Attempts to fix#16419
podman generate systemd --restart-sec pod
^now generates RestartSec= both in pod service file and in container service file.
podman generate systemd --restart-sec container
^now generates RestartSec= in container service file.
Signed-off-by: Veronika Fuxova <vfuxova@redhat.com>
`--format json` should not be the same as `--format {{json .}}`, the
later should actually run through the go template and thus create one
json object per entry instead of an json array.
Includes a vendor of c/common@main since it requires a fix from there as
well.
This matches docker compat.
Fixes#16436
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman-remote` does not support `--events-backend`, which overrides a
log driver. When `--events-backend` is necessary in a test for
`podman-remote`, the test should be skipped.
We don't need to fix the other cases with
`_additional_events_backend()` because `_log_test_follow()` already has
the same skipping logic and `_log_test_multi()` always skips a test when
testing `podman-remote`.
Signed-off-by: Hironori Shiina <shiina.hironori@fujitsu.com>
Up - do not fail if volume already exists, use the existing one
Down - allow the user to remove the volume by passing --force
Add tests
Update the documentation
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
When we are using a proxy, 'podman build - basic test'
will be failed on remote.
This test needs to add the '--http-proxy' option.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
_test_skopeo_credential_sharing() used port_is_free() to check if a
port has no active listeners. With the new implementation, this is
not equivalent anymore: a port might be in TIME_WAIT, so it's not
free, but the listener might be long gone.
Add tcp_port_probe() to check if there's an active listener on a
given port, and use it in _test_skopeo_credential_sharing().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
These tests should cover all the basic networking functionality with
pasta(1). Namely, they check:
- IPv4 and IPv6 addressing and routing settings
- TCP and UDP port forwarding over IPv4 and IPv6
- data transfers and ICMP/ICMPv6 echo requests
- the (exceedingly simple) lifecycle handling
These tests need some new helpers, to obtain IPv4 and IPv4 addresses
and routes, as well as MTU and interface names. Those use jq(1) for
parsing.
Some availability checks are implemented as well, to skip tests if
pasta(1) is not available, or if IPv4 and IPv6 are not usable.
To get consistent outcomes across distributions, and to enable
uncomplicated termination for UDP tests based on zero-sized packets,
use socat(1), which, unlike netcat, doesn't suffer from option
inconsistencies depending on flavours (traditional, BSD, NMAP) and
versions.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The main helpers.bash file is rather bloated and it's difficult to
find stuff there. Move networking functions to their own helper
file.
While at it, apply a consistent style, and rearrange logically
related functions into sections.
Suggested-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Using bash /dev/tcp/ pseudo-device files to probe for bound ports has
indeed the advantage of simplicity, but comes with a few drawbacks:
- it will actually send data to unsuspecting services that might be
running in the same network namespace as the tests, possibly
causing unwanted interactions
- it doesn't allow for UDP probing
- it makes it impossible to clearly distinguish between different
address bindings
Replace that approach with a new helper, port_is_bound(), that uses
procfs entries at /proc/net to detect bound ports, without the need
for active probing.
We can now implement optional parameters in callers, to check if a
port if free for binding to a given address, including any IPv4
(0.0.0.0) or any IPv6 (::0) address, and for a given protocol, TCP
or UDP.
Extend random_free_port() and random_free_port_range() to support
that.
The implementation of one function in the file
test/system/helpers.bash, namely ipv6_to_procfs(), and the
implementation of the corresponding own test, delimited by the
markers "# BEGIN ipv6_to_procfs" and "# END ipv6_to_procfs" in the
file test/system/helpers.c was provided, on the public forum at:
https://github.com/containers/podman/pull/16141
by Ed Santiago <santiago@redhat.com>, who expressly invited me to
include them in this code submission.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently, wait_for_port() duplicates the check logic implemented by
port_is_free().
Add an optional argument to port_is_free(), representing the bound
address to check, and call it, dropping the direct check in
wait_for_port().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It looks like #16132 was my fault: a missing 'wait' for a container
to exit. Let's see if this fixes the flake.
And, while poking through flake logs, I found another missing wait.
And... in wait_for_output(), address a potential race.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This one has been a thorn in my side: it's a podman-log issue,
but not remote, so I _almost_ retitled #16132 (removing "remote").
Nope, it's a bug in the tests themselves. One solution would be to
podman-wait, but I see no reason for logs to be involved, so I
went with podman start -a instead. This removes the k8s-log stuff
which is no longer necessary. Cleanup all around.
Signed-off-by: Ed Santiago <santiago@redhat.com>
As far as I can tell there is no reason to use apk in these tests. They
just build an image and check for it and never use the installed binary.
Network calls are always unstable and therefore should be avoided when
possible, this ensures no/less flakes.
Fixes#16391
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Remove the container/pod ID file along with the container/pod. It's
primarily used in the context of systemd and are not useful nor needed
once a container/pod has ceased to exist.
Fixes: #16387
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
--insecure and --verbose flags for docker compatibility
--tls-verify for syntax compatibility and allow users to inspect
manifests at remote Container Registiries without requiring tls.
Helps fix: https://github.com/containers/podman/issues/14917
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
there is already the same check when using cgroupfs, but not when
using the systemd cgroup backend. The check is needed to avoid a
confusing error from the OCI runtime.
Closes: https://github.com/containers/podman/issues/16376
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We have CI tests running in netavark mode when CNI is desired.
Add a new .cirrus.yml envariable, CI_DESIRED_NETWORK, which
we then force-check in e2e and system tests. Simple copy/paste
of #14912 (the RUNTIME check) with manual s/RUNTIME/NETWORK/
and other minor changes.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When I first enabled buildah-bud tests under podman-remote (#9887),
I got one aspect all wrong: I added a podman-remote() helper function
to match the podman() one. Turns out it's never actually called,
even when $PODMAN_BINARY=podman-remote, because functions/aliases
don't work that way.
The way it works is, those few cases in which bud.bats runs
podman are not magically remapped to podman-remote, they use
the podman() function. That's where we need to check if
we're using podman-remote, and that's where we need to
remove the registry-and-rootdir options.
With this fix, we can reenable two previously-skipped bud tests.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add the abilitiy to deploy the generated kube yaml to a
kubernetes cluster with the podman kube apply command.
Add support to directly apply containers, pods, or volumes
by passing in their names or ids to the command.
Use the kubernetes API endpoints and http requests to connect
to the cluster and deploy the various kubernetes object kinds.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Basically, acknowledge the need for dependencies and link
to Fedora specfile which is the only sane place to find
such a list.
Closes: #16365
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only want to report if user created local customized storage in
/etc/containers/storage.conf or in
$HOME/.config/containers/storage.conf, when resetting storage.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
