initial commit

samples/tapi/squares.cpp

@@ -0,0 +1,200 @@
+
+#include "opencv2/core.hpp"
+#include "opencv2/core/ocl.hpp"
+#include "opencv2/core/utility.hpp"
+#include "opencv2/imgproc.hpp"
+#include "opencv2/imgcodecs.hpp"
+#include "opencv2/highgui.hpp"
+#include <iostream>
+
+using namespace cv;
+using namespace std;
+
+int thresh = 50, N = 11;
+const char* wndname = "Square Detection Demo";
+
+// helper function:
+// finds a cosine of angle between vectors
+// from pt0->pt1 and from pt0->pt2
+static double angle( Point pt1, Point pt2, Point pt0 )
+{
+    double dx1 = pt1.x - pt0.x;
+    double dy1 = pt1.y - pt0.y;
+    double dx2 = pt2.x - pt0.x;
+    double dy2 = pt2.y - pt0.y;
+    return (dx1*dx2 + dy1*dy2)/sqrt((dx1*dx1 + dy1*dy1)*(dx2*dx2 + dy2*dy2) + 1e-10);
+}
+
+
+// returns sequence of squares detected on the image.
+static void findSquares( const UMat& image, vector<vector<Point> >& squares )
+{
+    squares.clear();
+    UMat pyr, timg, gray0(image.size(), CV_8U), gray;
+
+    // down-scale and upscale the image to filter out the noise
+    pyrDown(image, pyr, Size(image.cols/2, image.rows/2));
+    pyrUp(pyr, timg, image.size());
+    vector<vector<Point> > contours;
+
+    // find squares in every color plane of the image
+    for( int c = 0; c < 3; c++ )
+    {
+        int ch[] = {c, 0};
+        mixChannels(timg, gray0, ch, 1);
+
+        // try several threshold levels
+        for( int l = 0; l < N; l++ )
+        {
+            // hack: use Canny instead of zero threshold level.
+            // Canny helps to catch squares with gradient shading
+            if( l == 0 )
+            {
+                // apply Canny. Take the upper threshold from slider
+                // and set the lower to 0 (which forces edges merging)
+                Canny(gray0, gray, 0, thresh, 5);
+                // dilate canny output to remove potential
+                // holes between edge segments
+                dilate(gray, gray, UMat(), Point(-1,-1));
+            }
+            else
+            {
+                // apply threshold if l!=0:
+                //     tgray(x,y) = gray(x,y) < (l+1)*255/N ? 255 : 0
+                threshold(gray0, gray, (l+1)*255/N, 255, THRESH_BINARY);
+            }
+
+            // find contours and store them all as a list
+            findContours(gray, contours, RETR_LIST, CHAIN_APPROX_SIMPLE);
+
+            vector<Point> approx;
+
+            // test each contour
+            for( size_t i = 0; i < contours.size(); i++ )
+            {
+                // approximate contour with accuracy proportional
+                // to the contour perimeter
+
+                approxPolyDP(contours[i], approx, arcLength(contours[i], true)*0.02, true);
+
+                // square contours should have 4 vertices after approximation
+                // relatively large area (to filter out noisy contours)
+                // and be convex.
+                // Note: absolute value of an area is used because
+                // area may be positive or negative - in accordance with the
+                // contour orientation
+                if( approx.size() == 4 &&
+                        fabs(contourArea(approx)) > 1000 &&
+                        isContourConvex(approx) )
+                {
+                    double maxCosine = 0;
+
+                    for( int j = 2; j < 5; j++ )
+                    {
+                        // find the maximum cosine of the angle between joint edges
+                        double cosine = fabs(angle(approx[j%4], approx[j-2], approx[j-1]));
+                        maxCosine = MAX(maxCosine, cosine);
+                    }
+
+                    // if cosines of all angles are small
+                    // (all angles are ~90 degree) then write quandrange
+                    // vertices to resultant sequence
+                    if( maxCosine < 0.3 )
+                        squares.push_back(approx);
+                }
+            }
+        }
+    }
+}
+
+// the function draws all the squares in the image
+static void drawSquares( UMat& _image, const vector<vector<Point> >& squares )
+{
+    Mat image = _image.getMat(ACCESS_WRITE);
+    for( size_t i = 0; i < squares.size(); i++ )
+    {
+        const Point* p = &squares[i][0];
+        int n = (int)squares[i].size();
+        polylines(image, &p, &n, 1, true, Scalar(0,255,0), 3, LINE_AA);
+    }
+}
+
+
+// draw both pure-C++ and ocl square results onto a single image
+static UMat drawSquaresBoth( const UMat& image,
+                            const vector<vector<Point> >& sqs)
+{
+    UMat imgToShow(Size(image.cols, image.rows), image.type());
+    image.copyTo(imgToShow);
+
+    drawSquares(imgToShow, sqs);
+
+    return imgToShow;
+}
+
+
+int main(int argc, char** argv)
+{
+    const char* keys =
+        "{ i input    | ../data/pic1.png   | specify input image }"
+        "{ o output   | squares_output.jpg | specify output save path}"
+        "{ h help     |                    | print help message }"
+        "{ m cpu_mode |                    | run without OpenCL }";
+
+    CommandLineParser cmd(argc, argv, keys);
+
+    if(cmd.has("help"))
+    {
+        cout << "Usage : " << argv[0] << " [options]" << endl;
+        cout << "Available options:" << endl;
+        cmd.printMessage();
+        return EXIT_SUCCESS;
+    }
+    if (cmd.has("cpu_mode"))
+    {
+        ocl::setUseOpenCL(false);
+        cout << "OpenCL was disabled" << endl;
+    }
+
+    string inputName = samples::findFile(cmd.get<string>("i"));
+    string outfile = cmd.get<string>("o");
+
+    int iterations = 10;
+    namedWindow( wndname, WINDOW_AUTOSIZE );
+    vector<vector<Point> > squares;
+
+    UMat image;
+    imread(inputName, IMREAD_COLOR).copyTo(image);
+    if( image.empty() )
+    {
+        cout << "Couldn't load " << inputName << endl;
+        cmd.printMessage();
+        return EXIT_FAILURE;
+    }
+
+    int j = iterations;
+    int64 t_cpp = 0;
+    //warm-ups
+    cout << "warming up ..." << endl;
+    findSquares(image, squares);
+
+    do
+    {
+        int64 t_start = getTickCount();
+        findSquares(image, squares);
+        t_cpp += cv::getTickCount() - t_start;
+
+        t_start  = getTickCount();
+
+        cout << "run loop: " << j << endl;
+    }
+    while(--j);
+    cout << "average time: " << 1000.0f * (double)t_cpp / getTickFrequency() / iterations << "ms" << endl;
+
+    UMat result = drawSquaresBoth(image, squares);
+    imshow(wndname, result);
+    imwrite(outfile, result);
+    waitKey(0);
+
+    return EXIT_SUCCESS;
+}