Prior, a pod would have to be started immediately when created, leading to confusion about what a pod state should be immediately after creation. The problem was podman run --pod ... would error out if the infra container wasn't started (as it is a dependency). Fix this by allowing for recursive start, where each of the container's dependencies are started prior to the new container. This is only applied to the case where a new container is attached to a pod.
Also rework container_api Start, StartAndAttach, and Init functions, as there was some duplicated code, which made addressing the problem easier to fix.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
iFix builtin volumes to work with podman volume
Currently builtin volumes are not recored in podman volumes when
they are created automatically. This patch fixes this.
Remove container volumes when requested
Currently the --volume option on podman remove does nothing.
This will implement the changes needed to remove the volumes
if the user requests it.
When removing a volume make sure that no container uses the volume.
Signed-off-by: Daniel J Walsh dwalsh@redhat.com
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Make sure that all vendored dependencies are in sync with the code and
the vendor.conf by running `make vendor` with a follow-up status check
of the git tree.
* Vendor ginkgo and gomega to include the test dependencies.
Signed-off-by: Chris Evic <cevich@redhat.com>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The toolbox project would benefit from a few changes to more closely
resembe the original atomic cli project. Changes made are:
* only pull image for container runlabel if the label exists in the image
* if a container image does not have the desired label, exit with non-zero
Signed-off-by: baude <bbaude@redhat.com>
Add necessary tweaks to base-image build/import process so that image
can successfully boot with networking enabled. Build the base image and
update ``.cirrus.yml`` accordingly.
Also make a minor improvement to cache-image building to help save space in
GCP image storage. Namely, instead of storing every produced image, export
them into google storage buckets w/ life-cycle enabled. For production use,
they may be converted back into GCE images, otherwise they will expire after
a time.
Signed-off-by: Chris Evich <cevich@redhat.com>
This was specifically disabled early on in transitioning to cirrus due to
an excessive number of test failures and lack of knowledge. This commit
reverses the stance and unifies build and test commands across all
current platforms.
Signed-off-by: Chris Evich <cevich@redhat.com>
Once built, this container can be utilized by automation to help keep
track of VM images. All parameters are passed in via env. vars.
Signed-off-by: Chris Evich <cevich@redhat.com>
Previously we only reported the date/time at the beginning of a run
since it's not available in the Cirrus-CI system. This commit
generalizes the solution, recording start/end times for all major
events.
Also the timestamps are recorded into a local file on the VMs. This
is intended for future use, for example tracking execution-time
trends.
Signed-off-by: Chris Evich <cevich@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
For all in testing involved distribution a new enough CRIU exists as a
package.
Fedora provides CRIU packages directly. For CentOS/RHEL there is a COPR
with the latest CRIU version and for Ubuntu there is a PPA for the
latest CRIU version. Let's use these packages and fall back to building
from git if necessary.
Signed-off-by: Adrian Reber <adrian@lisas.de>
The podbot messages are becoming obnoxious as more distributions are
tested. Only call the `success.sh` script once, after all testing was
successful. Also make update the message to include more helpful text
and url.
Signed-off-by: Chris Evich <cevich@redhat.com>
Frequently debugging of CI-related problems requires going hands-on
within the environment. However, reproducing the environment by hand is
very tedious and error prone. This script permits authorized users to
produce VM's based on any available cache-image, and automatically remove
them upon logout.
Also: Bump up VM disk sizes to 200GB due to performance reasons
Signed-off-by: Chris Evich <cevich@redhat.com>
Since the most recent TWO versions of Fedora are officially supported
upstream, both need to be tested. Implement the concept of a 'prior'
Fedora release in both base-image and cache-image production. Utilize
the produced cache-image to test libpod. Remove F28 testing from PAPR.
Much thanks to @baude @giuseppe for help with this.
Signed-off-by: Chris Evich <cevich@redhat.com>
Occasionally people need to access the VM's for
troubleshooting/debugging. Having an editor pre-installed makes life
easier and doesn't cost any extra test-time.
***CIRRUS: REBUILD IMAGES***
Signed-off-by: Chris Evich <cevich@redhat.com>
A number of images required for future testing are not present in GCE.
Importing them is a long proscribed process prone to errors and
complications.
Improve this situation by documenting, and encoding the majority of the
steps required. Due to the required complexity, these are clearly
identified as 'semi-automated'. This means a discerning eye is
sometimes needed to address unforeseen problems (networking issues,
format or packaging changes, etc).
Nevertheless, having these steps in writing, will reduce current and
future maintenance burden while supporting future testing needs of
RHEL, Fedora and Fedora Atomic Host.
Also:
* Add necessary configuration, scripts, and Makefile updates needed to
prepare RHEL, Fedora, & FAH cloud images for use in GCE. This
is a complex, multi-step process where the cloud image is booted
un a local user-mod qemu-kvm instance, where it can be modified.
From there, it's converted into a specific format, and imported into
GCE. Lastly, the imported raw disk data is made available as a GCE
VM image.
Note: As of this commit, the RHEL base-image builds (CentOS has native
image), however neither RHEL or CentOS cache-images build correctly.
* Left testing on FAH disabled, the GCE/Cirrus integration needs needs more
work. Specifically, the python3-based google startup script service
throws a permission-denied (as root) when trying to create a temp.
directory. Did not investigate further, though manually running the
startup script does allow the libpod tests to start running.
* Enabled Fedora 29 image to execute tests and general use.
* Utilize the standardized F28-based container image for gating
of more the intensive unit and integration testing. Update
documentation to reflect this as the standard platform for
these checks. Rename tasks with shorter names and to better
reflect their purpose.
* Cirrus: Trim unnecessary env vars before testing since the vast
majority are only required for orchestration purposes. Since most
are defined within `.cirrus.yml`, it's a good place to store the
list of undesirables. Since each of the cirrus-scripts runs in
it's own shell, unsetting these near the end will have no
consequence. Also trim down the number of calls to show_env_vars()
Signed-off-by: Chris Evich <cevich@redhat.com>
The packer tool takes JSON as input for the details of producing VM
images to be used for PR CI-testing. JSON is not a very human-friendly
format, without support for comments and frequently containing lots of
duplicate data.
Fix this by using a Makefile + simple python one-liner to convert
from a human-friendly YAML format into packer-native JSON. This allows
use of anchors/aliases to reduce duplication, and allows inline comments
for easier maintainability. This also allows separating the 'test'
action from the 'build' action, for earlier and better syntax problem
detection.
Lastly, there are some minor ``lib.sh`` and ``integration_test.sh``
updates to support future work, and slightly improve the build and
test environments.
Signed-off-by: Chris Evich <cevich@redhat.com>
* Change all store_true or store_false to use store_bool.
New behavior documented in BooleanAction docstring.
* Remove any extraneous code identified by pylint in files from above.
Fixes#1869
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Don't try to argparse command-line arguments on the right-hand
side of the image; those are intended for the container command:
pypodman create fedora ls -l
pypodman run fedora find / -name foo
pypodman run fedora bash -c 'echo hi'
If/when `pypodman exec` gets implemented, it should use this too.
Signed-off-by: Ed Santiago <santiago@redhat.com>
