If a container with an ID starting with "db1" exists, and a
container named "db1" also exists, and they are different
containers - if I run `podman inspect db1` the container named
"db1" should be inspected, and there should not be an error that
multiple containers matched the name or id "db1". This was
already handled by BoltDB, and now is properly managed by SQLite.
Fixes#17905
Signed-off-by: Matt Heon <mheon@redhat.com>
I found the ginkgolinter[1] by accident, this looks for not optimal
matching and suggest how to do it better.
Overall these fixes seem to be all correct and they will give much
better error messages when something fails.
Check out the repo to see what the linter reports.
[1] https://github.com/nunnatsa/ginkgolinter
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This one has been a thorn in my side: it's a podman-log issue,
but not remote, so I _almost_ retitled #16132 (removing "remote").
Nope, it's a bug in the tests themselves. One solution would be to
podman-wait, but I see no reason for logs to be involved, so I
went with podman start -a instead. This removes the k8s-log stuff
which is no longer necessary. Cleanup all around.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Package `io/ioutil` was deprecated in golang 1.16, preventing podman from
building under Fedora 37. Fortunately, functionality identical
replacements are provided by the packages `io` and `os`. Replace all
usage of all `io/ioutil` symbols with appropriate substitutions
according to the golang docs.
Signed-off-by: Chris Evich <cevich@redhat.com>
In view of https://github.com/containers/storage/pull/1337, do this:
for f in $(git grep -l stringid.GenerateNonCryptoID | grep -v '^vendor/'); do
sed -i 's/stringid.GenerateNonCryptoID/stringid.GenerateRandomID/g' $f;
done
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
When an unsupported limit on cgroups V1 rootless systems
is requested, podman prints an warning message and
ignores the option/flag.
```
Target options/flags:
--cpu-period, --cpu-quota, --cpu-rt-period, --cpu-rt-runtime,
--cpus, --cpu-shares, --cpuset-cpus, --cpuset-mems, --memory,
--memory-reservation, --memory-swap, --memory-swappiness,
--blkio-weight, --device-read-bps, --device-write-bps,
--device-read-iops, --device-write-iops, --blkio-weight-device
```
Related to https://github.com/containers/podman/discussions/10152
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
A number of standard image names were lower-case, leading to
confusion in code such as:
registry := podman(... , "-n", "registry", registry, ...)
^--- variable ^---- constant
Fix a number of those to be capitalized and with _IMAGE suffix:
registry := podman(..., REGISTRY_IMAGE
Signed-off-by: Ed Santiago <santiago@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Two for this error:
invalid indirect of pod.Spec.DNSConfig.Options[0]
...and one for a gofmt error (spaces).
Signed-off-by: Ed Santiago <santiago@redhat.com>
This is a very late followup to my ginkgo-improving work of 2021.
It has been stuck since December because it requires gomega 1.17,
which we've just enabled.
This commit is simply a copy-paste of a command I saved in
my TODO list many months ago:
sed -i -e 's/Expect(\([^ ]\+\)\.\([a-zA-Z0-9]\+\))\.To(Equal(/Expect(\1).To(HaveField(\"\2\", /' test/e2e/*_test.go
Signed-off-by: Ed Santiago <santiago@redhat.com>
It seems this breaks older version of `podman-remote` users hence it
looks like this patch would be a better candidate for podman `5.0`
Problem
* Client with `4.0` cannot interact with a server of `4.1`
Plan this patch for podman `5.0`
This reverts commit 0cebd158b6d8da1828b1255982e27fe9224310d0.
Signed-off-by: Aditya R <arajan@redhat.com>
Convert container entrypoint from string to an array inorder to make
sure there is parity between `podman inspect` and `docker inspect`
Signed-off-by: Aditya R <arajan@redhat.com>
add a check in namespaceOptions() that ensures the user is not setting a new uid/gid map
if entering or creating a pod that has an infra container
resolves#12669
Signed-off-by: cdoern <cdoern@redhat.com>
Fix a handful of instances not covered by earlier automated
replacements. Found via:
ack 'Expect\(len' test/e2e
There are still a bunch of BeNumerically(">", ...) that cannot (yet)
be handled by HaveLen(). Leave those as they are.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Write a BeValidJSON() matcher, and replace IsJSONOutputValid():
sed -i -e 's/Expect(\(.*\)\.IsJSONOutputValid()).To(BeTrue())/Expect(\1.OutputToString())\.To(BeValidJSON())/' test/e2e/*_test.go
(Plus a few manual tweaks)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Many ginkgo tests have been written to use this evil form:
GrepString("foo")
Expect(that to BeTrue())
...which yields horrible useless messages on failure:
false is not true
Identify those (automatically, via script) and convert to:
Expect(output to ContainSubstring("foo"))
...which yields:
"this output" does not contain substring "foo"
There are still many BeTrue()s left. This is just a start.
This is commit 1 of 2. It includes the script I used, and
all changes to *.go are those computed by the script.
Commit 2 will apply some manual fixes.
Signed-off-by: Ed Santiago <santiago@redhat.com>
(Sorry, couldn't resist).
CI flakes have been coming down - thank you to everyone who has
been making them a priority.
This leaves a noisy subset that I've just been ignoring for months:
Running: podman ... -p 8080:something
...cannot listen on the TCP port: listen tcp4 :8080: bind: address already in use
Sometimes these are one-time errors resolved on 2nd try; sometimes
they fail three times, forcing CI user to hit Rerun. In all cases
they make noise in my flake logs, which costs me time.
