Files
podman/test/e2e/events_test.go
Ed Santiago 547fff2703 e2e tests: use Should(Exit()) and ExitWithError()
e2e test failures are rife with messages like:

   Expected 1 to equal 0

These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.

Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.

THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:

   cd test/e2e
   ! positive assertions. The second is the same as the first,
   ! with the addition of (unnecessary) parentheses because
   ! some invocations were written that way. The third is BeZero().
   perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
   perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
   perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go

   ! Same as above, but handles three non-numeric exit codes
   ! in run_exit_test.go
   perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go

   ! negative assertions. Difference is the spelling of 'To(Not)',
   ! 'ToNot', and 'NotTo'. I assume those are all the same.
   perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
   perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
   perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
   ! negative, old use of BeZero()
   perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go

Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.

UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:

   perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))

UPDATE 2: hand-edit run_volume_test.go

UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places

UPDATE 4: skip a test due to bug #10935 (race condition)

Signed-off-by: Ed Santiago <santiago@redhat.com>
2021-07-15 05:06:33 -06:00

190 lines
6.0 KiB
Go

package integration
import (
"encoding/json"
"fmt"
"os"
"strings"
"sync"
"time"
"github.com/containers/podman/v3/libpod/events"
. "github.com/containers/podman/v3/test/utils"
"github.com/containers/storage/pkg/stringid"
. "github.com/onsi/ginkgo"
. "github.com/onsi/gomega"
. "github.com/onsi/gomega/gexec"
)
var _ = Describe("Podman events", func() {
var (
tempdir string
podmanTest *PodmanTestIntegration
)
BeforeEach(func() {
var err error
tempdir, err = CreateTempDirInTempDir()
if err != nil {
os.Exit(1)
}
podmanTest = PodmanTestCreate(tempdir)
podmanTest.Setup()
podmanTest.SeedImages()
})
AfterEach(func() {
podmanTest.Cleanup()
f := CurrentGinkgoTestDescription()
processTestResult(f)
})
// For most, all, of these tests we do not "live" test following a log because it may make a fragile test
// system more complex. Instead we run the "events" and then verify that the events are processed correctly.
// Perhaps a future version of this test would put events in a go func and send output back over a channel
// while events occur.
// These tests are only known to work on Fedora ATM. Other distributions
// will be skipped.
It("podman events", func() {
SkipIfNotFedora()
_, ec, _ := podmanTest.RunLsContainer("")
Expect(ec).To(Equal(0))
result := podmanTest.Podman([]string{"events", "--stream=false"})
result.WaitWithDefaultTimeout()
Expect(result).Should(Exit(0))
})
It("podman events with an event filter", func() {
SkipIfNotFedora()
_, ec, _ := podmanTest.RunLsContainer("")
Expect(ec).To(Equal(0))
result := podmanTest.Podman([]string{"events", "--stream=false", "--filter", "event=start"})
result.WaitWithDefaultTimeout()
Expect(result).Should(Exit(0))
Expect(len(result.OutputToStringArray()) >= 1)
})
It("podman events with an event filter and container=cid", func() {
Skip("Does not work on v2")
SkipIfNotFedora()
_, ec, cid := podmanTest.RunLsContainer("")
Expect(ec).To(Equal(0))
_, ec2, cid2 := podmanTest.RunLsContainer("")
Expect(ec2).To(Equal(0))
time.Sleep(5 * time.Second)
