Add quiet and no-info flags to podman machine start.
No-info suppresses helpful informational tips
Quiet suppresses machine start progress output, as well as informational
tips.
Signed-off-by: Ashley Cui <acui@redhat.com>
`--format json` should not be the same as `--format {{json .}}`, the
later should actually run through the go template and thus create one
json object per entry instead of an json array.
Includes a vendor of c/common@main since it requires a fix from there as
well.
This matches docker compat.
Fixes#16436
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Up - do not fail if volume already exists, use the existing one
Down - allow the user to remove the volume by passing --force
Add tests
Update the documentation
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Remove the container/pod ID file along with the container/pod. It's
primarily used in the context of systemd and are not useful nor needed
once a container/pod has ceased to exist.
Fixes: #16387
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
--insecure and --verbose flags for docker compatibility
--tls-verify for syntax compatibility and allow users to inspect
manifests at remote Container Registiries without requiring tls.
Helps fix: https://github.com/containers/podman/issues/14917
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the abilitiy to deploy the generated kube yaml to a
kubernetes cluster with the podman kube apply command.
Add support to directly apply containers, pods, or volumes
by passing in their names or ids to the command.
Use the kubernetes API endpoints and http requests to connect
to the cluster and deploy the various kubernetes object kinds.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
The rest of the code has been using golang.org/x/* for the IsTerminal()
API for a long time, not github.com/mattn/go-isatty. It seems better to
stick to packages from the golang.org domain, whenever possible, and one
less dependency is always a good thing.
The modules were not cleaned up with 'make vendor' because 'go mod tidy'
was running into:
go: error loading go 1.16 module graph:
github.com/containers/image/v5@v5.23.1-0.20221015133641-1921a1993c67
requires
github.com/honeycombio/beeline-go@v1.9.0 requires
github.com/mattn/go-sqlite3@v2.0.3+incompatible: reading
github.com/mattn/go-sqlite3/go.mod at revision v2.0.3: unknown
revision v2.0.3
If reproducibility with go 1.16 is not needed:
go mod tidy -compat=1.17
Since go.mod already requires Go 1.17, the following commands were
manually run:
$ go mod tidy -compat=1.17
$ go mod vendor
$ go mod verify
Further modifications to go.sum were done manually based on the
complaints from postbuild.sh run by the CI.
[NO NEW TESTS NEEDED] as it's not a functional change.
Fixes: 85db895012bead6b ("logging: new mode -l passthrough")
Signed-off-by: Debarshi Ray <rishi@fedoraproject.org>
The binary name is not the same as in the old quadlet, and can anyway
differ in system and user runs, so use os.Args[0] to get the right name
in the comment.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Truncate the container and pod ID files instead of throwing an error.
The main motivation is to prevent redundant work when starting systemd
units. Throwing an error when the file already exists is not preventing
races or file corruptions, so let's leave that to the user which in
almost all cases are generated (and tested) systemd units.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This ignores the create request if the named volume already exists.
It is very useful when scripting stuff.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Use `Default()` instead of re-loading containers.conf.
Also rework how the containers.conf objects are handled for parsing the
CLI. Previously, we were conflating "loading the defaults" with
"storing values from the CLI" with "libpod may further change fields"
which ultimately led to various bugs and test failues.
To address the issue, separate the defaults from the values from the CLI
and properly name the fields to make the semantics less ambiguous.
[NO NEW TESTS NEEDED] as it's not a functional change.
Fixes: containers/common/issues/1200
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Fixed the issue of `--format` and `--verbose` flags being allowed in
combination with one another.
Implemented functionality for `--format json` or `--format '{{ json }}' `.
Implemented command-completion help for `--format`.
Fixes: #16204
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Reduce the number of top-level packages in ./pkg by moving quadlet
packages under ./pkg/systemd.
[NO NEW TESTS NEEDED] - no functional change.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Fix two bugs in `system df`:
1. The total size was calculated incorrectly as it was creating the sum
of all image sizes but did not consider that a) the same image may
be listed more than once (i.e., for each repo-tag pair), and that
b) images share layers.
The total size is now calculated directly in `libimage` by taking
multi-layer use into account.
2. The reclaimable size was calculated incorrectly. This number
indicates which data we can actually remove which means the total
size minus what containers use (i.e., the "unique" size of the image
in use by containers).
NOTE: The c/storage version is pinned back to the previous commit as it
is buggy. c/common already requires the buggy version, so use a
`replace` to force/pin.
Fixes: #16135
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Based on the initial port in https://github.com/containers/quadlet/pull/41
This contains the unit tests and the testcases from the C code as well
as modification to the podman spec file based on what the quadlet
spec file looks like, producing a podman-quadlet subpackage.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Motivated to have a working `make lint` on Fedora 37 (beta).
Most changes come from the new `gofmt` standards.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The new cobra update fixed a bug which caused some options to not be
included in --help when there was already a option with the same name
on a parent command.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixed issue where executing the command `podman pod logs -l` would panic
because it was indexing into an empty arguments array.
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
This patch extends the podman run command with support for checkpoint
images. When `podman run` is invoked with an image that contains
a checkpoint, it would restore the container from that checkpoint.
Example:
podman run -d --name looper busybox /bin/sh -c \
'i=0; while true; do echo $i; i=$(expr $i + 1); sleep 1; done'
podman container checkpoint --create-image checkpoint-image-1 looper
podman run checkpoint-image-1
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
Podman allows to store a container checkpoints as an images.
This patch makes the check that is used to recognise such checkpoint
images reusable by moving it in utils. This functionality will be reused
in a subsequent patch to extend the `podman run` command with support
for checkpoint images.
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
add the key used in newly initialized machines to the user's known_hosts file. This ensures that golang will be able to ssh into the machine using
podman-remote. Also, remove the /dev/null redirection for podman machine ssh's known_hosts file.
resolves#15347
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Changes since 2022-09-09:
- man page: add --skip-unused-stages (buildah 4249)
- man page: bring in new Note for --cache-ttl (4248)
- system tests: de-stutter (4205)
- (internal): in skip() applier: escape asterisk, otherwise
the "bud with --dns* flags" sed expression never applies.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow overwrite of the signature-policy file
by passing signature-policy flag to podman save command
Closes: https://github.com/containers/podman/issues/15869
Signed-off-by: 😎Mostafa Emami <mustafaemami@gmail.com>
