dd7efa7915
PowerPC add initial -mfuture instruction support
...
This patch adds initial 64-bit insn assembler/disassembler support.
The only instruction added is "pnop" along with the automatic aligning
of prefix instruction so they do not cross 64-byte boundaries.
include/
* dis-asm.h (WIDE_OUTPUT): Define.
* opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare.
(PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX),
(PPC_PREFIX_P, PPC_PREFIX_SEG): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "future" entry.
(PREFIX_OPCD_SEGS): Define.
(prefix_opcd_indices): New array.
(disassemble_init_powerpc): Initialize prefix_opcd_indices.
(lookup_prefix): New function.
(print_insn_powerpc): Handle 64-bit prefix instructions.
* ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK),
(PMRR, POWERXX): Define.
(prefix_opcodes): New instruction table.
(prefix_num_opcodes): New constant.
binutils/
* objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes.
(struct insn_label_list): New.
(insn_labels, free_insn_labels): New variables.
(ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs.
(ppc_frob_label, ppc_new_dot_label): Move functions earlier in file
and call ppc_record_label.
(md_assemble): Handle 64-bit prefix instructions. Align labels
that are on the same line as a prefix instruction.
* config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to
later in the file.
(md_start_line_hook): Define.
(ppc_start_line_hook): Declare.
* testsuite/gas/ppc/prefix-align.d,
* testsuite/gas/ppc/prefix-align.s: New test.
* testsuite/gas/ppc/ppc.exp: Run new test.
2019-05-24 10:24:45 +09:30
96a86c01d1
PR24390, Don't decode mtfsb field as a cr field
...
"mtfsb0 4*cr7+lt" doesn't make all that much sense, but unfortunately
glibc uses just that instead of "mtfsb0 28" to clear the fpscr xe bit.
So for backwards compatibility accept cr field expressions when
assembling mtfsb operands, but disassemble to a plain number.
PR 24390
include/
* opcode/ppc.h (PPC_OPERAND_CR_REG): Comment.
opcodes/
* ppc-opc.c (BTF): Define.
(powerpc_opcodes): Use for mtfsb*.
* ppc-dis.c (print_insn_powerpc): Print fields with both
PPC_OPERAND_CR_REG and PPC_OPERAND_CR_BIT as a plain number.
gas/
* testsuite/gas/ppc/476.d: Update mtfsb*.
* testsuite/gas/ppc/a2.d: Likewise.
2019-03-28 15:21:05 +10:30
827041555a
Update year range in copyright notice of binutils files
2019-01-01 22:06:53 +10:30
d1a3c973fa
PR24028, PPC_INT_FMT
...
PPC_INT_FMT is redundant now that bfd.h pulls in inttypes.h if
available. Apparently MacOS Mojave defines int64_t as long long even
though long is also 64 bits, which confuses the logic selecting
PPC_INT_FMT (and BFD_PRI64 too). Hopefully inttypes.h is available on
Mojave.
PR 24028
include/
* opcode/ppc.h (PPC_INT_FMT): Delete.
opcodes/
* ppc-dis.c (print_insn_powerpc): Replace PPC_INT_FMT uses with
PRId64/PRIx64.
2018-12-28 15:02:04 +10:30
bb6bf75e7a
PowerPC @l, @h and @ha warnings, plus VLE e_li
...
This patch started off just adding the warnings in tc-ppc.c about
incorrect usage of @l, @h and @ha in instructions that don't have
16-bit D-form fields. That unfortunately showed up three warnings in
ld/testsuite/ld-powerpc/vle-multiseg.s on instructions like
e_li r3, IV_table@l+0x00
which was being assembled to
8: 70 60 00 00 e_li r3,0
a: R_PPC_ADDR16_LO IV_table
The ADDR16_LO reloc is of course completely bogus on e_li, which has
a split 20-bit signed integer field in bits 0x1f7fff, the low 11 bit
in 0x7ff, the next 5 bits in 0x1f0000, and the high 4 bits in 0x7800.
Applying an ADDR16_LO reloc to the instruction potentially changes
the e_li instruction to e_add2i., e_add2is, e_cmp16i, e_mull2i,
e_cmpl16i, e_cmph16i, e_cmphl16i, e_or2i, e_and2i., e_or2is, e_lis,
e_and2is, or some invalid encodings.
Now there is a relocation that suits e_li, R_PPC_VLE_ADDR20, which was
added 2017-09-05 but I can't see code in gas to generate the
relocation. In any case, VLE_ADDR20 probably doesn't have the correct
semantics for @l since ideally you'd want an @l to pair with @h or @ha
to generate a 32-bit constant. Thus @l should only produce a 16-bit
value, I think. So we need some more relocations to handle e_li it
seems, or as I do in this patch, modify the behaviour of existing
relocations when applied to e_li instructions.
include/
* opcode/ppc.h (E_OPCODE_MASK, E_LI_MASK, E_LI_INSN): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_VLE_ADDR20>): Correct
mask and shift value.
(ppc_elf_vle_split16): Use E_OPCODE_MASK. Handle e_li
specially.
gas/
* config/tc-ppc.c (md_assemble): Adjust relocs for VLE before
TLS tweaks. Handle e_li. Warn on unexpected operand field
for lo16/hi16/ha16 relocs.
2018-12-06 23:01:03 +10:30
9cf7e5687f
Use operand->extract to provide defaults for optional PowerPC operands
...
Most optional operands to powerpc instructions use a default value of
zero, but there are a few exceptions. Those have been handled by
PPC_OPERAND_OPTIONAL_VALUE and an entry in the powerpc_operands table
for the default value, smuggled in the shift field. This patch
changes that to using the operand extract function to provide non-zero
defaults.
I've also moved the code determining whether optional operands are
provided or omitted, to the point the first optional operand is seen,
and allowed for the possibility of optional base register operands
in a future patch.
The patch does change the error you get on invalid assembly like
ld 3,4
You'll now see "missing operand" rather than
"syntax error; end of line, expected `('".
gas/
* config/tc-ppc.c (md_assemble): Delay counting of optional
operands until one is encountered. Allow for the possibility
of optional base regs, ie. PPC_OPERAND_PARENS. Call
ppc_optional_operand_value with extra args.
include/
* opcode/ppc.h (struct powerpc_operand): Correct "insert" comment.
Mention use of "extract" function to provide default value.
(PPC_OPERAND_OPTIONAL_VALUE): Delete.
(ppc_optional_operand_value): Rewrite to use extract function.
opcodes/
* ppc-dis.c (operand_value_powerpc): Init "invalid".
(skip_optional_operands): Count optional operands, and update
ppc_optional_operand_value call.
* ppc-opc.c (extract_dxdn): Remove ATTRIBUTE_UNUSED from used arg.
(extract_vlensi): Likewise.
(extract_fxm): Return default value for missing optional operand.
(extract_ls, extract_raq, extract_tbr): Likewise.
(insert_sxl, extract_sxl): New functions.
(insert_esync, extract_esync): Remove Power9 handling and simplify.
(powerpc_operands <FXM4, TBR>): Delete PPC_OPERAND_OPTIONAL_VALUE
flag and extra entry.
(powerpc_operands <SXL>): Likewise, and use insert_sxl and
extract_sxl.
