Kubernetes supports expanding $(FOOBAR) as environment variables within
the kube.YAML. When using podman kube play, we need to do the same, for
supporting these YAML files.
Fixes: #15983
Signed-off-by: Chee Hau Lim <ch33hau@gmail.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fixes a bug where `podman kube play` fails to set a container's Umask
to the default 0022, and sets it to 0000 instead.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Users want to mount a tmpfs file system with secrets, and make
sure the secret is never saved into swap. They can do this either
by using a ramfs tmpfs mount or by passing `noswap` option to
a tmpfs mount.
Fixes: https://github.com/containers/podman/issues/19659
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We need to actually check the output not just exit codes. While doing
this it was clear that the first test was not checking what it should
be so I had to remove the quotes from the arg.
Also this check did not work with remote testing at all, we must set the
env then restart the server as the env for conmon must be set on the
server obviously.
Also we can only match the conmon error messages on the local client.
Lastly this test requires the journald driver but we cannot use the in
container tests so skip it there.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
IPv6 test has been hard-skipped for six months.
IPv4 test is flaking in Cirrus and hard-failing in Gating.
Absent a reliable way to test in CI and gating, and absent
a strong reason to test ICMP in pasta anyway, the solution
is simple.
Closes: #19612
Signed-off-by: Ed Santiago <santiago@redhat.com>
Support a new concept in containers.conf called "modules". A "module"
is a containers.conf file located at a specific directory. More than
one module can be loaded in the specified order, following existing
override semantics.
There are three directories to load modules from:
- $CONFIG_HOME/containers/containers.conf.modules
- /etc/containers/containers.conf.modules
- /usr/share/containers/containers.conf.modules
With CONFIG_HOME pointing to $HOME/.config or, if set, $XDG_CONFIG_HOME.
Absolute paths will be loaded as is, relative paths will be resolved
relative to the three directories above allowing for admin configs
(/etc/) to override system configs (/usr/share/) and user configs
($CONFIG_HOME) to override admin configs.
Pulls in containers/common/pull/1599.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Flake suppression: going with the one-basket model of egg storage,
switch manifest_test to use an image on quay.io (was: k8s.io).
Closes: #19148
Signed-off-by: Ed Santiago <santiago@redhat.com>
This reverts commit 5b148a0a68360892f57603b77e73c69e32fb7b7e.
Reverting to treating the `pull` query parameter as a boolean.
Because of deceiving Docker API documentation it was assumed that the
parameter is pull-policy, however that is not true. Docker does treat
`pull` as a boolean. What is interesting is that Docker indeed accepts
strings like `always` or `never` however Docekr both of these strings
treat as `true`, not as pull-policy. As matter of the fact it seems
there is no such a thing as pull-policy in Docker.
More context https://github.com/containers/podman/issues/17778#issuecomment-1673931925
Signed-off-by: Matej Vasek <mvasek@redhat.com>
...possibly because we somehow ended up with a two-line
log file for a simple 'echo hi'? Make our timestamp-getting
code safer by adding 'head -1'.
Signed-off-by: Ed Santiago <santiago@redhat.com>
We've made rather a mess of those options, due to lack of testing.
Here we have a first step toward regression tests. --env is OK,
but there are three special-case exceptions in --env-file for
three incompatibilities introduced by #19096.
To be continued, but probably in future PRs. We need this ASAP
to prevent us from making any more regressions.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add new --farm flag to podman system connection add so that
a user can add a new connection to a farm immediately.
Update system connection remove such that when a connection is
removed, the connection is also removed from any farms that have it.
Add docs and tests for these changes.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
...to reduce flakes.
Reason: journald makes no guarantees. Just because a systemd job
has finished, or podman has written+flushed log entries, doesn't
mean that journald will actually know about them:
https://github.com/systemd/systemd/issues/28650
Workaround: wrap some podman-logs tests inside Eventually()
so they will be retried when log == journald
This addresses, but does not close, #18501. That's a firehose,
with many more failures than I can possibly cross-reference.
I will leave it open, then keep monitoring missing-logs flakes
over time, and pick those off as they occur.
