Add a new flag to set the start timeout for a generated systemd unit.
To make naming consistent, add a new --stop-timeout flag as well and let
the previous --time map to it.
Fixes: #11618
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Non-podman clients do not set `layers` while making request. This is
supposed to be `true` bydefault but `non-podman-clients i.e Docker` dont
know about this field as a result they end up setting this values to
`false`. Causing builds to never use cache for layers.
Adds compatiblity for `docker SDK`.
[NO NEW TESTS NEEDED]
Signed-off-by: Aditya Rajan <arajan@redhat.com>
There is a problem with creating and storing the exit command when the
container was created. It only contains the options the container was
created with but NOT the options the container is started with. One
example would be a CNI network config. If I start a container once, then
change the cni config dir with `--cni-config-dir` ans start it a second
time it will start successfully. However the exit command still contains
the wrong `--cni-config-dir` because it was not updated.
To fix this we do not want to store the exit command at all. Instead we
create it every time the conmon process for the container is startet.
This guarantees us that the container cleanup process is startet with
the correct settings.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Support `checkpoint --pre-checkpoint`
* Support `checkpoint --with-previous`
* Disable `restore --import-previous` for the remote client since we had
to send two files which in turn would require to tar them up and hence
be a breaking change. Podman 4.0 would be the chance and I hope we'll
find time before that to remote-restore prettier.
Note that I did not run over swagger yet to check whether all parameters
are actually documented due to time constraints.
Fixes: #12334
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Nothing was working before, and it's too much to summarize. To make
sure we're not regressing in the future again, enable the remote e2e
tests.
Fixes: #12007
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman adds a few environment variables by default, and
currently there is no way to get rid of them from your container.
This option will allow you to specify which defaults you don't
want.
--unsetenv-all will remove all default environment variables.
Default environment variables can come from podman builtin,
containers.conf or from the container image.
Fixes: https://github.com/containers/podman/issues/11836
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This adds the parameter '--print-stats' to 'podman container restore'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to restore a checkpoint and print out these
information. CRIU already creates process restore statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the restored container, Podman will now print
out JSON:
# podman container restore --latest --print-stats
{
"podman_restore_duration": 305871,
"container_statistics": [
{
"Id": "47b02e1d474b5d5fe917825e91ac653efa757c91e5a81a368d771a78f6b5ed20",
"runtime_restore_duration": 140614,
"criu_statistics": {
"forking_time": 5,
"restore_time": 67672,
"pages_restored": 14
}
}
]
}
The output contains 'podman_restore_duration' which contains the
number of microseconds Podman required to restore the checkpoint. The
output also includes 'runtime_restore_duration' which is the time
the runtime needed to restore that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
This adds the parameter '--print-stats' to 'podman container checkpoint'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to create a checkpoint and print out these
information. CRIU already creates checkpointing statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the checkpointed container, Podman will now print
out JSON:
# podman container checkpoint --latest --print-stats
{
"podman_checkpoint_duration": 360749,
"container_statistics": [
{
"Id": "25244244bf2efbef30fb6857ddea8cb2e5489f07eb6659e20dda117f0c466808",
"runtime_checkpoint_duration": 177222,
"criu_statistics": {
"freezing_time": 100657,
"frozen_time": 60700,
"memdump_time": 8162,
"memwrite_time": 4224,
"pages_scanned": 20561,
"pages_written": 2129
}
}
]
}
The output contains 'podman_checkpoint_duration' which contains the
number of microseconds Podman required to create the checkpoint. The
output also includes 'runtime_checkpoint_duration' which is the time
the runtime needed to checkpoint that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
'--memory-swappiness=0' used to work. This patch fixes the regression
issue, which was caused by the change of infra container creation
process.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Docker/Moby always create the working directory, and some tools
rely on that behavior (example, woodpecker/drone).
Fixes#11842
Signed-off-by: Michael Scherer <misc@redhat.com>
* Implement API query parameter stream and delay for containers and
pods top endpoints
* Update swagger with breaking changes
* Add python API tests for endpoints
Fixes#12115
Signed-off-by: Jhon Honce <jhonce@redhat.com>
So far, the infra containers of pods required pulling down an image
rendering pods not usable in disconnected environments. Instead, build
an image locally which uses local pause binary.
Fixes: #10354
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We should only use the Containerfiles/Dockerfiles found in the context
directory.
Fixes: https://github.com/containers/podman/issues/12054
[NO NEW TESTS NEEDED] It is difficult to setup a test for this in the
CI/CD system, but build tests should find if this PR broke anything.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Following commit makes sure when buildah tag is invoked on a manifest
list, it tags the same manifest list instead of resolving to an image and
tagging it.
Port of: https://github.com/containers/buildah/pull/3483
Signed-off-by: Aditya Rajan <arajan@redhat.com>
* Increase timeout for tests to 10s
* To aid in debugging add PID to shutdown package logging
* Added new message for forced service shutdown
* Always wait for HTTP server to shutdown, duration of 0 not friendly
to clients
Note: The log event
"IdleTracker: StateClosed transition by connection marked un-managed"
denotes a TCP connection has been initiated but no HTTP request was sent.
And is expected during these tests.
Fixes#11921
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* JSON and API description fields are no longer truncated. Formatting
moved to client, better support of MVP.
* --no-trunc now defaults to true
* Updated tests for changes
Closes#11894
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Refactor sidecar HTTP service for /debug/pprof endpoints to use a TCP
address given via new podman system service --pprof-address flag
* Allow same URL parsing in "system service" as bindings/connection.go
* Refactor NewServerWithSettings() to use entities.ServiceOptions
in place of deleted server.Options
* Updated godoc for impacted functions and types
* Fixed API service Shutdown() to do an orderly shutdown when
terminated and running with --time=0
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Vendor the latest HEAD in c/common to pull in changes for a faster
inspection of images. Previously, only the size computation was
optional, now the one for the parent image is as well.
In many cases, the parent image is not needed but it takes around 10ms
on my local machine. With this change, we cut off 10ms from many code
paths, most importantly, container creation.
[NO NEW TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a note the global swagger docs about some fields not showing
up in responses as they are set to omitempty. Also add a note about
null values for complicated field types that swagger-go has a hard time
with.
[NO TESTS NEEDED]
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
This option will setup the containers to not modify their /etc/hosts
file and just use the one from the image.
Fixes: https://github.com/containers/podman/issues/9500
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
