* read.h (mri_comon_symbol): Declare.
(s_mri_common): Declare.
* read.c (mri_line_label): New static variable.
(mri_common_symbol): New global variable.
(potable): Add "common" and "common.s".
(read_a_source_file): In MRI mode, set mri_line_label for a label
at the start of a line.
(s_mri_common): New function.
(s_space): Handle mri_common_symbol.
* symbols.c (colon): Change return value from void to symbolS *,
and return new symbol. If mri_common_symbol is set, attach the
new symbol to it.
(resolve_symbol_value): Handle an sy_mri_common symbol.
* symbols.h (colon): Change return value in declaration.
* subsegs.c (subseg_set_rest): Clear mri_common_symbol.
(subseg_set (both versions)): Likewise.
* frags.c (frag_more): Warn if mri_common_symbol is not NULL.
* write.c (adjust_reloc_syms): Skip sy_mri_common symbols.
(write_object_file): Discard sy_mri_common symbols.
(fixup_segment): Change relocations against sy_mri_common symbols
to be against the common symbol itself.
* config/obj-coff.c (yank_symbols): Discard sy_mri_common symbols.
(fixup_segment): Change relocations against sy_mri_common symbols
to be against the common symbol itself.
* config/obj-aout.c (obj_crawl_symbol_chain): Discard
sy_mri_common symbols.
* rs6000-core.c (CORE_DATA_SIZE_FIELD): New macro to get a the size
of a core dump's data section. Provide alternate definition for aix4.
(SAVE_FIELD): Similarly for save state field (register info).
(STACK_END_ADDR): Provide definition suitable for aix4.
* config/{aix4.mh,aix4.mt}: New configuration files.
* hosts/aix4.h: Likewise.
Mike's aix4 changes, slightly modified.
LINKER_RELAXING_SHRINKS_ONLY is defined.
* config/tc-i960.h (LINKER_RELAXING_SHRINKS_ONLY): Define it.
* doc/internals.texi (Relaxation): Write up some stuff on linker relaxing and
LINKER_RELAXING_SHRINKS_ONLY.
* gas/m68k/op68000.d: New test.
* gas/m68k/cas.s, gas/m68k/cas.d: New test.
* gas/m68k/bitfield.s, gas/m68k/bitfield.d: New test.
* gas/m68k/schwab.d: Run objdump with -j .text. Adjust for
changes to disassembler.
* gas/m68k/all.exp: Run new tests. Run schwab test for
m68k-*-coff*.
including support for Motorola syntax.
* config/m68k-parse.h: New file; definitions shared between
m68k-parse.y and tc-m68k.c.
* config/tc-m68k.c: Include m68k-parse.h.
(enum operand_type): Move to m68k-parse.h, where it is named
m68k_operand_type. Rename all uses. Rearrange somewhat. Add
FPREG. Rename AOFF to DISP. Rename AINDX to BASE. Rename APODX
to POST. Rename APRDX to PRE. Remove AMIND. Rename MSCR to
CONTROL. Remove DINDR.
(struct m68k_exp): Move to m68k-parse.h. Remove e_beg, e_end and
e_seg fields. Rename e_exp to exp. Rename e_siz to size, and
change type to enum m68k_size. Change all uses.
(enum _register): Move to m68k-parse.h, where it is named
m68k_register. Rename all uses. Add ZDATA0-7 and ZADDR0-7.
(struct m68k_op): Move to m68k-parse.h. Change all fields.
(seg): Don't define.
(add_exp): Remove.
(FAIL, OK): Remove.
(m68k_reg_parse): Move to m68k-parse.y, and rewrite.
(SKIP_WHITE, SKIP_W): Remove.
(try_moto_index, try_index): Remove.
(m68k_ip_op): Move to m68k-parse.y, and rewrite to use grammar.
(main): Remove obsolete test function.
(m68k_ip): Extensive changes to use new grammar.
(get_regs): Remove.
(crack_operand): m68k_ip_op now returns 0 on success.
(init_table): Add ssp, zd0-7 and za0-7.
(md_assemble): Make er const. Correct loop over operands when
looking for error message.
(md_begin): Set alt_notend_table for '(' and '@'.
(get_num): Expression is already parsed. Don't set seg.
* configure.in: If cpu_type is m68k, put m68k-parse.o in
extra-objects.
* configure: Rebuild.
* Makefile.in (DISTSTUFF): Add m68k-parse.c.
(BISON): Use ../bison/bison if it exists.
(BISONFLAGS): Define as empty.
(TARG_CPU_DEP_m68k): Depend upon $(srcdir)/config/m68k-parse.h.
(m68k-parse.c, m68k-parse.o): New targets.
(reg_names): Likewise.
(print_insn_arg): Don't explicitly print % before register names.
Add % before register names in static array names. In case 'r',
print data registers as `@(Dn)', not `Dn@'. When printing a
memory address, don't print @# before it.
(print_indexed): Change base_disp and outer_disp from int to
bfd_vma. Print using MIT syntax, not mutant invalid Motorola
syntax. Sign extend 8 byte displacement correctly.
(print_base): Print using MIT syntax. Print zpc when appropriate.
Change parameter disp from int to bfd_vma.
* gdb.disasm/sh3.exp: Run the sh3 disassembler tests.
* gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment.
* gdb.disasm/sh3.mt: Makefile fragment for sh3 ests.
sh3e disassembler tests. Sanitized out for now.
F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
* sh-opc.h (sh_arg_type): Add new operand types.
(sh_table): Add new opcodes from SH3E Floating Point ISA.
sh3e stuff. Sanitized out for now.
corefile.exp from linuxaout to all linux.
* gdb.base/sigall.exp (test_one_sig): Specifically deal with
cases where we miss the breakpoint at the signal handler
for some reason. Setup xfail for linuxoldld/linuxaout and
getting SIGIO. Setup xfail for linuxoldld/linuxaout for
hitting SIGURG breakpoint.
* gdb.base/signals.exp: Setup xfail for "next" acting like
continue to add linuxoldld. Setup xfail for all linux for
"next to handler in signals_tests_1", "backtrace in
signals_tests_1", "continue to func1", "pass SIGUSR1",
and continue to handler".
(SKIP_TRAMPOLINE_CODE): Define.
* alpha-tdep.c (alpha_frame_saved_pc): Use pc_reg field from
frame to find the saved pc register.
(alpha_saved_pc_after_call): Skip over shared library trampoline
before trying to find the saved pc register.
(find_proc_desc): Copy PROC_PC_REG from found proc_desc
to heuristic proc_desc.
(init_extra_frame_info): Initialize pc_reg field in frame.
(struct m68k_incant): Change m_operands field to be const.
(struct m68k_it): Change args field to be const.
(m68k_ip): Change local variable s to be const.
(opcode_ptr): Remove.
(md_begin): Use m68k_numopcodes, not numopcodes. Use
m68k_opcodes, not removed opcode_ptr. Use m68k_numaliases, not
numaliases.
Clean up tables.
* m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
(opcode): Remove.
(print_insn_m68k): Change d to be const. Use m68k_numopcodes
rather than numopcodes. Use m68k_opcodes rather than removed
opcode function. Don't check F_ALIAS.
(print_insn_arg): Change first parameter to be const char *.
* Makefile.in (ALL_MACHINES): Add m68k-opc.o.
(m68k-opc.o): New target.
* configure.in: Build m68k-opc.o for bfd_m68k_arch.
* configure: Rebuild.
declarations. Remove F_ALIAS and flag field of struct
m68k_opcode. Change arch field of struct m68k_opcode to unsigned
int. Make name and args fields of struct m68k_opcode const.
