Make sure we use the config field to know if we should use pasta or
slirp4netns as default.
While at it fix broken code which sets the default at two different
places, also do not set in Validate() as this should not modify the
specgen IMO, so set it directly before that.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The problem right now is that --ns contianer: syntax causes use to add
the namespace path to the spec which means the runtime will try to call
setns on that. This works fine for private namespaces but when the host
namspace is used by the container a rootless user is not allowed to
join that namespace so the setns call will return with permission
denied.
The fix is to effectively switch the container to the `host` mode
instead of `container:` when the mention container used the host ns. I
tried to fix this deep into the libpod call when we assign these
namespaces but the problem is that this does not work correctly because
these namespace require much more setup. Mainly different kind of mount
points to work correctly.
We already have similar work-arounds in place for pods because they also
need this.
For some reason this does not work with the user namespace, I don't know
why and I don't think it is really needed so I left this out just to get
at least the rest working. The original issue only reported this for the
network namespace.
Fixes#18027
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
copy the current mapping into a new user namespace, and run into a
separate user namespace.
Closes: https://github.com/containers/podman/issues/17337
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Podman adds an Error: to every error message. So starting an error
message with "error" ends up being reported to the user as
Error: error ...
This patch removes the stutter.
Also ioutil.ReadFile errors report the Path, so wrapping the err message
with the path causes a stutter.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
add two new options to the keep-id user namespace option:
- uid: allow to override the UID used inside the container.
- gid: allow to override the GID used inside the container.
For example, the following command will map the rootless user (that
has UID=0 inside the rootless user namespace) to the UID=11 inside the
container user namespace:
$ podman run --userns=keep-id:uid=11 --rm -ti fedora cat /proc/self/uid_map
0 1 11
11 0 1
12 12 65525
Closes: https://github.com/containers/podman/issues/15294
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
add support for the --uts flag in pod create, allowing users to avoid
issues with default values in containers.conf.
uts follows the same format as other namespace flags:
--uts=private (default), --uts=host, --uts=ns:PATH
resolves#13714
Signed-off-by: Charlie Doern <cdoern@redhat.com>
this patch included additonal host namespace checks when creating a ctr as well
as fixing of the tests to check /proc/self/ns/net
see #14461
Signed-off-by: cdoern <cdoern@redhat.com>
the function `GetDefaultNamespaceMode` for pods checks if we are sharing each namespace
and if not, returns the default which in the case of a network is slirp.
add a switch case for explicitly checking if the pod's network mode is host
and if so, return specgen.Host for the container
resolves#13763
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
When podman-remote is used we should not resolve the default network
mode on the client. Defaults should be set on the server. In this case
this is important because we have different defaults for root/rootless.
So when the client is rootless and the server is root we must pick the
root default.
Note that this already worked when --network was set since we did not
parsed the flag in this case. To reproduce you need --network=default.
Also removed a unused function.
[NO NEW TESTS NEEDED] I tested it manually but I am not sure how I can
hook a test like this up in CI. The client would need to run as rootless
and the server as root or the other way around.
Fixes#14368
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
From a security point of view, it would be nice to be able to map a
rootless usernamespace that does not use your own UID within the
container.
This would add protection against a hostile process escapping the
container and reading content in your homedir.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
add a check in namespaceOptions() that ensures the user is not setting a new uid/gid map
if entering or creating a pod that has an infra container
resolves#12669
Signed-off-by: cdoern <cdoern@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the new networks format to specgen. For api users cni_networks is
still supported to make migration easier however the static ip and mac
fields are removed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make sure we create new containers in the db with the correct structure.
Also remove some unneeded code for alias handling. We no longer need this
functions.
The specgen format has not been changed for now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2030599
When you create pod, it shares the UTS namespace with Containers.
Currently the --hostname is not passed to the pod created when
you create a container and pod in the same command.
Also fix error message on supported --share flags
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
Podman inspect has to show exposed ports to match docker. This requires
storing the exposed ports in the container config.