2018-08-21 16:05:36 +09:30
fa758a7046
PowerPC Improve support for Gekko & Broadway
...
This is a relatively straightforward patch to improve support for the
IBM Gekko and IBM Broadway processors. Broadway is functionally
equivalent to the IBM 750CL, while Gekko's functionality is a subset
of theirs. The patch simplifies this reality and adds -mgekko and
-mbroadway as aliases for -m750cl. I didn't feel it was worth wasting
a PPC_OPCODE_* bit to differentiate Gekko. The patch adds a number of
simplified mnemonics for special purpose register access. Notably,
Broadway adds 4 additional IBAT and DBAT registers but these are not
assigned sequential SPR numbers.
gas/
* config/tc-ppc.c (md_show_usage): Add -mgekko and -mbroadway.
* doc/as.texi (Target PowerPC options): Add -mgekko and -mbroadway.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* testsuite/gas/ppc/broadway.d,
* testsuite/gas/ppc/broadway.s: New test for broadway.
* testsuite/gas/ppc/ppc.exp: Run new test.
include/
* opcode/ppc.h (PPC_OPCODE_750): Adjust comment.
opcodes/
* ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway.
(powerpc_init_dialect): Handle bfd_mach_ppc_750.
* ppc-opc.c (insert_sprbat, extract_sprbat): New functions to
support disjointed BAT.
(powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR.
(XSPRGQR_MASK, GEKKO, BROADWAY): Define.
(powerpc_opcodes): Add 750cl extended mnemonics for spr access.
2018-07-26 17:42:47 +09:30
98553ad33e
Remove fake operand handling for extended mnemonics.
...
opcodes/
* ppc-opc.c (insert_bat, extract_bat, insert_bba, extract_bba,
insert_rbs, extract_rbs, insert_xb6s, extract_xb6s): Delete functions.
(insert_bab, extract_bab, insert_btab, extract_btab,
insert_rsb, extract_rsb, insert_xab6, extract_xab6): New functions.
(BAT, BBA VBA RBS XB6S): Delete macros.
(BTAB, BAB, VAB, RAB, RSB, XAB6): New macros.
(BB, BD, RBX, XC6): Update for new macros.
(powerpc_opcodes) <evmr, evnot, vmr, vnot, crnot, crclr, crset,
crmove, not, not., mr, mr., xxspltd, xxswapd, xvmovsp, xvmovdp,
e_crnot, e_crclr, e_crset, e_crmove>: Likewise.
* ppc-dis.c (print_insn_powerpc): Delete handling of fake operands.
include/
* opcode/ppc.h (PPC_OPERAND_FAKE): Delete macro.
gas/
* config/tc-ppc.c (md_assemble): Delete handling of fake operands.
* testsuite/gas/ppc/common.s (crmove, cror, or., or, nor., nor): Add
test of extended mnemonics.
* testsuite/gas/ppc/common.d: Likewise. Don't match instruction offset.
* testsuite/gas/ppc/spe.s (evor, evnor): Add test of extended mnemonics.
* testsuite/gas/ppc/spe.d: Likewise. Don't match instruction offset.
2018-05-21 17:31:07 -05:00
2ceb7719f7
Cleanup ppc code dealing with opcode dumps.
...
include/
* opcode/ppc.h (powerpc_num_opcodes): Change type to unsigned.
(vle_num_opcodes): Likewise.
(spe2_num_opcodes): Likewise.
opcodes/
* ppc-opc.c (powerpc_num_opcodes): Likewise.
(vle_num_opcodes): Likewise.
(spe2_num_opcodes): Likewise.
* ppc-dis.c (disassemble_init_powerpc) <powerpc_opcd_indices>: Rewrite
initialization loop.
(disassemble_init_powerpc) <vle_opcd_indices>: Likewise.
(disassemble_init_powerpc) <spe2_opcd_indices>: Likewise. Initialize
only once.
gas/
* config/tc-ppc.c (ppc_setup_opcodes) <powerpc_opcodes>: Rewrite code
to dump the entire opcode table.
(ppc_setup_opcodes) <spe2_opcodes>: Likewise.
(ppc_setup_opcodes) <vle_opcodes>: Likewise. Fix calculation of
opcode index.
2018-05-07 09:40:59 -05:00
219d1afa89
Update year range in copyright notice of binutils files
2018-01-03 17:49:56 +10:30
0f873fd58b
Use consistent types for holding instructions, instruction masks, etc.
...
include/
* opcode/ppc.h (PPC_INT_FMT): Define.
(struct powerpc_opcode) <opcode>: Update type.
(struct powerpc_opcode) <mask>: Likewise.
(struct powerpc_opcode) <bitm>: Likewise.
(struct powerpc_opcode) <insert>: Likewise.
(struct powerpc_opcode) <extract>: Likewise.
(ppc_optional_operand_value): Likewise.
gas/
* config/tc-ppc.c (last_insn): Update type.
(insn_validate) <omask, mask>: Likewise.
(ppc_setup_opcodes) <mask, right_bit>: Likewise.
<PRINT_OPCODE_TABLE>: Update types and printf format specifiers.
(ppc_insert_operand): Update return and argument types and remove
unneeded type casts.
<min, max, right, tmp>: Update type.
(md_assemble): Remove unneeded type casts.
<insn, val, tmp_insn>: Update type.
opcodes/
* opcodes/ppc-dis.c (disassemble_init_powerpc): Fix white space.
(operand_value_powerpc): Update return and argument type.
<value, top>: Update type.
(skip_optional_operands): Update argument type.
(lookup_powerpc): Likewise.
(lookup_vle): Likewise.
<table_opcd, table_mask, insn2>: Update type.
(lookup_spe2): Update argument type.
<table_opcd, table_mask, insn2>: Update type.
(print_insn_powerpc) <insn, value>: Update type.
Use PPC_INT_FMT for printing instructions and operands.
* opcodes/ppc-opc.c (insert_arx, extract_arx, insert_ary, extract_ary,
insert_rx, extract_rx, insert_ry, extract_ry, insert_bat, extract_bat,
insert_bba, extract_bba, insert_bdm, extract_bdm, insert_bdp,
extract_bdp, valid_bo_pre_v2, valid_bo_post_v2, valid_bo, insert_bo,
extract_bo, insert_boe, extract_boe, insert_dcmxs, extract_dcmxs,
insert_dxd, extract_dxd, insert_dxdn, extract_dxdn, insert_fxm,
extract_fxm, insert_li20, extract_li20, insert_ls, extract_ls,
insert_esync, extract_esync, insert_mbe, extract_mbe, insert_mb6,
extract_mb6, extract_nb, insert_nbi, insert_nsi, extract_nsi,
insert_ral, extract_ral, insert_ram, extract_ram, insert_raq,
extract_raq, insert_ras, extract_ras, insert_rbs, extract_rbs,
insert_rbx, extract_rbx, insert_sci8, extract_sci8, insert_sci8n,
extract_sci8n, insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w,
insert_oimm, extract_oimm, insert_sh6, extract_sh6, insert_spr,
extract_spr, insert_sprg, extract_sprg, insert_tbr, extract_tbr,
insert_xt6, extract_xt6, insert_xtq6, extract_xtq6, insert_xa6,
extract_xa6, insert_xb6, extract_xb6, insert_xb6s, extract_xb6s,
insert_xc6, extract_xc6, insert_dm, extract_dm, insert_vlesi,
extract_vlesi, insert_vlensi, extract_vlensi, insert_vleui,
extract_vleui, insert_vleil, extract_vleil, insert_evuimm1_ex0,
extract_evuimm1_ex0, insert_evuimm2_ex0, extract_evuimm2_ex0,
insert_evuimm4_ex0, extract_evuimm4_ex0, insert_evuimm8_ex0,
extract_evuimm8_ex0, insert_evuimm_lt8, extract_evuimm_lt8,
insert_evuimm_lt16, extract_evuimm_lt16, insert_rD_rS_even,
extract_rD_rS_even, insert_off_lsp, extract_off_lsp, insert_off_spe2,
extract_off_spe2, insert_Ddd, extract_Ddd): Update types.