My assumption is that this has to do with ginkgo running random
tests in parallel. Since many e2e tests simplemindedly use 8080,
collisions are inevitable.
Solution: simplemindedly replace 8080 with other (also arbitrarily
picked) numbers. This is imperfect -- it requires human developers
to pick a number NNNN and 'grep NNNN test/e2e/*' before adding
new tests, which I am 100% confident ain't gonna happen -- but
it's better than what we have now.
Side note: I considered writing and using a RandomAvailablePort()
helper, but that would still be racy. Plus, it would be a pain
to interpolate strings into so many places. Finally, with this
hand-tooled approach, if/when we _do_ get conflicts on port NNNN,
it should be very easy to grep for NNNN, find the offending tests
that reuse that port, and fix one of them.
Signed-off-by: Ed Santiago <santiago@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
The initial version of libimage changed the order of layers which has
now been restored to remain backwards compatible.
Further changes:
* Fix a bug in the journald logging which requires to strip trailing
new lines from the message. The system tests did not pass due to
empty new lines. Triggered by changing the default logger to
journald in containers/common.
* Fix another bug in the journald logging which embedded the container
ID inside the message rather than the specifid field. That surfaced
in a preceeding whitespace of each log line which broke the system
tests.
* Alter the system tests to make sure that the k8s-file and the
journald logging drivers are executed.
* A number of e2e tests have been changed to force the k8s-file driver
to make them pass when running inside a root container.
* Increase the timeout in a kill test which seems to take longer now.
Reasons are unknown. Tests passed earlier and no signal-related
changes happend. It may be CI VM flake since some system tests but
other flaked.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The libpod network logic knows about networks IDs but OCICNI
does not. We cannot pass the network ID to OCICNI. Instead we
need to make sure we only use network names internally. This
is also important for libpod since we also only store the
network names in the state. If we would add a ID there the
same networks could accidentally be added twice.
Fixes#9451
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure we pass the ip and mac address as CNI_ARGS to
the cnitool which is executed in the rootless-cni-infra
container.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Currently podman implements --override-arch and --overide-os
But Podman has made these aliases for --arch and --os. No
reason to have to specify --override, since it is clear what
the user intends.
Currently if the user specifies an --override-arch field but the
image was previously pulled for a different Arch, podman run uses
the different arch. This PR also fixes this issue.
Fixes: https://github.com/containers/podman/issues/8001
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For docker compatibility we need to support --platform
flag.
podman create --platform
podman run --platform
podman pull --platform
Since we have --override-os and --override-arch already
this can be done just by modifying the client to split
the --platform call into os and arch and then pass those
options to the server side.
Fixes: https://github.com/containers/podman/issues/6244
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
in an effort to speed up the remote testing, we should be using
lookaside storage to avoid pull images as well as importing multiple
images into the RW store.
one test was removed and added into system test by Ed in #8325
Signed-off-by: baude <bbaude@redhat.com>
Followon to #7965 (mirror registry). mirror.gcr.io doesn't
cache all the images we need, and I can't find a way to
add to its cache, so let's just use quay.io for those
images that it can't serve.
Tools used:
skopeo copy --all docker://docker.io/library/alpine:3.10.2 \
docker://quay.io/libpod/alpine:3.10.2
...and also:
docker.io/library/alpine:3.2
docker.io/library/busybox:latest
docker.io/library/busybox:glibc
docker.io/library/busybox:1.30.1
docker.io/library/redis:alpine
docker.io/libpod/alpine-with-bogus-seccomp:label
docker.io/libpod/alpine-with-seccomp:label
docker.io/libpod/alpine_healthcheck:latest
docker.io/libpod/badhealthcheck:latest
Since most of those were new quay.io/libpod images, they required
going in through the quay.io GUI, image, settings, Make Public.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Detached containers and detach keys are only created with the podman run, i
exec, and start commands. We do not store the detach key sequence or the
detach flags in the database, nor does Docker. The current code was ignoreing
these fields but documenting that they can be used.
Fix podman create man page and --help output to no longer indicate that
--detach and --detach-keys works.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If run&create image returns error: image contains manifest list, not a runnable image, find the local image that has digest matching the digest from the list and use the image from local storage for the command.
Signed-off-by: Qi Wang <qiwan@redhat.com>
Most have been fixed, others I replaced with SkipIfRemote
Fix ContainerStart on tunnel, it needs to wait for the exit status
before returning.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Now that Dan has added helpful comments to each SkipIfRemote,
let's take the next step and include those messages in the
Skip() output so someone viewing test results can easily
see if a remote test is skipped for a real reason or for
a FIXME.
This commit is the result of a simple:
perl -pi -e 's;(SkipIfRemote)\(\)(\s+//\s+(.*))?;$1("$3");' *.go
in the test/e2e directory, with a few minor (manual) changes
in wording.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Enables podman create, pull, run, import to use --signature-policy option. Set it as hidden flag to be consistent with other commands.
Signed-off-by: Qi Wang <qiwan@redhat.com>
because a pod's network information is dictated by the infra container at creation, a container cannot be created with network attributes. this has been difficult for users to understand. we now return an error when a container is being created inside a pod and passes any of the following attributes:
* static IP (v4 and v6)
* static mac
* ports -p (i.e. -p 8080:80)
* exposed ports (i.e. 222-225)
* publish ports from image -P
Signed-off-by: Brent Baude <bbaude@redhat.com>
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
