another test for the output of MI command -data-disassemble. The
new check validates the format of the 'opcodes' field, specifically,
this test checks that the field contains a series of bytes, separated
by a single space.
We also check that the bytes are in the correct order, that is, the
first byte is from the lowest address, and subsequent bytes are from
increasing addresses.
The motivation for this test (besides more tests being generally good)
is that I plan to make changes to how opcode bytes are displayed in
the disassembler output, and I want to ensure that I don't break any
existing MI behaviour.
There should be no user visible changes to GDB after this commit.
This commit relaxes requirements to "fmv.s" instructions from 'F' to ('F'
or 'Zfinx'). The same applies to "fmv.d" and "fmv.q". Note that 'Zhinx'
extension already contains "fmv.h" instruction (as well as 'Zfh').
gas/ChangeLog:
* testsuite/gas/riscv/zfinx.s: Add "fmv.s" instruction.
* testsuite/gas/riscv/zfinx.d: Likewise.
* testsuite/gas/riscv/zdinx.s: Add "fmv.d" instruction.
* testsuite/gas/riscv/zdinx.d: Likewise.
* testsuite/gas/riscv/zqinx.d: Add "fmv.q" instruction.
* testsuite/gas/riscv/zqinx.s: Likewise.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Relax requirements to "fmv.[sdq]"
instructions to support those in 'Zfinx'/'Zdinx'/'Zqinx'.
This commit adds certain test cases for 'Zfinx'/'Zdinx'/'Zqinx' extensions
and reorganizes them, fixing coding style while improving coverage.
This is partially based on jiawei's 'Zhinx' testcases.
gas/ChangeLog:
* testsuite/gas/riscv/zfinx.s: Use different registers for
better encode space testing. Make indentation consistent.
Add tests for instruction with rounding mode. Change march
to minimum required extensions. Remove source line.
* testsuite/gas/riscv/zfinx.d: Likewise.
* testsuite/gas/riscv/zdinx.s: Likewise.
* testsuite/gas/riscv/zdinx.d: Likewise.
* testsuite/gas/riscv/zqinx.s: Likewise.
Also use even-numbered registers to use valid register pairs.
* testsuite/gas/riscv/zqinx.d: Likewise.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Signed-off-by: jiawei <jiawei@iscas.ac.cn>
Pre- and post-increment/decrement are side effects, the behavior of
which is undefined when combined with passing an address of the accessed
variable in the same function invocation. There's no need for the
increments here - simply adding 1 achieves the intended effect without
triggering compiler diagnostics (which are fatal with -Werror).
FENCE.TSO isn't an alias. ZIP and UNZIP in the long run likely are, but
presently they aren't. This fixes disassembly of these insns with
-Mno-aliases.
For disassembly to pick up aliases in favor of underlying insns (helping
readability in the common case), the aliases need to come ahead of the
"base" insns. Slightly more code movement is needed because of insns
with the same name needing to stay next to each other.
Note that the "rorw" alias entry also has the missing INSN_ALIAS added
here.
Clone a few testcases to exercise -Mno-aliases some more, better
covering the differences between the default and that disassembly mode.
With the command in the rule merely being "echo", i386-tbl.h won't be
rebuilt if missing, when at the same time i386-init.h is present and
up-to-date. Use a pattern rule instead to express the multiple targets
correctly (the &: rule separator is supported only by GNU make 4.3 and
newer). Note that now, for the opposite case to work (i386-tbl.h is
up-to-date but i386-init.h is missing), i386-init.h also needs
mentioning as a dependency somewhere: Add a fake dependency for
i386-opc.lo ("fake" because i386-opc.c doesn't include that header).
At the same time use $(AM_V_GEN) in the actual rule, replacing the
earlier (open-coded) "echo". And while there also drop a duplicate
dependency of i386-gen.o on i386-opc.h.
At the example of
extractps $0, %xmm0, %xmm0
insertps $0, %xmm0, %eax
(both having respectively the same mistake of using the wrong kind of
destination register) it is easy to see that current behavior is far
from ideal: The former results in "unsupported instruction" for 32-bit
code simply because the 2nd template we have is a Cpu64 one. Instead we
should aim at emitting the "best" possible error, which will typically
be the one where we passed the largest number of checks. Generalize the
original "specific_error" approach by making it apply to the entire
matching loop, utilizing that line numbers increase as we pass further
checks.
