Rather than assuming a filesystem path, the API service URI is recorded
in the libpod runtime configuration and then reported as requested.
Note: All schemes other than "unix" are hard-coded to report URI exists.
Fixes#12023
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
golang.org/x/crypto/ssh/terminal is deprecated. The package was moved to
golang.org/x/term. golang.org/x/crypto/ssh/terminal was already just
calling golang.org/x/term itslef so there are no functional changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
From a security point of view, it would be nice to be able to map a
rootless usernamespace that does not use your own UID within the
container.
This would add protection against a hostile process escapping the
container and reading content in your homedir.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
`--mount` should allow setting driver specific options using
`volume-opt` when `type=volume` is set.
This ensures parity with docker's `volume-opt`.
Signed-off-by: Aditya R <arajan@redhat.com>
WalkDir should be faster the Walk, since we often do
not need to stat files.
[NO NEW TESTS NEEDED] Existing tests should find errors.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When podman gets an error it prints out "Error: " before
printing the error string. If the error message starts with
error, we end up with
Error: error ...
This PR Removes all of these stutters.
logrus.Error() also prints out that this is an error, so no need for the
error stutter.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
To prevent duplication and potential bugs we should use the same
GetRuntimeDir function that is used in c/common.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Previously, devices with a major/minor number >256 would fail to be
detected. Switch to using bitwise conversion (similar to
sys/sysmacros in C).
[NO NEW TESTS NEEDED]
Signed-off-by: Robb Manes <robbmanes@protonmail.com>
[NO NEW TESTS NEEDED] crun is not available everywhere to test idmap.
Kernel might not be recent enough and not all file systems support
idmap option.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Often users want their overlayed volumes to be `non-volatile` in nature
that means that same `upper` dir can be re-used by one or more
containers but overall of nature of volumes still have to be `overlay`
so work done is still on a overlay not on the actual volume.
Following PR adds support for more advanced options i.e custom `workdir`
and `upperdir` for overlayed volumes. So that users can re-use `workdir`
and `upperdir` across new containers as well.
Usage
```console
$ podman run -it -v myvol:/data:O,upperdir=/path/persistant/upper,workdir=/path/persistant/work alpine sh
```
Signed-off-by: Aditya R <arajan@redhat.com>
Some containers require certain user account(s) to exist within the
container when they are run. This option will allow callers to add a
bunch of passwd entries from the host to the container even if the
entries are not in the local /etc/passwd file on the host.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
pass down the "idmap" mount option to the OCI runtime.
Needs: https://github.com/containers/crun/pull/780
Closes: https://github.com/containers/podman/issues/12154
[NO NEW TESTS NEEDED] there is no crun version yet that support the
new feature.
Test case (must run as root):
podman run --rm -v foo:/foo alpine touch /foo/bar
podman run --uidmap 0:1:1000 --rm -v foo:/foo:idmap alpine ls -l /foo
total 0
-rw-r--r-- 1 root root 0 Nov 15 14:01 bar
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Following PR adds basic pattern matching to filter by labels for `keys`.
Adds support for use-cases like `--filter label=some.prefix.com/key/*`
where end-users want to match a pattern for keys as compared to exact
value.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Equivalent for supported platforms, and makes it easier to support
additional unix-like OSes.
[NO TESTS NEEDED]
Signed-off-by: Maya Rashish <maya@NetBSD.org>
we were adding a negative duration in podman events, causing inputs like
-5s to be correct and 5s to be incorrect.
fixes#11158
Signed-off-by: cdoern <cdoern@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This is the continuation work started in #9711. It turns out
that list/prune commands for volumes in libpod/compat api have
very dangerous error handling when broken filter input is supplied.
Problem also affects network list/prune in libpod. This commit
unifies filter handling across libpod/compat api and adds sanity
apiv2 testcases.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1915332
```
According to the Docker docs, the consistency option should be ignored on Linux.
the possible values are 'cached', 'delegated', and 'consistent', but they should be ignored equally.
This is a widely used option in scripts run by developer machines, as this makes file I/O less horribly slow on MacOS.
```
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
do not check whether the specified ID is valid in the user namespace.
crun handles this case[1], so the check in Podman prevents to get to
the OCI runtime at all.
$ podman run --user 10:0 --uidmap 0:0:1 --rm -ti fedora:33 sh -c 'id; cat /proc/self/uid_map'
uid=10(10) gid=0(root) groups=0(root),65534(nobody)
10 0 1
[1] https://github.com/containers/crun/pull/556
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
