Basically, we want to force the application in the container to
(iff the container was made with a terminal) redraw said terminal
immediately after an attach completes, so the fresh Attach
session will be able to see what's going on (e.g. will have a
shell prompt). Our current attach functions are unfortunately
geared more towards `podman run` than `podman attach` and will
start forwarding resize events *immediately* instead of waiting
until the attach session is alive (much safer for short-lived
`podman run` sessions, but broken for the `podman attach` case).
To avoid a major rewrite, let's just manually send a SIGWINCH
after attach succeeds to force a redraw.
Fixes#6253
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Problem: if either of the two "podman network create" tests
fail, all subsequent retries will also fail because the
created network has not been cleaned up (so "network create"
will fail with EEXIST).
Solution: run "podman network rm" as deferred cleanup instead
of in each test.
This is NOT a fix for #7583 - it is just a way to allow
ginkgo to retry a failing test.
Signed-off-by: Ed Santiago <santiago@redhat.com>
this is an option that allows a user to specify whether to share PID namespace in the pod
for play kube and generate kube
associated test added
Signed-off-by: Peter Hunt <pehunt@redhat.com>
- run tests: better "skip" message for docker-archive test;
remove FIXME, document that podman-remote doesn't support it
- run tests: instrument the --conmon-pidfile test in hopes
of tracking down flake #7580: cross-check pidfile against
output of 'podman inspect', and add some debug messages
that will only be seen on test failure.
- load tests: the pipe test: save and load a temporary tag,
not $IMAGE. Primary reason is because of #7371, in which
'podman load' assigns a new image ID (instead of preserving
the saved one). This messes with our image management, and
it turns out to be nonfixable.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add auth.json(5) link to login/logout docs. Provide more details about the usage of auth.json by podman-login.
Signed-off-by: Qi Wang <qiwan@redhat.com>
when joining an existing container user namespace, read the existing
mappings so the storage can be created with the correct ownership.
Closes: https://github.com/containers/podman/issues/7547
Signed-off-by: Giuseppe Scrivano <giuseppe@scrivano.org>
To ensure that the user running in the container ahs a valid
entry in /etc/passwd so lookup functions for the current user
will not error, Podman previously began adding entries to the
passwd file. We did not, however, add entries to the group file,
and this created problems - our passwd entries included the group
the user is in, but said group might not exist. The solution is
to mirror our logic for /etc/passwd modifications to also edit
/etc/group in the container.
Unfortunately, this is not a catch-all solution. Our logic here
is only advanced enough to *add* to the group file - so if the
group already exists but we add a user not a part of it, we will
not modify that existing entry, and things remain inconsistent.
We can look into adding this later if we absolutely need to, but
it would involve adding significant complexity to this already
massively complicated function.
While we're here, address an edge case where Podman could add a
user or group whose UID overlapped with an existing user or
group.
Also, let's make users able to log into users we added. Instead
of generating user entries with an 'x' in the password field,
indicating they have an entry in /etc/shadow, generate a '*'
indicating the user has no password but can be logged into by
other means e.g. ssh key, su.
Fixes#7503Fixes#7389Fixes#7499
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Since --pull is deprecated, remove it from help and hide if from --help
Also set it to true by default.
Share image pull code betweern podman image pull and podman container runlabel.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877181
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
After attaching to a container, we wait for the container to finish and
return its exit code. Waiting for the container may not always succeed,
for instance, when the container has been force removed by another
process. In such case, we have to look at the *last* container-exit
event.
Also refactor the `ContainerRun` method a bit to return early on errors
and de-spaghetti the code.
Enable the remote-disabled system test.
Fixes: #7117
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
All VM-building functionality has been migrated to
https://github.com/containers/automation_images
Some container-build functions are still maintained here
but are on a very-short list to also be migrated to
the repository linked above.
Signed-off-by: Chris Evich <cevich@redhat.com>
Current podman container runlabel --display is being ignored.
This is just supposed to display the command that would be run, and
then exit, but instead is actually running the command.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877186
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
During the redesign of podman 2.0, we dropped the support for --oom-score-adj.
Test for this flag was bogus and thus passing when it was broken.
Basically just need to set the value in the spec.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877187
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Invert the branch logic to match the comment. Docker seems to wait for
the container while Podman does not.
Enable the remote-disabled system test as well.
Fixes: #7135
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The systemd generator looks for certain flags in the containers' create
commands to determine which flags need to be added. In case of named
containers, the generator adds the `--replace` flag to prevent name
conflicts at container creation. Fix the generator to not only cover
the `--name foo` syntax but also the `--name=foo` one.
Fixes: #7157
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently this command blows up because it closes the file descriptor before
doing the build.
Add tests to make sure we don't regress.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877188
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Prior to this commit the value of the `--cert-dir` flag
specified for `podman manifest push` was not handled by the internal
code.
That resulted in `podman manifest push` not reading the certificates
stored inside of the directory specified by the user.
Signed-off-by: Flavio Castelli <fcastelli@suse.com>
Extend the flags of `podman manifest add` to include also:
* cert-dir
* auth-file
* creds
* tls-verify
These options are useful when adding to a manifest an image that is not
part of the local image store. The image resides on a remote registry
that falls into one of these cases: it's not using tls termination, it requires
authentication or it's secured with an unknown tls certificate.
Consider the following scenario: a multi architecture manifest is created as
part of a multi-step CI pipeline running in a containerized way.
All the images referenced by the manifest live inside of a registry
secured with a self-signed tls certificate.
Without this patch the manifest creation step would have to pull all the
multi-architecture images locally via `podman pull`.
With this patch the usage of `podman pull` would not be needed because the
images' digests can be requested straight to the registry. That means the
execution of manifest creation step would be faster and result in less disk
space and network bandwidth being used.
Finally, this is a propagation of a similar fix done inside of buildah
via https://github.com/containers/buildah/pull/2593
Signed-off-by: Flavio Castelli <fcastelli@suse.com>
The `podman ps --all` command will now show containers that
are under the control of other c/storage container systems and
the new `ps --storage` option will show only containers that are
in c/storage but are not controlled by libpod.
In the below examples, the '*working-container' entries were created
by Buildah.
```
podman ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9257ef8c786c docker.io/library/busybox:latest ls /etc 8 hours ago Exited (0) 8 hours ago gifted_jang
d302c81856da docker.io/library/busybox:latest buildah 30 hours ago storage busybox-working-container
7a5a7b099d33 localhost/tom:latest ls -alF 30 hours ago Exited (0) 30 hours ago hopeful_hellman
01d601fca090 localhost/tom:latest ls -alf 30 hours ago Exited (1) 30 hours ago determined_panini
ee58f429ff26 localhost/tom:latest buildah 33 hours ago storage alpine-working-container
podman ps --external
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
d302c81856da docker.io/library/busybox:latest buildah 30 hours ago external busybox-working-container
ee58f429ff26 localhost/tom:latest buildah 33 hours ago external alpine-working-container
```
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Usage:
```
$ podman network create foo
$ podman run -d --name web --hostname web --network foo nginx:alpine
$ podman run --rm --network foo alpine wget -O - http://web.dns.podman
Connecting to web.dns.podman (10.88.4.6:80)
...
<h1>Welcome to nginx!</h1>
...
```
See contrib/rootless-cni-infra for the design.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