(OP, OPTO, OPL, OPVUP, OPVUPRT, A, AFRALFRC_MASK, B, BD8, BD8IO, BD15,
BD24, BBO, Y_MASK , AT1_MASK, AT2_MASK, BBOCB, C_LK, C, CTX, UCTX,
DX, EVSEL, IA16, I16A, I16L, IM7, LI20, MME, MD, MDS, SC, SC_MASK,
SCI8, SCI8BF, SD4, SE_IM5, SE_R, SE_RR, VX, VX_LSP, VX_RA_CONST,
VX_RB_CONST, VX_SPE_CRFD, VX_SPE2_CLR, VX_SPE2_SPLATB, VX_SPE2_OCTET,
VX_SPE2_DDHH, VX_SPE2_HH, VX_SPE2_EVMAR, VX_SPE2_EVMAR_MASK, VXA,
VXR, VXASH, X, EX, XX2, XX3, XX3RC, XX4, Z, XWRA_MASK, XLRT_MASK,
XRLARB_MASK, XLRAND_MASK, XRTLRA_MASK, XRTLRARB_MASK, XRTARARB_MASK,
XRTBFRARB_MASK, XOPL, XOPL2, XRCL, XRT, XRTRA, XCMP_MASK, XCMPL_MASK,
XTO, XTLB, XSYNC, XEH_MASK, XDSS, XFL, XISEL, XL, XLO, XLYLK, XLOCB,
XMBAR, XO, XOPS, XS, XFXM, XSPR, XUC, XW, APU): Update types in casts.
2017-12-01 11:20:15 -06:00
7408194835
[PowerPC VLE] Add SPE2 and EFS2 instructions support
...
include/
* opcode/ppc.h:
(spe2_opcodes, spe2_num_opcodes): New.
(PPC_OPCODE_SPE2): New define.
(PPC_OPCODE_EFS2): Likewise.
(SPE2_XOP): Likewise.
(SPE2_XOP_TO_SEG): Likewise.
opcodes/
* ppc-dis.c (ppc_mopt): Add PPC_OPCODE_SPE2 and
PPC_OPCODE_EFS2 flag to "e200z4" entry.
New entries efs2 and spe2.
Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "vle" entry.
(SPE2_OPCD_SEGS): New macro.
(spe2_opcd_indices): New.
(disassemble_init_powerpc): Handle SPE2 opcodes.
(lookup_spe2): New function.
(print_insn_powerpc): call lookup_spe2.
* ppc-opc.c (insert_evuimm1_ex0): New function.
(extract_evuimm1_ex0): Likewise.
(insert_evuimm_lt8): Likewise.
(extract_evuimm_lt8): Likewise.
(insert_off_spe2): Likewise.
(extract_off_spe2): Likewise.
(insert_Ddd): Likewise.
(extract_Ddd): Likewise.
(DD): New operand.
(EVUIMM_LT8): Likewise.
(EVUIMM_LT16): Adjust.
(MMMM): New operand.
(EVUIMM_1): Likewise.
(EVUIMM_1_EX0): Likewise.
(EVUIMM_2): Adjust.
(NNN): New operand.
(VX_OFF_SPE2): Likewise.
(BBB): Likewise.
(DDD): Likewise.
(VX_MASK_DDD): New mask.
(HH): New operand.
(VX_RA_CONST): New macro.
(VX_RA_CONST_MASK): Likewise.
(VX_RB_CONST): Likewise.
(VX_RB_CONST_MASK): Likewise.
(VX_OFF_SPE2_MASK): Likewise.
(VX_SPE_CRFD): Likewise.
(VX_SPE_CRFD_MASK VX): Likewise.
(VX_SPE2_CLR): Likewise.
(VX_SPE2_CLR_MASK): Likewise.
(VX_SPE2_SPLATB): Likewise.
(VX_SPE2_SPLATB_MASK): Likewise.
(VX_SPE2_OCTET): Likewise.
(VX_SPE2_OCTET_MASK): Likewise.
(VX_SPE2_DDHH): Likewise.
(VX_SPE2_DDHH_MASK): Likewise.
(VX_SPE2_HH): Likewise.
(VX_SPE2_HH_MASK): Likewise.
(VX_SPE2_EVMAR): Likewise.
(VX_SPE2_EVMAR_MASK): Likewise.
(PPCSPE2): Likewise.
(PPCEFS2): Likewise.
(vle_opcodes): Add EFS2 and some missing SPE opcodes.
(powerpc_macros): Map old SPE instructions have new names
with the same opcodes. Add SPE2 instructions which just are
mapped to SPE2.
(spe2_opcodes): Add SPE2 opcodes.
gas/
* config/tc-ppc.c:
(md_parse_option): Add mspe2 switch.
(md_show_usage): Document -mspe2.
(ppc_setup_opcodes): Handle spe2_opcodes.
* doc/as.texinfo: Document -mspe2.
* doc/c-ppc.texi: Likewise.
* testsuite/gas/ppc/efs.d: New file.
* testsuite/gas/ppc/efs.s: Likewise.
* testsuite/gas/ppc/efs2.d: Likewise.
* testsuite/gas/ppc/efs2.s: Likewise.
* testsuite/gas/ppc/ppc.exp: Run new tests.
* testsuite/gas/ppc/spe.d: New file.
* testsuite/gas/ppc/spe.s: Likewise.
* testsuite/gas/ppc/spe2-checks.d: Likewise.
* testsuite/gas/ppc/spe2-checks.l: Likewise.
* testsuite/gas/ppc/spe2-checks.s: Likewise.
* testsuite/gas/ppc/spe2.d: Likewise.
* testsuite/gas/ppc/spe2.s: Likewise.
* testsuite/gas/ppc/spe_ambiguous.d: Likewise.
* testsuite/gas/ppc/spe_ambiguous.s: Likewise.
2017-08-24 17:30:31 +09:30
e3c2f928b8
[PowerPC VLE] Add LSP (Lightweight Signal Processing) instruction support
...
include/
* opcode/ppc.h (PPC_OPCODE_LSP): New define.
opcodes/
* ppc-opc.c (insert_evuimm2_ex0): New function.
(extract_evuimm2_ex0): Likewise.
(insert_evuimm4_ex0): Likewise.
(extract_evuimm4_ex0): Likewise.
(insert_evuimm8_ex0): Likewise.
(extract_evuimm8_ex0): Likewise.
(insert_evuimm_lt16): Likewise.
