This was added by commit 84e42877a ("make lint: re-enable revive"),
making nolintlint became almost useless.
Remove the ungodly amount of unused nolint annotations.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
GoLang sets unset values to the default value of the type. This means that the destination of the log is an empty string and the count and size are set to 0. However, this means that size and count are unbounded, and this is not the default behavior.
Fixes: https://github.com/containers/podman/issues/25473
Fixes: https://issues.redhat.com/browse/RHEL-83262
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add a new option to allow for mounting artifacts in the container, the
syntax is added to the existing --mount option:
type=artifact,src=$artifactName,dest=/path[,digest=x][,title=x]
This works very similar to image mounts. The name is passed down into
the container config and then on each start we lookup the artifact and
the figure out which blobs to mount. There is no protaction against a
user removing the artifact while still being used in a container. When
the container is running the bind mounted files will stay there (as the
kernel keeps the mounts active even if the bind source was deleted).
On the next start it will fail to start as if it does not find the
artifact. The good thing is that this technically allows someone to
update the artifact with the new file by creating a new artifact with
the same name.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixes: https://github.com/containers/podman/issues/25002
Also add the ability to inspect containers for
UseImageHosts and UseImageHostname.
Finally fixed some bugs in handling of --no-hosts for Pods,
which I descovered.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --hosts-file flag to container create, container run and pod create
* Add HostsFile field to pod inspect and container inspect results
* Test BaseHostsFile config in containers.conf
Signed-off-by: Gavin Lam <gavin.oss@tutamail.com>
These flags can affect the output of the HealtCheck log. Currently, when a container is configured with HealthCheck, the output from the HealthCheck command is only logged to the container status file, which is accessible via `podman inspect`.
It is also limited to the last five executions and the first 500 characters per execution.
This makes debugging past problems very difficult, since the only information available about the failure of the HealthCheck command is the generic `healthcheck service failed` record.
- The `--health-log-destination` flag sets the destination of the HealthCheck log.
- `none`: (default behavior) `HealthCheckResults` are stored in overlay containers. (For example: `$runroot/healthcheck.log`)
- `directory`: creates a log file named `<container-ID>-healthcheck.log` with JSON `HealthCheckResults` in the specified directory.
- `events_logger`: The log will be written with logging mechanism set by events_loggeri. It also saves the log to a default directory, for performance on a system with a large number of logs.
- The `--health-max-log-count` flag sets the maximum number of attempts in the HealthCheck log file.
- A value of `0` indicates an infinite number of attempts in the log file.
- The default value is `5` attempts in the log file.
- The `--health-max-log-size` flag sets the maximum length of the log stored.
- A value of `0` indicates an infinite log length.
- The default value is `500` log characters.
Add --health-max-log-count flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-max-log-size flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-log-destination flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
This started off as an attempt to make `podman stop` on a
container started with `--rm` actually remove the container,
instead of just cleaning it up and waiting for the cleanup
process to finish the removal.
In the process, I realized that `podman run --rmi` was rather
broken. It was only done as part of the Podman CLI, not the
cleanup process (meaning it only worked with attached containers)
and the way it was wired meant that I was fairly confident that
it wouldn't work if I did a `podman stop` on an attached
container run with `--rmi`. I rewired it to use the same
mechanism that `podman run --rm` uses, so it should be a lot more
durable now, and I also wired it into `podman inspect` so you can
tell that a container will remove its image.
Tests have been added for the changes to `podman run --rmi`. No
tests for `stop` on a `run --rm` container as that would be racy.
Fixes#22852
Fixes RHEL-39513
Signed-off-by: Matt Heon <mheon@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
SpecGen is our primary container creation abstraction, and is
used to connect our CLI to the Libpod container creation backend.
Because container creation has a million options (I exaggerate
only slightly), the struct is composed of several other structs,
many of which are quite large.
The core problem is that SpecGen is also an API type - it's used
in remote Podman. There, we have a client and a server, and we
want to respect the server's containers.conf. But how do we tell
what parts of SpecGen were set by the client explicitly, and what
parts were not? If we're not using nullable values, an explicit
empty string and a value never being set are identical - and we
can't tell if it's safe to grab a default from the server's
containers.conf.