While in some cases deriving an AT&T-style suffix from an Intel syntax
memory operand size specifier is necessary, in many cases this is not
only pointless, but has led to the introduction of various workarounds:
Excessive use of IgnoreSize and NoRex64 as well as the ToDword and
ToQword attributes. Suppress suffix derivation when we can clearly tell
that the memory operand's size isn't going to be needed to infer the
possible need for the low byte/word opcode bit or an operand size prefix
(0x66 or REX.W).
As a result ToDword and ToQword can be dropped entirely, plus a fair
number of IgnoreSize and NoRex64 can also be got rid of. Note that
IgnoreSize needs to remain on legacy encoded SIMD insns with GPR
operand, to avoid emitting an operand size prefix in 16-bit mode. (Since
16-bit code using SIMD insns isn't well tested, clone an existing
testcase just enough to cover a few insns which are potentially
problematic but are being touched here.)
Note that while folding the VCVT{,T}S{S,D}2SI templates, VCVT{,T}SH2SI
isn't included there. This is to fulfill the request of not allowing L
and Q suffixes there, despite the inconsistency with VCVT{,T}S{S,D}2SI.
On openSUSE Tumbleweed, I run into:
...
FAIL: gdb.mi/mi-sym-info.exp: List all functions from debug information only
...
The problem is in matching this string:
...
{name="_start",type="void (void)",description="void _start(void);"}
...
using regexp fun_re, which requires a line field:
...
set fun_re \
"\{line=\"$decimal\",name=${qstr},type=${qstr},description=${qstr}\}"
...
Fix this by making the line field optional in fun_re.
Tested on x86_64-linux.
Currently, GNU Binutils does not support following privileged extensions:
- 'Smepmp'
- 'Svnapot'
- 'Svpbmt'
as they do not provide new CSRs or new instructions ('Smepmp' extends the
privileged architecture CSRs but does not define the CSR itself). However,
adding them might be useful as we no longer have to "filter" ISA strings
just for toolchains (if full ISA string is given by a vendor, we can
straightly use it).
And there's a fact that supports this theory: there's already an
(unprivileged) extension which does not provide CSRs or instructions (but
only an architectural guarantee): 'Zkt' (constant timing guarantee for
certain subset of RISC-V instructions).
This simple commit simply adds three privileged extensions listed above.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_supported_std_s_ext): Add 'Smepmp',
'Svnapot' and 'Svpbmt' extensions.
Clang generates a warning if there is a variable that is set but not used
otherwise ("-Wunused-but-set-variable"). On the default configuration, it
causes a build failure (unless "--disable-werror" is specified).
The only extra_lines use in arrange_linetable function is removed on the
commit 558802e4d1c5dcbd0df7d2c6ef62a6deac247a2f
("gdb: change subfile::line_vector to an std::vector"). So, this variable
should be removed to prevent a build failure.
Since commit 52b920c5d20 ("[gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp
for ppc64le"), the test-case fails with target board cc-with-debug-names, due
to missing .debug_aranges info.
Add the missing .debug_aranges info.
Also add a file_id option to Dwarf::assemble, to make it possible to contribute
to an already open file.
Tested on x86_64-linux.
Consider the test-case contained in this patch.
With g++ (7.5.0) we have for "ptype A":
...
type = class A {
public:
int a;
A(void);
~A();
}
...
and with clang++ (13.0.1):
...
type = class A {
public:
int a;
A(void);
~A(void);
}
...
and we observe that the destructor is printed differently.
There's a difference in debug info between the two cases: in the clang case,
there's one artificial parameter, but in the g++ case, there are two, and
these similar cases are handled differently in cp_type_print_method_args.
This is due to this slightly convoluted bit of code:
...
i = staticp ? 0 : 1;
if (nargs > i)
{
while (i < nargs)
...
}
else if (varargs)
gdb_printf (stream, "...");
else if (language == language_cplus)
gdb_printf (stream, "void");
...
The purpose of "i = staticp ? 0 : 1" is to skip the printing of the implicit
this parameter.
In commit 5f4d1085085 ("c++/8218: Destructors w/arguments"), skipping of other
artificial parameters was added, but using a different method: rather than
adjusting the potential loop start, it skips the parameter in the loop.
The observed difference in printing is explained by whether we enter the loop:
- in the clang case, the loop is not entered and we print "void".