(extract_evuimm_lt16): Likewise.
(insert_rD_rS_even): Likewise.
(extract_rD_rS_even): Likewise.
(insert_off_lsp): Likewise.
(extract_off_lsp): Likewise.
(RD_EVEN): New operand.
(RS_EVEN): Likewise.
(RSQ): Adjust.
(EVUIMM_LT16): New operand.
(HTM_SI): Adjust.
(EVUIMM_2_EX0): New operand.
(EVUIMM_4): Adjust.
(EVUIMM_4_EX0): New operand.
(EVUIMM_8): Adjust.
(EVUIMM_8_EX0): New operand.
(WS): Adjust.
(VX_OFF): New operand.
(VX_LSP): New macro.
(VX_LSP_MASK): Likewise.
(VX_LSP_OFF_MASK): Likewise.
(PPC_OPCODE_LSP): Likewise.
(vle_opcodes): Add LSP opcodes.
* ppc-dis.c (ppc_mopt): Add PPC_OPCODE_LSP flag to "vle" entry.
gas/
* testsuite/gas/ppc/lsp-checks.d,
* testsuite/gas/ppc/lsp-checks.l,
* testsuite/gas/ppc/lsp-checks.s: New test.
* testsuite/gas/ppc/lsp.d,
* testsuite/gas/ppc/lsp.s: New test.
* testsuite/gas/ppc/ppc.exp: Run new tests.
2017-08-21 23:29:13 +09:30
c03dc33b60
Reorder PPC_OPCODE_* and set PPC_OPCODE_TMR for e6500
...
PPC_OPCODE_* renumbered to fill the gaps left by previous patches,
and reordered chronologically just because. I kept PPC_OPCODE_TMR
because presumably it might be used in future APUinfo for e6500.
include/
* opcode/ppc.h (PPC_OPCODE_*): Renumber and order chronologically.
(PPC_OPCODE_SPE): Comment on this and other bits used for APUinfo.
opcodes/
* ppc-dis.c (ppc_opts): Formatting. Set PPC_OPCODE_TMR for e6500.
* ppc-opc.c (powerpc_opcodes <mftmr, mttmr>): Remove now
unnecessary E6500.
2017-04-11 07:43:21 +09:30
ef85eab0ec
Bye bye PPC_OPCODE_HTM and -mhtm
...
The -mhtm option is fairly useless too.
include/
* opcode/ppc.h (PPC_OPCODE_HTM): Delete.
gas/
* config/tc-ppc.c (md_show_usage): Delete mention of -mhtm.
* testsuite/gas/ppc/htm.d: Pass -mpower8 and -Mpower8.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_HTM and "htm".
* ppc-opc.c (PPCHTM): Define as PPC_OPCODE_POWER8.
2017-04-11 07:40:24 +09:30
9570835e55
Bye Bye PPC_OPCODE_VSX3
...
This bit is also useless as it can be replaced with PPC_OPCODE_POWER9.
Defining the VSX2 and VSX3 selection based on cpu bits also lets the
assembler/disassembler distinguish between the power7 VSX opcodes and
the power8 ones. Note that this change means -mvsx now reverts back
to just adding the power7 VSX insns.
include/
* opcode/ppc.h (PPC_OPCODE_VSX3): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_VSX3.
* ppc-opc.c (PPCVSX2): Define as PPC_OPCODE_POWER8.
(PPCVSX3): Define as PPC_OPCODE_POWER9.
2017-04-11 07:36:43 +09:30
9a85b496ac
Bye bye PPC_OPCODE_ALTIVEC2
...
This bit is worse than useless. Using it prevents the assembler and
disassembler distinguishing between opcodes added for power8 and those
added for power9.
include/
* opcode/ppc.h (PPC_OPCODE_ALTIVEC2): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_ALTIVEC2.
* ppc-opc.c (PPCVEC2): Define as PPC_OPCODE_POWER8|PPC_OPCODE_E6500.
(PPCVEC3): Define as PPC_OPCODE_POWER9.
2017-04-11 07:33:50 +09:30
52be03fd13
PowerPC -Mraw disassembly
...
This adds -Mraw for PowerPC objdump, a disassembler option to display
the underlying machine instruction rather than aliases. For example,
"rlwinm" always rather than "rotlwi" when the instruction is
performing a simple rotate.
binutils/
* doc/binutils.texi (objdump): Document PowerPC -M options.
gas/
* config/tc-ppc.c (md_parse_option): Reject -mraw.
include/
* opcode/ppc.h (PPC_OPCODE_RAW): Define.
(PPC_OPCODE_*): Make them all unsigned long long constants.
opcodes/
* ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add
"raw" option.
(lookup_powerpc): Don't special case -1 dialect. Handle
PPC_OPCODE_RAW.
(print_insn_powerpc): Mask out PPC_OPCODE_ANY on first
lookup_powerpc call, pass it on second.
2017-03-29 22:55:18 +10:30
7e0de605cb
PowerPC register expression checks
...
This stops powerpc gas blithely accepting such nonsense as
"addi %f4,%cr3,%r31".
PR 21118
gas/
* NEWS: Mention powerpc register checks.
* config/tc-ppc.c (struct pd_reg): Make value a short. Add flags.
(pre_defined_registers): Delete fpscr and pmr entries. Set
register type in flags.
(cr_names): Set type in flags.
(reg_name_search): Return pointer to struct pd_reg rather than value.
(register_name): Adjust to suit. Set X_md from flags.
(ppc_parse_name): Likewise.
(ppc_optimize_expr): New function.
(md_assemble): Verify expresion reg flags match operand.
* config/tc-ppc.h (md_optimize_expr): Define.
(ppc_optimize_expr): Declare.
include/
* opcode/ppc.h (PPC_OPERAND_*): Reassign values, regs first.
(PPC_OPERAND_SPR, PPC_OPERAND_GQR): Define.
opcodes/
* ppc-opc.c (powerpc_operands): Flag SPR, SPRG and TBR entries
with PPC_OPERAND_SPR. Flag PSQ and PSQM with PPC_OPERAND_GQR.
2017-02-14 21:12:07 +10:30
2571583aed
Update year range in copyright notice of all files.
2017-01-02 14:08:56 +10:30
08dc996fed
PR20744, Incorrect PowerPC VLE relocs
...
VLE 16A and 16D relocs were functionally swapped.
PR 20744
include/
* opcode/ppc.h: Define VLE insns using 16A and 16D relocs.
bfd/
* elf32-ppc.h (struct ppc_elf_params): Add vle_reloc_fixup field.
* elf32-ppc.c: Include opcode/ppc.h.
(ppc_elf_howto_raw): Correct dst_mask for R_PPC_VLE_LO16A,
R_PPC_VLE_LO16D, R_PPC_VLE_HI16A, R_PPC_VLE_HI16D, R_PPC_VLE_HA16A,
R_PPC_VLE_HA16D, R_PPC_VLE_SDAREL_LO16A, R_PPC_VLE_SDAREL_LO16D,
R_PPC_VLE_SDAREL_HI16A, R_PPC_VLE_SDAREL_HI16D,
R_PPC_VLE_SDAREL_HA16A, and R_PPC_VLE_SDAREL_HA16D relocs.