Fortunately, we only really need to do this for booleans. An
empty string is sufficient to tell us that a string was unset
(even if the user explicitly gave us an empty string for an
option, filling in a default from the config file is acceptable).
This makes things a lot simpler. My initial attempt at this
changed everything, including strings, and it was far larger and
more painful.
Also, begin the first steps of removing all uses of
containers.conf defaults from client-side. Two are gone entirely,
the rest are marked as remove-when-possible.
[NO NEW TESTS NEEDED] This is just a refactor.
Signed-off-by: Matt Heon <mheon@redhat.com>
* Add BaseHostsFile to container configuration
* Do not copy /etc/hosts file from host when creating a container using Docker API
Signed-off-by: Gavin Lam <gavin.oss@tutamail.com>
add a new option --preserve-fd that allows to specify a list of FDs to
pass down to the container.
It is similar to --preserve-fds but it allows to specify a list of FDs
instead of the maximum FD number to preserve.
--preserve-fd and --preserve-fds are mutually exclusive.
It requires crun since runc would complain if any fd below
--preserve-fds is not preserved.
Closes: https://github.com/containers/podman/issues/20844
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Add --rdt-class=COS to the create and run command to enable the
assignment of a container to a Class of Service (COS). The COS
represents a part of the cache based on the Cache Allocation Technology
(CAT) feature that is part of Intel's Resource Director Technology
(Intel RDT) feature set. By assigning a container to a COS, all PID's of
the container have only access to the cache space defined for this COS.
The COS has to be pre-configured based on the resctrl kernel driver.
cat_l2 and cat_l3 flags in /proc/cpuinfo represent CAT support for cache
level 2 and 3 respectively.
Signed-off-by: Wolfgang Pross <wolfgang.pross@intel.com>
First do not lint pkg/domain/infra/abi with the remote tag as this is
only local code.
Then mark the cacheLibImage field as unused, this should be an unused
stub for the remote client so that we do not leak libimage.
The linter sees that with the remote tag so we need to silence that
warning.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is the last place were the remote client pulls in libimage, with
this the podman-remote binary size decreases from 44788 KB to
39424 KB (not stripped).
This change simply fixes that by gating it behind the remote build tag.
Of course it would be a bit cleaner to never leak libimage into
pkg/specgen and only have it in pkg/specgen/generate. But this would be
much more involved with big chnages so I went with the easy and quick
way instead.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Restart policy of initContainers should not be overriden by pod and
the restart policy should always be "no".
See #16343
Signed-off-by: Tony Duan <tony.duan@gapp.nthu.edu.tw>
Currently Podman prevents SELinux container separation,
when running within a container. This PR adds a new
--security-opt label=nested
When setting this option, Podman unmasks and mountsi
/sys/fs/selinux into the containers making /sys/fs/selinux
fully exposed. Secondly Podman sets the attribute
run.oci.mount_context_type=rootcontext
This attribute tells crun to mount volumes with rootcontext=MOUNTLABEL
as opposed to context=MOUNTLABEL.
With these two settings Podman inside the container is allowed to set
its own SELinux labels on tmpfs file systems mounted into its parents
container, while still being confined by SELinux. Thus you can have
nested SELinux labeling inside of a container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* add tests
* add documentation for --shm-size-systemd
* add support for both pod and standalone run
Signed-off-by: danishprakash <danish.prakash@suse.com>
If you are running temporary containers within podman play kube
we should really be running these in read-only mode. For automotive
they plan on running all of their containers in read-only temporal
mode. Adding this option guarantees that the container image is not
being modified during the running of the container.
The containers can only write to tmpfs mounted directories.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Startup healthchecks are similar to K8S startup probes, in that
they are a separate check from the regular healthcheck that runs
before it. If the startup healthcheck fails repeatedly, the
associated container is restarted.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Also create one constant for ErrDuplicateDest, rather then have the same
value set three times.