result := podmanTest.Podman([]string{"events", "--stream=false", "--filter", "event=start", "--filter", fmt.Sprintf("container=%s", cid)})
result.WaitWithDefaultTimeout()
Expect(result).Should(Exit(0))
Expect(len(result.OutputToStringArray())).To(Equal(1))
Expect(!strings.Contains(result.OutputToString(), cid2))
})
It("podman events with a type and filter container=id", func() {
SkipIfNotFedora()
_, ec, cid := podmanTest.RunLsContainer("")
Expect(ec).To(Equal(0))
result := podmanTest.Podman([]string{"events", "--stream=false", "--filter", "type=pod", "--filter", fmt.Sprintf("container=%s", cid)})
result.WaitWithDefaultTimeout()
Expect(result).Should(Exit(0))
Expect(len(result.OutputToStringArray())).To(Equal(0))
})
It("podman events with a type", func() {
SkipIfNotFedora()
setup := podmanTest.Podman([]string{"run", "-dt", "--pod", "new:foobarpod", ALPINE, "top"})
setup.WaitWithDefaultTimeout()
stop := podmanTest.Podman([]string{"pod", "stop", "foobarpod"})
stop.WaitWithDefaultTimeout()
Expect(stop).Should(Exit(0))
Expect(setup).Should(Exit(0))
result := podmanTest.Podman([]string{"events", "--stream=false", "--filter", "type=pod", "--filter", "pod=foobarpod"})
result.WaitWithDefaultTimeout()
Expect(result).Should(Exit(0))
fmt.Println(result.OutputToStringArray())
Expect(len(result.OutputToStringArray()) >= 2)
})
It("podman events --since", func() {
SkipIfNotFedora()
_, ec, _ := podmanTest.RunLsContainer("")
Expect(ec).To(Equal(0))
result := podmanTest.Podman([]string{"events", "--stream=false", "--since", "1m"})
result.WaitWithDefaultTimeout()
Expect(result).Should(Exit(0))
})
It("podman events --until", func() {
SkipIfNotFedora()
_, ec, _ := podmanTest.RunLsContainer("")
Expect(ec).To(Equal(0))
result := podmanTest.Podman([]string{"events", "--stream=false", "--until", "1h"})
result.WaitWithDefaultTimeout()
Expect(result).Should(Exit(0))
})
It("podman events format", func() {
SkipIfNotFedora()
_, ec, _ := podmanTest.RunLsContainer("")
Expect(ec).To(Equal(0))
test := podmanTest.Podman([]string{"events", "--stream=false", "--format", "json"})
test.WaitWithDefaultTimeout()
Expect(test).To(Exit(0))
jsonArr := test.OutputToStringArray()
Expect(test.OutputToStringArray()).ShouldNot(BeEmpty())
event := events.Event{}
err := json.Unmarshal([]byte(jsonArr[0]), &event)
Expect(err).ToNot(HaveOccurred())
test = podmanTest.Podman([]string{"events", "--stream=false", "--format", "{{json.}}"})
test.WaitWithDefaultTimeout()
Expect(test).To(Exit(0))
jsonArr = test.OutputToStringArray()
Expect(test.OutputToStringArray()).ShouldNot(BeEmpty())
event = events.Event{}
err = json.Unmarshal([]byte(jsonArr[0]), &event)
Expect(err).ToNot(HaveOccurred())
})
It("podman events --until future", func() {
name1 := stringid.GenerateNonCryptoID()
name2 := stringid.GenerateNonCryptoID()
name3 := stringid.GenerateNonCryptoID()
session := podmanTest.Podman([]string{"create", "--name", name1, ALPINE})
session.WaitWithDefaultTimeout()
Expect(session).Should(Exit(0))
var wg sync.WaitGroup
wg.Add(1)
go func() {
defer GinkgoRecover()
defer wg.Done()
// wait 2 seconds to be sure events is running
time.Sleep(time.Second * 2)
session = podmanTest.Podman([]string{"create", "--name", name2, ALPINE})
session.WaitWithDefaultTimeout()
Expect(session).Should(Exit(0))
session = podmanTest.Podman([]string{"create", "--name", name3, ALPINE})
session.WaitWithDefaultTimeout()
Expect(session).Should(Exit(0))
}()
// unix timestamp in 10 seconds
until := time.Now().Add(time.Second * 10).Unix()
result := podmanTest.Podman([]string{"events", "--since", "30s", "--until", fmt.Sprint(until)})
result.Wait(11)
Expect(result).Should(Exit(0))
Expect(result.OutputToString()).To(ContainSubstring(name1))
Expect(result.OutputToString()).To(ContainSubstring(name2))
Expect(result.OutputToString()).To(ContainSubstring(name3))
wg.Wait()
})
})