(ppc_elf_link_hash_table_create): Update default_params init.
(ppc_elf_vle_split16): Correct shift and mask. Add params.
Report or fix insn/reloc mismatches.
(ppc_elf_relocate_section): Pass input_section, offset and fixup
to ppc_elf_vle_split16.
binutils/
* NEWS: Mention PowerPC VLE relocation error.
gas/
* config/tc-ppc.c: Delete VLE insn defines.
(md_assemble): Swap use_a_reloc and use_d_reloc.
* testsuite/gas/ppc/vle-reloc.d: Update.
ld/
* emultempl/ppc32elf.em (params): Update initializer. Handle
--vle-reloc-fixup command line arg.
2016-11-22 20:19:29 +10:30
a5721ba270
Disallow 3-operand cmp[l][i] for ppc64
...
cmp[l][o] get an optional L field only when generating 32-bit code.
dcbf, tlbie and tlbiel keep their optional L field, ditto for R field
of tbegin. cmprb, tsr., wlcr[all] and mtsle all change to a
compulsory L field.
L field of dcbf and wclr is 2 bits.
PR 20641
include/
* opcode/ppc.h (PPC_OPERAND_OPTIONAL32): Define.
opcodes/
* ppc-opc.c (L): Make compulsory.
(LOPT): New, optional form of L.
(HTM_R): Define as LOPT.
(L0, L1): Delete.
(L32OPT): New, optional for 32-bit L.
(L2OPT): New, 2-bit L for dcbf.
(SVC_LEC): Update.
(L2): Define.
(insert_l0, extract_l0, insert_l1, extract_l2): Delete.
(powerpc_opcodes <cmpli, cmpi, cmpl, cmp>): Use L32OPT.
<dcbf>: Use L2OPT.
<tlbiel, tlbie>: Use LOPT.
<wclr, wclrall>: Use L2.
gas/
* config/tc-ppc.c (md_assemble): Handle PPC_OPERAND_OPTIONAL32.
* testsuite/gas/ppc/power8.s: Provide tbegin. operand.
* testsuite/gas/ppc/power9.d: Update cmprb disassembly.
2016-09-29 15:12:47 +09:30
dfdaec14b0
Fix some PowerPC VLE BFD issues and add some PowerPC VLE instructions.
...
bfd/
* elf32-ppc.c (is_branch_reloc): Recognise VLE branch relocations.
(ppc_elf_howto_raw): Fix dst_mask of R_PPC_VLE_REL15.
(ppc_elf_vle_split16): Clear field before inserting.
opcodes/
* ppc-opc.c (vle_opcodes): Alias 'e_cmpwi' to 'e_cmpi' and
'e_cmplwi' to 'e_cmpli' instead.
(OPVUPRT, OPVUPRT_MASK): Define.
(powerpc_opcodes): Add E200Z4 insns.
(vle_opcodes): Add context save/restore insns.
include/
* opcode/ppc.h (PPC_OPCODE_E200Z4): New define.
2016-08-01 09:42:31 -07:00
1fe0971e41
add more extern C
...
opcodes/ChangeLog:
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* nds32-asm.h: Add extern "C".
* sh-opc.h: Likewise.
bfd/ChangeLog:
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* elf32-hppa.h: Add extern "C".
* elf32-nds32.h: Likewise.
* elf32-tic6x.h: Likewise.
include/ChangeLog:
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* elf/mips.h: Likewise.
* elf/sh.h: Likewise.
* opcode/d10v.h: Likewise.
* opcode/d30v.h: Likewise.
* opcode/ia64.h: Likewise.
* opcode/mips.h: Likewise.
* opcode/ppc.h: Likewise.
* opcode/sparc.h: Likewise.
* opcode/tic6x.h: Likewise.
* opcode/v850.h: Likewise.
2016-06-01 21:26:32 -04:00
6f2750feaf
Copyright update for binutils
2016-01-01 23:00:01 +10:30
a680de9a98
Add assembler, disassembler and linker support for power9.
...
include/opcode/
* ppc.h (PPC_OPCODE_POWER9): New define.
(PPC_OPCODE_VSX3): Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power9" and "pwr9" entries.
Add PPC_OPCODE_VSX3 to the vsx entry.
(powerpc_init_dialect): Set default dialect to power9.
* ppc-opc.c (insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd,
insert_dxdn, extract_dxdn, insert_l0, extract_l0, insert_l1,
extract_l1 insert_xtq6, extract_xtq6): New static functions.
(insert_esync): Test for illegal L operand value.
(DCMX, DCMXS, DXD, NDXD, L0, L1, RC, FC, UIM6, X_R, RIC, PRS, XSQ6,
XTQ6, LRAND, IMM8, DQX, DQX_MASK, DX, DX_MASK, VXVAPS_MASK, VXVA,XVA,
XX2VA, XVARC, XBF_MASK, XX2UIM4_MASK, XX2BFD_MASK, XX2DCMXS_MASK,
XVA_MASK, XRLA_MASK, XBFRARB_MASK, XLRAND_MASK, POWER9, PPCVEC3,
PPCVSX3): New defines.
(powerpc_opcodes) <ps_cmpu0, ps_cmpo0, ps_cmpu1, ps_cmpo1, fcmpu,
fcmpo, ftdiv, ftsqrt>: Use XBF_MASK.
<mcrxr>: Use XBFRARB_MASK.
<addpcis, bcdcfn., bcdcfsq., bcdcfz., bcdcpsgn., bcdctn., bcdctsq.,
bcdctz., bcds., bcdsetsgn., bcdsr., bcdtrunc., bcdus., bcdutrunc.,
cmpeqb, cmprb, cnttzd, cnttzd., cnttzw, cnttzw., copy, copy_first,
cp_abort, darn, dtstsfi, dtstsfiq, extswsli, extswsli., ldat, ldmx,
lwat, lxsd, lxsibzx, lxsihzx, lxssp, lxv, lxvb16x, lxvh8x, lxvl, lxvll,
lxvwsx, lxvx, maddhd, maddhdu, maddld, mcrxrx, mfvsrld, modsd, modsw,
modud, moduw, msgsync, mtvsrdd, mtvsrws, paste, paste., paste_last,
rmieg, setb, slbieg, slbsync, stdat, stop, stwat, stxsd, stxsibx,
stxsihx, stxssp, stxv, stxvb16x, stxvh8x, stxvl, stxvll, stxvx,
subpcis, urfid, vbpermd, vclzlsbb, vcmpneb, vcmpneb., vcmpneh,
vcmpneh., vcmpnew, vcmpnew., vcmpnezb, vcmpnezb., vcmpnezh, vcmpnezh.,
vcmpnezw, vcmpnezw., vctzb, vctzd, vctzh, vctzlsbb, vctzw, vextractd,
vextractub, vextractuh, vextractuw, vextsb2d, vextsb2w, vextsh2d,
vextsh2w, vextsw2d, vextublx, vextubrx, vextuhlx, vextuhrx, vextuwlx,
vextuwrx, vinsertb, vinsertd, vinserth, vinsertw, vmul10cuq,
vmul10ecuq, vmul10euq, vmul10uq, vnegd, vnegw, vpermr, vprtybd,
vprtybq, vprtybw, vrldmi, vrldnm, vrlwmi, vrlwnm, vslv, vsrv, wait,
xsabsqp, xsaddqp, xsaddqpo, xscmpeqdp, xscmpexpdp, xscmpexpqp,
xscmpgedp, xscmpgtdp, xscmpnedp, xscmpoqp, xscmpuqp, xscpsgnqp,
xscvdphp, xscvdpqp, xscvhpdp, xscvqpdp, xscvqpdpo, xscvqpsdz,
xscvqpswz, xscvqpudz, xscvqpuwz, xscvsdqp, xscvudqp, xsdivqp,
xsdivqpo, xsiexpdp, xsiexpqp, xsmaddqp, xsmaddqpo, xsmaxcdp,
xsmaxjdp, xsmincdp, xsminjdp, xsmsubqp, xsmsubqpo, xsmulqp, xsmulqpo,
xsnabsqp, xsnegqp, xsnmaddqp, xsnmaddqpo, xsnmsubqp, xsnmsubqpo,
xsrqpi, xsrqpix, xsrqpxp, xssqrtqp, xssqrtqpo, xssubqp, xssubqpo,
xststdcdp, xststdcqp, xststdcsp, xsxexpdp, xsxexpqp, xsxsigdp,
xsxsigqp, xvcmpnedp, xvcmpnedp., xvcmpnesp, xvcmpnesp., xvcvhpsp,
xvcvsphp, xviexpdp, xviexpsp, xvtstdcdp, xvtstdcsp, xvxexpdp,
xvxexpsp, xvxsigdp, xvxsigsp, xxbrd, xxbrh, xxbrq, xxbrw, xxextractuw,
xxinsertw, xxperm, xxpermr, xxspltib>: New instructions.