Signed-off-by: Ed Santiago <santiago@redhat.com>
There is a problem where our tail code does not handles correctly
partial log lines. This makes podman logs --tail output possibly
incorrect lines when k8s-file is used.
This manifests as flake in CI because partial lines are only sometimes
written, basically always when the output is flushed before writing a
newline.
For our code we must not count partial lines which was already done but
the important thing we must keep reading backwards until the next full
(F) line. This is because all partial (P) lines still must be added to
the full line. See the added tests for details on how the log file looks
like.
While fixing this, I rework the tail logic a bit, there is absolutely no
reason to read the lines in a separate goroutine just to pass the lines
back via channel. We can do this in the same routine.
The logic is very simple, read the lines backwards, append lines to
result and then at the end invert the result slice as tail must return
the lines in the correct order. This more efficient then having to
allocate two different slices or to prepend the line as this would
require a new allocation for each line.
Lastly the readFromLogFile() function wrote the lines back to the log
line channel in the same routine as the log lines we read, this was bad
and causes a deadlock when the returned lines are bigger than the
channel size. There is no reason to allocate a big channel size we can
just write the log lines in a different goroutine, in this case the main
routine were read the logs anyway.
A new system test and unit tests have been added to check corner cases.
Fixes#19545
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman should ignore failures to find a cidfile when stoping the
container if the user specified --ignore
Fixes: https://github.com/containers/podman/issues/19546
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
An unhelpful comment doesn't give any clues why this test was originally
skipped on Ubuntu. In any case, now that CI uses Debian SID, re-enable
the test hoping that it now functions.
Signed-off-by: Chris Evich <cevich@redhat.com>
We do not allow volumes and mounts to be placed at the same
location in the container, with create-time checks to ensure this
does not happen. User-added conflicts cannot be resolved (if the
user adds two separate mounts to, say, /myapp, we can't resolve
that contradiction and error), but for many other volume sources,
we can solve the contradiction ourselves via a priority
hierarchy. Image volumes come first, and are overridden by the
`--volumes-from` flag, which are overridden by user-added mounts,
etc, etc. The problem here is that we were not properly handling
volumes-from overriding image volumes. An inherited volume from
--volumes-from would supercede an image volume, but an inherited
mount would not. Solution is fortunately simple - just clear out
the map entry for the other type when adding volumes-from
volumes.
Makes me wish for Rust sum types - conflict resolution would be a
lot simpler if we could use a sum type for volumes and bind
mounts and thus have a single map instead of two maps, one for
each type.
Fixes#19529
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The `Exists` field of the `RemoteSocket` struct is marshaled to json with the
`omitempty` setting. This has the disadvantage that by default `podman info`
shows a `remotePath` entry (the remote path is set in
`pkg/domain/infra/abi/systems.go`: `(*ContainerEngine).Info`) but not that this
path does not exist:
```
❯ podman info --format json | jq .host.remoteSocket
{
"path": "/run/user/1000/podman/podman.sock"
}
```
By removing the `omitempty`, we ensure that the existence is always shown:
```
❯ bin/podman info --format json | jq .host.remoteSocket
{
"path": "/run/user/1000/podman/podman.sock",
"exists": false
}
```
Signed-off-by: Dan Čermák <dcermak@suse.com>
Compat api for containers/stop should take -1 value
Add support for `podman stop --time -1`
Add support for `podman restart --time -1`
Add support for `podman rm --time -1`
Add support for `podman pod stop --time -1`
Add support for `podman pod rm --time -1`
Add support for `podman volume rm --time -1`
Add support for `podman network rm --time -1`
Fixes: https://github.com/containers/podman/issues/17542
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Remove "HTTP if one registry" test. It is a NOP, has been skipped
for two months, and nobody knows what its original purpose was.
Closes: #18768
Signed-off-by: Ed Santiago <santiago@redhat.com>
First, all the defaults for TERM=xterm were removed from c/common, then accordingly the same will be added if encountered a set tty flag.
Signed-off-by: Chetan Giradkar <cgiradka@redhat.com>
Adds support for --add-compression which accepts multiple compression
formats and when used it will add all instances in a manifest list with
requested compression formats.
Signed-off-by: Aditya R <arajan@redhat.com>