- in the gcc case, the loop is entered, and nothing is printed.
Fix this by rewriting the code to:
- always enter the loop
- handle whether arguments need printing in the loop
- keep track of how many arguments are printed, and
use that after the loop to print void etc.
such that we have the same for both gcc and clang:
...
A(void);
~A(void);
...
Note that I consider the discussion of whether we want to print:
- A(void) / ~A(void), or
- A() / ~A()
out-of-scope for this patch.
Tested on x86_64-linux.
It is only used in auxv.c. Also, given it is not strictly a wrapper
around target_ops::auxv (since 27a48a9223d0 "Add auxv parsing to the
architecture vector."), I think that the name prefixed with target is a
bit misleading. Rename to just parse_auxv.
Change-Id: I41cca055b92c8ede37c258ba6583746a07d8f77e
Constify the input parameters of the various auxv parse functions, they
don't need to modify the raw auxv data.
Change-Id: I13eacd5ab8e925ec2b5c1f7722cbab39c41516ec
This patch changes various global target_desc declarations to const, thereby
correcting a prominent source of ODR violations in PowerPC-related target code.
The majority of files/changes are mechanical const-ifications accomplished by
regenerating the C files in features/.
This also required manually updating mips-linux-tdep.h, s390-linux-tdep.h,
nios2-tdep.h, s390-tdep.h, arch/ppc-linux-tdesc.h, arch/ppc-linux-common.c,
and rs6000-tdep.c.
Patch tested against the sourceware trybot, and fully regression tested against
our (Red Hat's) internal test infrastructure on Rawhide aarch64, s390x, x86_64,
and powerpcle.
With this patch, I can finally enable LTO in our GDB package builds. [Tested
with a rawhide scratch build containing this patch.]
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24835
This patch adds some missing .xml files to features/Makefile so that when the
directory's C files are regenerated, all files are appropriately remade.
This has demonstrated that there have been several "misses" in regenerating
files in this directory. Namely, arm-secext.c and sparc{32,64}-solaris.c. For
the former case, there was what essentially amounts to a typo regarding the
create feature function's name. In the later case, this file has missed at least
one important update in July, 2020, when allocate_target_description was
changed to return a unique pointer.
Those corrections are included.
GDB fails to build for me, on Ubuntu 20.04. I get:
...
CXXLD gdb
/usr/bin/ld: linux-tdep.o: in function `linux_corefile_thread(thread_info*, linux_corefile_thread_data*)':
/home/pedro/gdb/binutils-gdb/src/gdb/linux-tdep.c:1831: undefined reference to `gcore_elf_build_thread_register_notes(gdbarch*, thread_info*, gdb_signal, bfd*, std::unique_ptr<char, gdb::xfree_deleter<char> >*, int*)'
/usr/bin/ld: linux-tdep.o: in function `linux_make_corefile_notes(gdbarch*, bfd*, int*)':
/home/pedro/gdb/binutils-gdb/src/gdb/linux-tdep.c:2117: undefined reference to `gcore_elf_make_tdesc_note(bfd*, std::unique_ptr<char, gdb::xfree_deleter<char> >*, int*)'
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:2149: gdb] Error 1
make[2]: Leaving directory '/home/pedro/gdb/binutils-gdb/build/gdb'
make[1]: *** [Makefile:11847: all-gdb] Error 2
make[1]: Leaving directory '/home/pedro/gdb/binutils-gdb/build'
make: *** [Makefile:1004: all] Error 2
Those undefined functions exist in gdb/gcore-elf.c, which is only
included in the build if GDB's configure thinks that the target you're
configuring for is an ELF target. GDB's configure thinks my system
isn't ELF, which is incorrect.