<doze, nap, sleep, rvwinkle, waitasec, lxvx, stxvx>: Disable on POWER9.
<tlbiel, tlbie, sync, slbmfev, slbmfee>: Add additional operands.
include/elf/
* ppc.h (R_PPC_REL16DX_HA): New reloction.
* ppc64.h (R_PPC64_REL16DX_HA): Likewise.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Add R_PPC_REL16DX_HA.
(ppc_elf_reloc_type_lookup): Handle R_PPC_REL16DX_HA.
(ppc_elf_addr16_ha_reloc): Likewise.
(ppc_elf_check_relocs): Likewise.
(ppc_elf_relocate_section): Likewise.
(is_insn_dq_form): Handle lxv and stxv instructions.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_REL16DX_HA.
(ppc64_elf_reloc_type_lookup): Handle R_PPC64_REL16DX_HA.
(ppc64_elf_ha_reloc): Likewise.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
* reloc.c (BFD_RELOC_PPC_REL16DX_HA): New.
elfcpp/
* powerpc.h (R_POWERPC_REL16DX_HA): Define.
gas/
* doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* config/tc-ppc.c (md_show_usage): Likewise.
(md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA.
(md_apply_fix): Likewise.
(ppc_handle_align): Handle power9's group ending nop.
gas/testsuite/
* gas/ppc/altivec3.s: New test.
* gas/ppc/altivec3.d: Likewise.
* gas/ppc/vsx3.s: Likewise.
* gas/ppc/vsx3.d: Likewise.
* gas/ppc/power9.s: Likewise.
* gas/ppc/power9.d: Likewise.
* gas/ppc/ppc.exp: Run them.
* gas/ppc/power8.s <lxvx, lxvd2x, stxvx, stxvd2x>: Add new tests.
* gas/ppc/power8.d: Likewise.
* gas/ppc/vsx.s: <lxvx, stxvx>: Rename invalid mnemonics ...
<lxvd2x, stxvd2x>: ...to this.
* gas/ppc/vsx.d: Likewise.
gold/
* gold/powerpc.cc (Powerpc_relocate_functions::addr16_dq): New function.
(Powerpc_relocate_functions::addr16dx_ha): Likewise.
(Target_powerpc::Scan::local): Handle R_POWERPC_REL16DX_HA.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
ld/testsuite/
* ld-powerpc/addpcis.d: New test.
* ld-powerpc/addpcis.s: New test.
* ld-powerpc/powerpc.exp: Run it.
2015-11-11 19:52:52 -06:00
b6518b3871
Fix compile time warnings generated when compiling with clang.
...
bfd * bout.c (b_out_slurp_reloc_table): Cast constant to unsigned in
order to avoid problems with left shifting negative values.
(abs32code): Likewise.
* mach-o.c (FILE_ALIGN): Likewise.
* coff-rs6000.c (xcoff_debug_sections): Delete unused static
array.
* elf32-visium.c (visium_reloc_map): Likewise.
* elf32-arm.c (elf32_arm_final_link_relocate): Remove useless
calls to abs function.
* elf32-frv.c (_frvfdpic_relax_tls_entries): Likewise.
* elf32-score.c (score_elf_final_link_relocate): Likewise.
* elf32-score7.c (score_elf_final_link_relocate): Likewise.
* elf32-i860.c (i860_howto_pc26_reloc): Use multiplication instead
of shifting to create a negative mask.
* elf32-msp430.c (elf_backend_special_sections): Define.
* elfxx-mips.c (got_ofst_reloc_p): Delete unused function.
(got_hi16_reloc_p): Delete unused function.
* ppcboot.c (ppcboot_bfd_print_private_bfd_data): Fix test of
partition name.
gas * config/tc-ppc.c (insn_validate): Cast PPC_OPSHIFT_INV to an int.
opcode * ppc.h (PPC_OPSHIFT_INV): Use an unsigned constant when left
shifting.
ld * emultempl/elf32.em (ehdr_start_empty): New static variable.
(before_allocation): Use it to initialise ehdr_start_save.
* emultempl/pe.em (write_build_id): Remove useless double
parenthesis.
* emultempl/pep.em (write_build_id): Likewise.
opcodes * bfin-dis.c (fmtconst): Remove unnecessary call to the abs
function.
* tic30-dis.c (print_branch): Likewise.
* cgen-asm.c (cgen_parse_signed_integer): Cast integer to signed
value before left shifting.
* fr30-ibld.c (fr30_cgen_extract_operand): Likewise.
* hppa-dis.c (print_insn_hppa): Likewise.
* mips-dis.c (mips_cp0sel_names_mipsr5900): Delete unused static
array.
* msp430-dis.c (msp430_singleoperand): Likewise.
(msp430_doubleoperand): Likewise.
(print_insn_msp430): Likewise.
* nds32-asm.c (parse_operand): Likewise.
* sh-opc.h (MASK): Likewise.
* v850-dis.c (get_operand_value): Likewise.
2015-09-23 18:05:16 +01:00
ef5a96d564
Remove ppc860, ppc750cl, ppc7450 insns from common ppc.
...
Back in the day support for these processors was added, we probably
didn't want to waste PPC_OPCODE bits on minor variations. I've had a
complaint that disassembly of mfspr/mtspr was wrong for power8. This
patch fixes that problem.
Note that since -m860/-m850/-m821 are new gas options enabling the
mpc8xx specific mfspr/mtspr variants it is possible that this change
will break some mpc8xx assembly code. ie. you might need to modify
makefiles to pass -m860 to gas.
include/opcode/
* ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define.
opcodes/
* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
gas/
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
2015-07-03 10:57:14 +09:30
11a0cf2ec0
Allow for optional operands with non-zero default values.
