mirror of
https://github.com/espressif/ESP8266_RTOS_SDK.git
synced 2025-05-24 10:38:01 +08:00
34 lines
1.5 KiB
Markdown
34 lines
1.5 KiB
Markdown
1. Run `./gencrt.sh` or if you have your own certifications, move them to the main directory, the name is ca.pem, server.pem, server.key, client.pem and client.key.
|
|
|
|
The server.pem and client.pem was generated by the same ca.pem in gencrt.sh.
|
|
|
|
Server side needs ca.pem(to verify client.pem), server.pem, server.key
|
|
|
|
Client side needs ca.pem(to verify server.pem), client.pem, client.key
|
|
|
|
If you have two ca.pem to generate server.pem and client.pem respectively, client1.pem is generate by ca1.pem and client1.key, server2.pem is generate by ca2.pem and server2.key:
|
|
|
|
Client side needs ca2.pem, client1.pem, client1.key.
|
|
|
|
Server side needs ca1.pem, server2.pem, server2.key.
|
|
|
|
Rename ca2.pem client1.pem client1.key to ca.pem client.pem client.key.
|
|
|
|
Use ca1.pem in openssl s_server -CAfile option.
|
|
|
|
2. Run `openssl s_server -CAfile ca.pem -cert server.pem -key server.key -verify 1 -tls1_2 -accept 443` in ./main directory to start server on your PC and wait for ESP8266 client to connect it.
|
|
|
|
3. Compile and download
|
|
- run `make menuconfig`
|
|
- Modify SSID and PASSWORD under menu "Example Configuration".
|
|
Make sure that the computer and ESP8266 are in the same local area network.
|
|
- Modify TARGET_NAME and TARGET_PORT under menu "Example Configuration".
|
|
- run `make flash monitor`
|
|
|
|
**ATTENTION**
|
|
|
|
**1. Make sure the free heap size larger than 30K.**
|
|
|
|
**2. Make sure the private key length larger than 2048.**
|
|
|
|
**3. Make sure the fragment size range is between 2048 and 16384.** |