The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This was inspired by https://github.com/cri-o/cri-o/pull/3934 and
much of the logic for it is contained there. However, in brief,
a named return called "err" can cause lots of code confusion and
encourages using the wrong err variable in defer statements,
which can make them work incorrectly. Using a separate name which
is not used elsewhere makes it very clear what the defer should
be doing.
As part of this, remove a large number of named returns that were
not used anywhere. Most of them were once needed, but are no
longer necessary after previous refactors (but were accidentally
retained).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
If the first time you run podman in a user account you do a
su - USER, and the second time, you run as the logged in USER
podman fails, because it is not handling the tmpdir definition
in the database. This PR fixes this problem.
vendor containers/common v0.11.1
This should fix a couple of issues we have seen in podman 1.9.1
with handling of libpod.conf.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In order to better support kata containers and systemd containers
container-selinux has added new types. Podman should execute the
container with an SELinux process label to match the container type.
Traditional Container process : container_t
KVM Container Process: containre_kvm_t
PID 1 Init process: container_init_t
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
`gocritic` is a powerful linter that helps in preventing certain kinds
of errors as well as enforcing a coding style.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Updates the podman info command to show registries from v1 config file
in the search table format.
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
After a restart, pods and containers both run a refresh()
function to prepare to run after a reboot. Until now, volumes
have not had a similar function, because they had no per-boot
setup to perform.
Unfortunately, this was not noticed when in-memory locking was
introduced to volumes. The refresh() routine is, among other
things, responsible for ensuring that locks are reserved after a
reboot, ensuring they cannot be taken by a freshly-created
container, pod, or volume. If this reservation is not done, we
can end up with two objects using the same lock, potentially
needing to lock each other for some operations - classic recipe
for deadlocks.
Add a refresh() function to volumes to perform lock reservation
and ensure it is called as part of overall refresh().
Fixes#4605Fixes#4621
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Refactor the `RuntimeConfig` along with related code from libpod into
libpod/config. Note that this is a first step of consolidating code
into more coherent packages to make the code more maintainable and less
prone to regressions on the long runs.
Some libpod definitions were moved to `libpod/define` to resolve
circular dependencies.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Move to containers/image v5 and containers/buildah to v1.11.4.
Replace an equality check with a type assertion when checking for a
docker.ErrUnauthorizedForCredentials in `podman login`.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
if the cgroup manager is set to systemd, detect if dbus is available,
otherwise fallback to --cgroup-manager=cgroupfs.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
make sure the user overrides are stored in the configuration file when
first created.
Closes: https://github.com/containers/libpod/issues/2659
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is a horrible hack to work around issues with Fedora 31, but
other distros might need it to, so we'll move it upstream.
I do not recommend this functionality for general use, and the
manpages and other documentation will reflect this. But for some
upgrade cases, it will be the only thing that allows for a
working system.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This requires updating all import paths throughout, and a matching
buildah update to interoperate.
I can't figure out the reason for go.mod tracking
github.com/containers/image v3.0.2+incompatible // indirect
((go mod graph) lists it as a direct dependency of libpod, but
(go list -json -m all) lists it as an indirect dependency),
but at least looking at the vendor subdirectory, it doesn't seem
to be actually used in the built binaries.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
If a user upgrades to a machine that defaults to a cgroups V2 machine
and has a libpod.conf file in their homedir that defaults to OCI Runtime runc,
then we want to change it one time to crun.
runc as of this point does not work on cgroupV2 systems. This patch will
eventually be removed but is needed until runc has support.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If c/storage paths are explicitly set to "" (the empty string) it
will use compiled-in defaults. However, it won't tell us this via
`storage.GetDefaultStoreOptions()` - we just get the empty string
(which can put our defaults, some of which are relative to
c/storage, in a bad spot).
Hardcode a sane default for cases like this. Furthermore, add
some sanity checks to paths, to ensure we don't use relative
paths for core parts of libpod.
Fixes#3952
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
drop the pkg/firewall module and start using the firewall CNI plugin.
It requires an updated package for CNI plugins.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add ability to not activate sd_notify when running under varlink as it
causes deadlocks and hangs.
Fixes: #3572
Signed-off-by: baude <bbaude@redhat.com>
when creating the default libpod.conf file, be sure the default OCI
runtime is cherry picked from the system configuration.
Closes: https://github.com/containers/libpod/issues/3781
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