...
ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand
with the value of either a 0 or 1. It also defines an extended mnemonic
with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1".
I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the
problem is, optional operands that are ommitted always default to the
value 0, which is wrong in this case. I have added support for allowing
non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE
that specifies that the default operand value to be used is stored in the
SHIFT field of the operand field immediately following this one.
This fixes the rfebb issue. I also fixed the mftb and mfcr instructions
so they use the same mechanism. This allows us to flag invalid uses of
mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd].
include/opcode/
* ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New.
(ppc_optional_operand_value): New inline function.
opcodes/
* ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value.
* ppc-opc.c (FXM4): Add non-zero optional value.
(TBR): Likewise.
(SXL): Likewise.
(insert_fxm): Handle new default operand value.
(extract_fxm): Likewise.
(insert_tbr): Likewise.
(extract_tbr): Likewise.
gas/
* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
Allow for optional operands without insert functions.
gas/testsuite/
* gas/ppc/power8.d: Fixup rfebb test results.
* gas/ppc/a2.s: Fix invalid mfcr test.
* gas/ppc/a2.d: Likewise.
2015-06-19 17:17:07 -05:00
b90efa5b79
ChangeLog rotatation and copyright year update
2015-01-02 00:53:45 +10:30
4b95cf5c0c
Update copyright years
2014-03-05 22:16:15 +10:30
5817ffd1f8
include/opcode/
...
* ppc.h (PPC_OPCODE_POWER8): New define.
(PPC_OPCODE_HTM): Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power8", "pwr8" and "htm" entries.
* ppc-opc.c (HTM_R, HTM_SI, XRTRB_MASK, XRTRARB_MASK, XRTLRARB_MASK,
XRTARARB_MASK, XRTBFRARB_MASK, XRCL, POWER8, PPCHTM): New defines.
(SH6): Update.
<"tabort.", "tabortdc.", "tabortdci.", "tabortwc.",
"tabortwci.", "tbegin.", "tcheck", "tend.", "trechkpt.",
"treclaim.", "tsr.">: Add POWER8 HTM opcodes.
<"tendall.", "tresume.", "tsuspend.">: Add POWER8 HTM extended opcodes.
gas/
* doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* config/tc-ppc.c (md_show_usage): Likewise.
(ppc_handle_align): Handle power8's group ending nop.
gas/testsuite/
* gas/ppc/htm.d: New test.
* gas/ppc/htm.s: Likewise.
* gas/ppc/power8.d: Likewise.
* gas/ppc/power8.s: Likewise.
* gas/ppc/ppc.exp: Run them.
2013-01-11 02:25:36 +00:00
776fc41826
include/opcode/
...
* ppc.h (ppc_parse_cpu): Update prototype.
opcodes/
* ppc-dis.c (ppc_parse_cpu): Add "sticky" param. Track bits
set from ppc_opts.sticky in it. Delete "retain_mask".
(powerpc_init_dialect): Choose default dialect from info->mach
before parsing -M options. Handle more bfd_mach_ppc variants.
Update common default to power7.
gas/
* config/tc-ppc.c (sticky): New var.
(md_parse_option, ppc_machine): Update ppc_parse_cpu calls.
gas/testsuite/
* gas/ppc/astest2.d: Pass -Mppc to objdump.
ld/testsuite/
* ld-powerpc/plt1.d: Update for default "at" branch hints.
* ld-powerpc/tlsexe.d: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsopt1.d: Likewise.
* ld-powerpc/tlsopt1_32.d: Likewise.
* ld-powerpc/tlsopt2.d: Likewise.
* ld-powerpc/tlsopt2_32.d: Likewise.
* ld-powerpc/tlsopt4.d: Likewise.
* ld-powerpc/tlsopt4_32.d: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
2012-11-23 03:28:13 +00:00
b9c361e0ad
Add support for PowerPC VLE.
...
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 19:45:30 +00:00
aea77599d0
include/opcode/
...
* ppc.h: Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR.
opcodes/
* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
(PPCVEC2, PPCTMR, E6500): New short names.
(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
optional operands on sync instruction for E6500 target.
bfd/
* archures.c: Add bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entryies for
bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
gas/
* config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
(ppc_handle_align): Add termination nop opcode for e500mc family.
* doc/as.texinfo: Document options -me5500 and -me6500.
* doc/c-ppc.texi: Likewise.
gas/testsuite/
* gas/ppc/e500mc64_nop.s: New test case for e500mc family
termination nops.
* gas/ppc/e500mc64_nop.d: Likewise.
* gas/ppc/e5500_nop.s: Likewise.
* gas/ppc/e5500_nop.d: Likewise.
* gas/ppc/e6500_nop.s: Likewise.
* gas/ppc/e6500_nop.d: Likewise.
* gas/ppc/e6500.s: New.
* gas/ppc/e6500.d: Likewise.
* gas/ppc/ppc.exp: Run e6500, e500mc64_nop, e5500_nop, and e6500_nop.
2012-03-09 23:39:06 +00:00
bdc70b4a03
include/opcode/
...
* ppc.h (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC): Delete.
Renumber other PPC_OPCODE defines.
gas/
* config/tc-ppc.c (ppc_set_cpu): Remove old opcode flags.
(ppc_setup_opcodes): Likewise. Simplify opcode selection.
opcodes/
* ppc-dis.c (ppc_opts, powerpc_init_dialect): Remove old opcode flags.
* ppc-opc.c (PPC32, POWER32, COM32, CLASSIC): Delete.
(PPC64, MFDEC2): Update.
(NON32, NO371): Define.
(powerpc_opcode): Update to not use old opcode flags, and avoid
-m601 duplicates.
2010-07-03 06:51:56 +00:00
f2bae120dc
* ppc.h (PPC_OPCODE_COMMON): Expand comment.
2010-07-03 03:32:50 +00:00
e01d869a3b
gas/
...
* config/tc-ppc.c (md_assemble): Emit APUinfo section for
PPC_OPCODE_E500.
gas/testsuite/
* gas/ppc/e500.s: Add eieio, mbar and lwsync
* gas/ppc/e500.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_E500): Define.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_E500MC from e500 and
e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
* ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
touch floating point regs and are enabled by COM, PPC or PPCCOM.
Treat sync as msync on e500. Treat eieio as mbar 1 on e500.
Treat lwsync as msync on e500.
2010-06-14 14:48:05 +00:00
e4e42b45d5
Upgrade header files to use GPLv3
2010-04-15 10:26:09 +00:00
ce3d2015b2
include/
...
* opcode/ppc.h (PPC_OPCODE_TITAN): Define.
bfd/
* archures.c (bfd_mach_ppc_titan): Define.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add titan entry.
opcodes/
* ppc-dis.c (ppc_opts): Add titan entry.
* ppc-opc.c (TITAN, MULHW): Define.
(powerpc_opcodes): Support AppliedMicro Titan core (APM83xxx).
gas/
* config/tc-ppc.c (md_show_usage): Mention -mtitan. Don't use tabs.
(ppc_mach): Handle titan.
* doc/c-ppc.texi: Mention -mtitan.
gas/testsuite/
* gas/ppc/titan.d, * gas/ppc/titan.s: New test.
