Write a BeValidJSON() matcher, and replace IsJSONOutputValid():
sed -i -e 's/Expect(\(.*\)\.IsJSONOutputValid()).To(BeTrue())/Expect(\1.OutputToString())\.To(BeValidJSON())/' test/e2e/*_test.go
(Plus a few manual tweaks)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Standardize on no-trunc through the code.
Alias notruncate where necessary.
Standardize on the man page display of no-trunc.
Fixes: https://github.com/containers/podman/issues/8941
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add some more tests, document cases where remote will not work
Add FIXMEs for tests that should work on podman-remote but currently
do not.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
in an effort to speed up the remote testing, we should be using
lookaside storage to avoid pull images as well as importing multiple
images into the RW store.
one test was removed and added into system test by Ed in #8325
Signed-off-by: baude <bbaude@redhat.com>
Currently `podman image unmount` report every image that is mounted
when it unmounts them. We should only report unmounted actually mounted images.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
There are many use cases where you want to just mount an image
without creating a container on it. For example you might want
to just examine the content in an image after you pull it for
security analysys. Or you might want to just use the executables
on the image without running it in a container.
The image is mounted readonly since we do not want people changing
images.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We should default to the user name unmount rather then the internal
name of umount.
Also User namespace was not being handled correctly. We want to inform
the user that if they do a mount when in rootless mode that they have
to be first in the podman unshare state.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
As rootless, `podman mount` must be run inside `podman unshare`.
We don't really have a testing harness that can do this right
now.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Remove the annotation from the umount command to make mount tests pass
and let podman-umount run as a non-root user.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add two unit tests to determine whether mounts are being listed
correctly. One tests that a created container is not listed
until mounted. The second checks that running containers are
mounted, and then no longer listed as mounted when they stop
running. The final test creates three containers, mounts two,
and checks that mount correctly only lists the two mounted.
Signed-off-by: gabi beyer <gabrielle.n.beyer@intel.com>
Add '.To(BeTrue())' to 'Expect(' statements in unit tests that
are missing them. These tests weren't being compared to anything,
thus reporting false positives.
Signed-off-by: gabi beyer <gabrielle.n.beyer@intel.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
We have little to no testing to make sure we don't break podman image and
podman container commands that wrap traditional commands.
This PR adds tests for each of the commands.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
Because our tests are getting so long, we want to be able to audit which tests are taking
the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore
should be auditable.
Also, make speed improvements to tests by making sure we only unpack caches images that
actually get used.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1178
Approved by: mheon
Completion of the migration from bats to ginkgo. This includes:
* load
* mount
* pause
* port
* run_networking
* search
Note: build will be done within a different PR
Signed-off-by: baude <bbaude@redhat.com>
