Many dependencies started using go 1.22 which means we have to follow in
order to update.
Disable the now depracted exportloopref linter as it was replaced by
copyloopvar as go fixed the loop copy problem in 1.22[1]
Another new chnage in go 1.22 is the for loop syntax over ints, the
intrange linter chacks for this but there a lot of loops that have to be
converted so I didn't do it here and disable th elinter for now, th eold
syntax is still fine.
[1] https://go.dev/blog/loopvar-preview
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman machine list now supports a new option, --all-providers, which lists all machines from all providers.
Signed-off-by: Ashley Cui <acui@redhat.com>
Example:
DefaultEnvironment="VAR1=word1 word2" VAR2=word3 "VAR3=word 5 6"
Sets three variables "VAR1", "VAR2", "VAR3".
Double quote is not escaped, as there is no chance it appears in a proxy value. User can still espace it if really necessary
Signed-off-by: Philippe Martin <phmartin@redhat.com>
Fix one minor issue with vfkit error handling. First checking if err !=
nil OR errors.Is() is pointless as the err != is already true.
Second nilerr complains because we return nil when we hit an error
branch, in this case this is correct because an error means VM is
stopped.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It qemu cannot be compiled anyway so make sure we do not try to compile
parts where the typechecker complains about on windows.
Also all the e2e test files are only used on linux as well.
pkg/machine/wsl also reports some error but to many for me to fix them
now. One minor problem was fixed in pkg/machine/machine_windows.go.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
By enabling UserKnownHostsFile=/dev/null, and CheckHostIP=no
options to the defaults we prevent the user from adding the host key
multiple times and from flakes that can raise Remote Host Id change.
Resolves: https://github.com/containers/podman/issues/23505
Signed-off-by: Nicola Sella <nsella@redhat.com>
Read stderr from ssh-keygen before calling wait(), since cmd.Wait() closes cmd.StderrPipe() after it exits, causing a read-on-closed-pipe error.
Signed-off-by: Ashley Cui <acui@redhat.com>
When removing the gvproxy pid file, under CI conditions we could hit a
case where the PID file being removed seemed to have an open handle on
it still. I could not find anything in podman that left an open handle
and gvproxy would have quit before this, so we think it is likely
another process holding it. I could not find root cause with CI because
I could not trip the flake.
this new code allows windows (specifically hyperv bc WSL does not use
GVProxy) to ignore an ERROR_SHARING_VIOLATION.
Signed-off-by: Brent Baude <bbaude@redhat.com>
This adds generic utility to convert file system path into URL structure.
Instead of string manipulation it uses URL parsing and building routines.
Appending absolute path to `unix:///` URL out of the box correctly
handles URL format on Windows platform, where filepath should be prepended
by additional `/` before drive letter.
Signed-off-by: Arthur Sengileyev <arthur.sengileyev@gmail.com>
When the file is empty it is possible our code panics as bar.ProxyReader
returns nil when the bar is finished which is the case for 0 size as it
doesn't have to read anything from there. However as this happens on
different goroutines it is race and most of the time still works.
To fix this simply skip the progress bar setup for empty files.
While at it fix the deprecated argument in the tests.
Fixes#23281
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
In case of timeouts actually log the command again and make sure to send
SIGABRT to the process as go will create a useful stack strace where we
can see where things are hanging. It also kill the process unlike the
default Eventually().Should(Exit()) call the leaves the process around.
The output will be captured by default in the log so we just see the
stack trace there.
And while at it bump the timout up to 10 mins, we are hitting hard
flakes in CI where machine init takes longer than 5 mins for unknown
reasons but this seems to be good enough.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently all podman machine rm errors in AfterEach were ignored.
This means some leaked and caused issues later on, see #22844.
To fix it first rework the logic to only remove machines when needed at
the place were they are created using DeferCleanup(), however
DeferCleanup() does not work well together with AfterEach() as it always
run AfterEach() before DeferCleanup(). As AfterEach() deletes the dir
the podman machine rm call can not be done afterwards.