* gas/ppc/ppc.exp: Run it.
2010-02-08 01:59:38 +00:00
9fe54b1ca1
gas/
...
* config/tc-ppc.c (md_show_usage): Document -m476.
* doc/c-ppc.texi (PowerPC-Opts): Document -m476.
gas/testsuite/
* gas/ppc/476.s: New test.
* gas/ppc/476.d: Likewise.
* gas/ppc/ppc.exp: Run the 476 test.
include/opcode/
* ppc.h (PPC_OPCODE_476): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "476" entry.
* ppc-opc.c (PPC476): Define.
(powerpc_opcodes): Update mnemonics where required for 476.
2009-10-02 14:42:42 +00:00
634b50f2a6
gas/
...
* config/tc-ppc.c (md_show_usage): Rename "ppca2" to "a2".
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/a2.d: Rename "ppca2" to "a2".
include/opcode/
* ppc.h (PPC_OPCODE_A2): Rename from PPC_OPCODE_PPCA2.
opcodes/
* ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
* ppc-dis.c (ppc_opts): Likewise.
Rename "ppca2" to "a2".
2009-10-01 19:24:48 +00:00
b961e85b6e
o * ppc.h (ppc_cpu_t): Typedef to uint64_t.
2009-09-22 02:36:26 +00:00
e0d602ecff
gas/
...
* config/tc-ppc.c (md_show_usage): Document -mpcca2.
* doc/c-ppc.texi (PowerPC-Opts): Document -mppca2.
gas/testsuite/
* gas/ppc/a2.s: New.
* gas/ppc/a2.d: Likewise.
* gas/ppc/ppc.exp: Run the a2 dump test.
include/opcode/
* ppc.h (PPC_OPCODE_PPCA2): New.
opcodes/
* ppc-dis.c (ppc_opts): Add "ppca2" entry.
* ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
ici mnemonics.
(ERAT_T): New operand.
(XWC_MASK): New mask.
(XOPL2): New macro.
(PPCA2): Define.
2009-09-21 10:29:07 +00:00
69fe9ce501
include/opcode/
...
* ppc.h (ppc_parse_cpu): Declare.
opcodes/
* ppc-dis.c: Include "opintl.h".
(struct ppc_mopt, ppc_opts): New.
(ppc_parse_cpu): New function.
(powerpc_init_dialect): Use it.
(print_ppc_disassembler_options): Dump options from ppc_opts.
Internationalize message.
gas/
* config/tc-ppc.c (parse_cpu): Delete.
(md_parse_option, ppc_machine): Use ppc_parse_cpu.
gas/testsuite/
* gas/ppc/altivec_and_spe.d (objdump): Add -Maltivec.
* gas/ppc/common.d: Adjust for -Mcom not including -Mppc.
2009-03-10 06:53:46 +00:00
066be9f7bd
gas/
...
* config/tc-ppc.c (pre_defined_registers): Add "f32" to "f63",
"f.32" to "f.63", "vs0" to "vs63" and "vs.0" to "vs.63".
(parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
gas/testsuite/
* gas/ppc/e500mc.d ("wait", "waitsrv", "waitimpl"): Add tests.
* gas/ppc/e500mc.s: Likewise.
* gas/ppc/power6.d ("cdtbcd", "cbcdtd", "addg6s"): Add tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d ("lfdpx", "mffgpr", "mftgpr"): Remove invalid tests.
("wait", "waitsrv", "waitimpl", "divwe", "divwe.", "divweo", "divweo.",
"divweu", "divweu.", "divweuo", "divweuo.", "bpermd", "popcntw",
"popcntd", "ldbrx", "stdbrx", "lfiwzx", "lfiwzx", "fcfids", "fcfids.",
"fcfidus", "fcfidus.", "fctiwu", "fctiwu.", "fctiwuz", "fctiwuz.",
"fctidu", "fctidu.", "fctiduz", "fctiduz.", "fcfidu", "fcfidu.",
"ftdiv", "ftdiv", "ftsqrt", "ftsqrt", "dcbtt", "dcbtstt", "dcffix",
"dcffix.", "lbarx", "lbarx", "lbarx", "lharx", "lharx", "lharx",
"stbcx.", "sthcx.", "fre", "fre.", "fres", "fres.", "frsqrte",
"frsqrte.", "frsqrtes", "frsqrtes.", "isel"): Add tests.
* gas/ppc/power7.s: Likewise.
* gas/ppc/vsx.d: New test.
* gas/ppc/vsx.s: Likewise.
* gas/ppc/ppc.exp: Run it.
include/opcode/
* ppc.h (PPC_OPCODE_POWER7): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
the power7 and the isel instructions.
* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
(insert_dm, extract_dm): Likewise.
(XB6): Update comment to include XX2 form.
(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
(RemoveXX3DM): Delete.
(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
"mftgpr">: Deprecate for POWER7.
<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
"frsqrte.">: Deprecate the three operand form and enable the two
operand form for POWER7 and later.
<"wait">: Extend to accept optional parameter. Enable for POWER7.
<"waitsrv", "waitimpl">: Add extended opcodes.
<"ldbrx", "stdbrx">: Enable for POWER7.
<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
"xxspltw", "xxswapd">: Add VSX opcodes.
2009-02-26 22:07:33 +00:00
1cb0a76746
gas/
...
* config/tc-ppc.c (ppc_setup_opcodes): Remove PPC_OPCODE_NOPOWER4 test.
Test the new "deprecated" opcode field.
include/opcode/
* ppc.h (struct powerpc_opcode): New field "deprecated".
(PPC_OPCODE_NOPOWER4): Delete.
opcodes/
* ppc-opc.c (PPCNONE): Define.
(NOPOWER4): Delete.
(powerpc_opcodes): Initialize the new "deprecated" field.
2009-01-09 18:50:58 +00:00
9b4e57660d
gas/
...
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
Handle -mvsx and -mpower7.
(md_show_usage): Document -mpower7 and -mvsx.
* doc/as.texinfo (Target PowerPC): Document -mvsx.
* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
gas/testsuite/
* gas/ppc/power7.d: New.
* gas/ppc/power7.s: Likewise.
* gas/ppc/ppc.exp: Run power7 test.
include/opcode/
* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
* ppc-opc.c (insert_xt6): New static function.
(extract_xt6): Likewise.
(insert_xa6): Likewise.
(extract_xa6: Likewise.
(insert_xb6): Likewise.
(extract_xb6): Likewise.
(insert_xb6s): Likewise.
(extract_xb6s): Likewise.
(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
XX3DM_MASK, PPCVSX): New.
(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
2008-08-02 04:38:51 +00:00
081ba1b3c0
include/opcode/
...
* ppc.h (PPC_OPCODE_405): Define.
(PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI): Define.
gas/
* config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
(md_show_usage): Likewise.
opcodes/
* ppc-dis.c (print_insn_powerpc): Disassemble FSL/FCR/UDI fields.
* ppc-opc.c (powerpc_operands): Add Xilinx APU related operands.
(insert_sprg, PPC405): Use PPC_OPCODE_405.
(powerpc_opcodes): Add Xilinx APU related opcodes.
2008-07-30 06:29:22 +00:00
fa452fa683
include/opcode/
...
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
2008-06-13 20:16:00 +00:00