A exposed port is shown as `"80/tcp": null` while a forwarded port is
shown as `"80/tcp": [{"HostIp": "", "HostPort": "8080" }]`.
Also make sure to add the exposed ports to the new image when the
container is commited.
Fixes#10777
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
One of the side-effects of the `--userns=keep-id` command is
switching the default user of the container to the UID of the
user running Podman (though this can still be overridden by the
`--user` flag). However, it did this by setting the UID and GID
in the OCI spec, and not by informing Libpod of its intention to
switch users via the `WithUser()` option. Because of this, a lot
of the code that should have triggered when the container ran
with a non-root user was not triggering. In the case of the issue
that this fixed, the code to remove capabilities from non-root
users was not triggering. Adjust the keep-id code to properly
inform Libpod of our intention to use a non-root user to fix
this.
Also, fix an annoying race around short-running exec sessions
where Podman would always print a warning that the exec session
had already stopped.
Fixes#9919
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When adding the HOSTNAME environment variable, only do so if it
is not already present in the spec. If it is already present, it
was likely added by the user, and we should honor their requested
value.
Fixes#8886
Signed-off-by: Matthew Heon <mheon@redhat.com>
Docker defines an option of "default" which means to
use the default network. We should support this with
the same code path as --network="".
This is important for compatibility with the Docker API.
Fixes: https://github.com/containers/podman/issues/8544
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Most of the builtin golang functions like os.Stat and
os.Open report errors including the file system object
path. We should not wrap these errors and put the file path
in a second time, causing stuttering of errors when they
get presented to the user.
This patch tries to cleanup a bunch of these errors.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Containers that share IPC Namespaces share each others
/dev/shm, which means a private /dev/shm needs to be setup
for the infra container.
Added a system test and an e2e test to make sure the
/dev/shm is shared.
Fixes: https://github.com/containers/podman/issues/8181
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When a container uses --net=host the default hostname is set to
the host's hostname. However, we were not creating any entries
in `/etc/hosts` despite having a hostname, which is incorrect.
This hostname, for Docker compat, will always be the hostname of
the host system, not the container, and will be assigned to IP
127.0.1.1 (not the standard localhost address).
Also, when `--hostname` and `--net=host` are both passed, still
use the hostname from `--hostname`, not the host's hostname (we
still use the host's hostname by default in this case if the
`--hostname` flag is not passed).
Fixes#8054
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When you execute podman create/run with the --pod new:<name> syntax
the pod was created but the namespaces where not shared and
therefore containers could not communicate over localhost.
Add the default namespaces and pass the network options to the
pod create options.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
As of podman 1.8.0, because of commit da7595a, the default approach of providing
port-forwarding in rootless mode has switched (and been hard-coded) to rootlessport,
for the purpose of providing super performance. The side-effect of this switch is
source within the container to the port-forwarded service always appears to originate
from 127.0.0.1 (see issue #5138).
This commit allows a user to specify if they want to revert to the previous approach
of leveraging slirp4netns add_hostfwd() api which, although not as stellar performance,
restores usefulness of seeing incoming traffic origin IP addresses.
The change should be transparent; when not specified, rootlessport will continue to be
used, however if specifying --net slirp4netns:slirplisten the old approach will be used.
Note: the above may imply the restored port-forwarding via slirp4netns is not as
performant as the new rootlessport approach, however the figures shared in the original
commit that introduced rootlessport are as follows:
slirp4netns: 8.3 Gbps,
RootlessKit: 27.3 Gbps,
which are more than sufficient for many use cases where the origin of traffic is more
important than limits that cannot be reached due to bottlenecks elsewhere.
Signed-off-by: Aleks Mariusz <m.k@alek.cx>
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
If I enter a continer with --userns keep-id, my UID will be present
inside of the container, but most likely my user will not be defined.
This patch will take information about the user and stick it into the
container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently podman run --userns keep-id --user root:root fedora id
The --user flag is ignored. Removing this makes the code work correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