For the ELF support check, gdb/config.log shows:
configure:17387: checking for ELF support in BFD
configure:17407: gcc -o conftest -I/home/pedro/gdb/binutils-gdb/src/gdb/../include -I../bfd -I/home/pedro/gdb/binutils-gdb/src/gdb/../bfd -g3 -O0 -L../bfd -L../libiberty -lzstd conftest.c -lbfd -liberty -lz -lncursesw -lm -ldl >&5
/usr/bin/ld: ../bfd/libbfd.a(compress.o): in function `decompress_contents':
/home/pedro/gdb/binutils-gdb/src/bfd/compress.c:42: undefined reference to `ZSTD_decompress'
/usr/bin/ld: /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:44: undefined reference to `ZSTD_isError'
/usr/bin/ld: ../bfd/libbfd.a(compress.o): in function `bfd_compress_section_contents':
/home/pedro/gdb/binutils-gdb/src/bfd/compress.c:195: undefined reference to `ZSTD_compress'
/usr/bin/ld: /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:198: undefined reference to `ZSTD_isError'
collect2: error: ld returned 1 exit status
configure:17407: $? = 1
...
configure:17417: result: no
Note how above, in the gcc command line, "-lzstd" appears before
"-lbfd". That explain the link failure. It should appear after, like
-lz does.
This commit fixes it, by moving ZSTD_LIBS from LDFLAGS to LIBS, next
to -lz, in GDB_AC_CHECK_BFD, and regenerating gdb/configure.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29630
Change-Id: I1f4128dde634e8ea04c9002904f1005a8b3a6863
A user noticed that gdb would assert when printing a certain array
with array-indexes enabled. This turned out to be caused by the array
having an index type of Character, which is completely valid in Ada.
This patch changes the Ada support to recognize Character as a
discrete type, and adds some tests.
Because this is Ada-specific and was also reviewed internally, I am
checking it in.
Binutils can be configured to avoid printing the execstack or RWD
segment warnings. In this case, the first test of PR ld/29072 will fail.
Fix that by always manually forcing the warnings for it.
ld/ChangeLog:
* testsuite/ld-elf/elf.exp (PR ld/29072): Force execstack and
RWD segment warnings.
Multi-line patterns for grep are not supported on some old versions
of grep.
binutils/
* embedspu.sh: Replace multi-line grep with sed.
ld/
* testsuite/ld-elfvers/vers.exp: Replace multi-line grep with sed.
Apparently some distros have a nagging egrep that helpfully tells you
egrep is deprecated and to use "grep -E". The nag message causes a ld
testsuite failure. What's more the advice isn't that good. The "-E"
flag may not be available with older versions of grep.
This patch fixes bare invocation of egrep within binutils, replacing
it with the autoconf $EGREP or with grep.
config/
* lib-ld.m4 (AC_LIB_PROG_LD_GNU): Require AC_PROG_EGREP and
invoke $EGREP.
(AC_LIB_PROG_LD): Likewise.
binutils/
* configure: Regenerate.
* embedspu.sh: Replace egrep with grep.
gold/
* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
Replace egrep with grep.
* testsuite/Makefile.in: Regenerate.
* testsuite/bnd_ifunc_1.sh: Replace egrep with $EGREP.
* testsuite/bnd_ifunc_2.sh: Likewise.
* testsuite/bnd_plt_1.sh: Likewise.
* testsuite/discard_locals_test.sh: Likewise.
* testsuite/gnu_property_test.sh: Likewise.
* testsuite/no_version_test.sh: Likewise.
* testsuite/pr18689.sh: Likewise.
* testsuite/pr26936.sh: Likewise.
* testsuite/retain.sh: Likewise.
* testsuite/split_i386.sh: Likewise.
* testsuite/split_s390.sh: Likewise.
* testsuite/split_x32.sh: Likewise.
* testsuite/split_x86_64.sh: Likewise.
* testsuite/ver_test_pr16504.sh: Likewise.
intl/
* configure: Regenerate.
ld/
* testsuite/ld-elfvers/vers.exp (test_ar): Replace egrep with grep.
The segv was on "info->strs[strsize - 1] = 0;" with strsize zero. OK,
if strsize is zero we don't have any filenames in stabs so no useful
info.
* syms.c (_bfd_stab_section_find_nearest_line): Exit if either
stabsize or strsize is zero.
Clang generates a warning if there is a variable that is set but not used
otherwise ("-Wunused-but-set-variable"). On the default configuration, it
causes a build failure (unless "--disable-werror" is specified).
Because the cause of this error is in the Bison-generated code
($(srcdir)/gold/yyscript.y -> $(builddir)/gold/yyscript.c),
this commit suppresses this warning ("-Wunused-but-set-variable") by placing
DIAGNOSTIC_IGNORE_UNUSED_BUT_SET_VARIABLE macro at the end of user
prologue on yyscript.y.
* yyscript.y: Suppress -Wunused-but-set-variable warning on
the Bison-generated code.
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