Fixes: https://github.com/containers/podman/issues/4217
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For systems that have extreme robustness requirements (edge devices,
particularly those in difficult to access environments), it is important
that applications continue running in all circumstances. When the
application fails, Podman must restart it automatically to provide this
robustness. Otherwise, these devices may require customer IT to
physically gain access to restart, which can be prohibitively difficult.
Add a new `--on-failure` flag that supports four actions:
- **none**: Take no action.
- **kill**: Kill the container.
- **restart**: Restart the container. Do not combine the `restart`
action with the `--restart` flag. When running inside of
a systemd unit, consider using the `kill` or `stop`
action instead to make use of systemd's restart policy.
- **stop**: Stop the container.
To remain backwards compatible, **none** is the default action.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Allow end users to preprocess default environment variables before
injecting them into container using `--env-merge`
Usage
```
podman run -it --rm --env-merge some=${some}-edit --env-merge
some2=${some2}-edit2 myimage sh
```
Closes: https://github.com/containers/podman/issues/15288
Signed-off-by: Aditya R <arajan@redhat.com>
[NO NEW TESTS NEEDED]
our native API was consuming the docker compat type for the API since the two have the exact same name. Fix this by renaming
LogConfig to LogConfigLibpod
resolves#15138
Signed-off-by: Charlie Doern <cdoern@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
Following PR adds support for running containers from a manifest list
present on localstorage. Before this PR podman only supports running
containers from valid images but not from manifest list.
So `podman run -it --platform <some> <manifest-list> command` should
become functional now and users should be able to resolve images on the
bases of provided `--platform` string.
Example
```
podman manifest create test
podman build --platform linux/amd64,linux/arm64 --manifest test .
podman run --rm --platform linux/arm64/v8 test uname -a
```
Closes: https://github.com/containers/podman/issues/14773
Signed-off-by: Aditya R <arajan@redhat.com>
It allows to customize the entry that is written to the `/etc/passwd`
file when --passwd is used.
Closes: https://github.com/containers/podman/issues/13185
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The API endpoints should properly honour the `no_hosts=true` setting in
containers.conf.
Fixes#13719
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This option causes Podman to not only remove the specified containers
but all of the containers that depend on the specified
containers.
Fixes: https://github.com/containers/podman/issues/10360
Also ran codespell on the code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Some containers require certain user account(s) to exist within the
container when they are run. This option will allow callers to add a
bunch of passwd entries from the host to the container even if the
entries are not in the local /etc/passwd file on the host.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for a new flag --passwd which, when false prohibits podman from creating entries in
/etc/passwd and /etc/groups allowing users to modify those files in the container entrypoint
resolves#11805
Signed-off-by: cdoern <cdoern@redhat.com>
Add the new networks format to specgen. For api users cni_networks is
still supported to make migration easier however the static ip and mac
fields are removed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman adds a few environment variables by default, and
currently there is no way to get rid of them from your container.
This option will allow you to specify which defaults you don't
want.
--unsetenv-all will remove all default environment variables.
Default environment variables can come from podman builtin,
containers.conf or from the container image.
Fixes: https://github.com/containers/podman/issues/11836
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Honor custom `target` if specified while running or creating containers
with secret `type=mount`.
Example:
`podman run -it --secret token,type=mount,target=TOKEN ubi8/ubi:latest
bash`
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Docker/Moby always create the working directory, and some tools
rely on that behavior (example, woodpecker/drone).
Fixes#11842
Signed-off-by: Michael Scherer <misc@redhat.com>
The new mac address type broke the api docs. While we could
successfully generate the swagger file it could not be viewed in a
browser.
The problem is that the swagger generation create two type definitions
with the name `HardwareAddr` and this pointed back to itself. Thus the
render process was stucked in an endless loop. To fix this manually
rename the new type to MacAddress and overwrite the types to string
because the json unmarshaller accepts the mac as string.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Create a new mac address type which supports json marshal/unmarshal from
and to string. This change is backwards compatible with the previous
versions as the unmarshal method still accepts the old byte array or
base64 encoded string.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