As such migrate all cleanup to use DeferCleanup() and while I have to
touch this fix the code to remove the per file duplciation and define
the setup/cleanup once in the global scope.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
On linux and macos the connections are stored under the home dir by
default so it is not a problem there but on windows we first check
the APPDATA env and use this dir as config storage. This has the problem
that it is not cleaned up after each test as such connections might leak
into the following test causing failues there.
Fixes#22844
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The driver is now hardcoded again, and there can only be
one type of mounts at a time (which one changes over time)
Revert "Make it possible to select the volume driver"
This reverts commit 6630e5cf66.
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Close loophole that would allow you to assign more memory than the
system has to a podman machine
Fixes: #18206
Signed-off-by: Brent Baude <bbaude@redhat.com>
The logs are not verbose if `--debug` is not set, and very useful to
have if gvproxy exits unexpectedly.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
This PR is a couple of small fixes so that our CI would be capable of running the machine test suite on the libkrun provider.
RUN-2172
Signed-off-by: Brent Baude <bbaude@redhat.com>
Podman machine reset now removes and resets machines from all providers availabe on the platform.
On windows, if the user is does not have admin privs, machine will only reset WSL, but will emit a warning that it is unable to remove hyperV machines without elevated privs.
Signed-off-by: Ashley Cui <acui@redhat.com>
One problem on FCOS is that the root directory is immutable, as such in
order to mount arbitrary paths from the host we must make it mutable
again and create these dir on boot in order to be able to mount there.
The current logic was racy as it used one unit for each path and they
all did chattr -i /; mkdir -p $path; chattr -i / and systemd can run
these units in parallel. That means it was possible for another unit to
make / immutable before the unit could do the mkdir. I pointed this out
on the original PR[1] but we never followed up on it...
Now this here changes several things. First have one unit that does the
chattr -i / (immutable-root-off.service), it is hooked into
remote-fs-pre.target which means it is executed before the network
mounts (virtiofs) are done.
Then we have another unit that does chattr +i /
(immutable-root-on.service) which turn the immutable root back on after
remote-fs.target which means all mount are done at this point.
Additionally the automount unit is removed because it does not add any
value for us and it was borken anyway as it used the virtiofs tag as
path so systemd just ignored it.
[1] https://github.com/containers/podman/pull/20612#discussion_r1384846241Fixes#22569
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The current timeout was not long enough. Systemd default is 90s so we
should wait for at least that long. Also it really doesn't make sense to
throw an error we saying we failed waiting for stop. We should hard
terminate the VM in case a graceful shutdown did not happen.
Fixes#22515
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Stop copying the pre-pulled uncompressed machine disk into the individual test dir. The machine pull code already makes a copy of the disk into the test's HOMEDIR/.local/share/containers/podman/machine, and works off that copy.
Before the change: TESTDIR/<image> is copied to TESTDIR/podman_test/<image> by the test, and then podman machine copies the image to TESTDIR/podman_test/.local/share/containers/podman/machine/provider/<image>
After the change: TESTDIR/<image> is copied to TESTDIR/podman_test/.local/share/containers/podman/machine/provider/<image> by podman machine
The image that is actually run is at TESTDIR/podman_test/.local/share/containers/podman/machine/provider/<image> in both instances.
Signed-off-by: Ashley Cui <acui@redhat.com>
We do a soft stop via systemd to allow graceful shutdown behavior.
Hoewever for unknown reason we are hitting such a case in CI right now.
Regardless of the CI issue we should always to the hard terminate in
such case so only log the timeout as warning.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
First of some commands ignored cmd.Wait() error which means it was
impossible to notice any command errors. And others only returned
the wait error as it which when a command fails is just
`exit status <code>` which is not helpful at all.
This commit should add proper error wrapping with stderr to get useful
strings back hopefully.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
