In `podman inspect` output for containers and pods, we include
the command that was used to create the container. This is also
used by `podman generate systemd --new` to generate unit files.
With remote podman, the generated create commands were incorrect
since we sourced directly from os.Args on the server side, which
was guaranteed to be `podman system service` (or some variant
thereof). The solution is to pass the command along in the
Specgen or PodSpecgen, where we can source it from the client's
os.Args.
This will still be VERY iffy for mixed local/remote use (doing a
`podman --remote run ...` on a remote client then a
`podman generate systemd --new` on the server on the same
container will not work, because the `--remote` flag will slip
in) but at the very least the output of `podman inspect` will be
correct. We can look into properly handling `--remote` (parsing
it out would be a little iffy) in a future PR.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add a `context.Context` to the log APIs to allow for cancelling
streaming (e.g., via `podman logs -f`). This fixes issues for
the remote API where some go routines of the server will continue
writing and produce nothing but heat and waste CPU cycles.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We weren't actually halting the goroutine that sent events, so it
would continue sending even when the channel closed (the most
notable cause being early hangup - e.g. Control-c on a curl
session). Use a context to cancel the events goroutine and stop
sending events.
Fixes#6805
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
As part of APIv2 Attach, we need to be able to attach to freshly
created containers (in ContainerStateConfigured). This isn't
something Libpod is interested in supporting, so we use Init() to
get the container into ContainerStateCreated, in which attach is
possible. Problem: Init() will fail if dependencies are not
started, so a fresh container in a fresh pod will fail. The
simplest solution is to extend the existing recursive start code
from Start() to Init(), allowing dependency containers to be
started when we initialize the container (optionally, controlled
via bool).
Also, update some comments in container_api.go to make it more
clear how some of our major API calls work.
Fixes#6646
Signed-off-by: Matthew Heon <mheon@redhat.com>
To terminate a connection of varlink, say after sending a file, we need to send a message containing a delimiter of ':' so the client knows to hang up.
Fixes: #6237
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add more default options parsing
Switch to using --time as opposed to --timeout to better match Docker.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Added support for system service
* Enabled linting on the varlinkapi source, needed to support V2
service command
* Added support for PODMAN_SOCKET
Skip linting deprecated code
Rather than introduce bugs by correcting deprecated code, linting the
code is being skipped. Code that is being ported into V2 is being
checked.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
add the ability to attach to a running container. the tunnel side of this is not enabled yet as we have work on the endpoints and plumbing to do yet.
add the ability to exec a command in a running container. the tunnel side is also being deferred for same reason.
Signed-off-by: Brent Baude <bbaude@redhat.com>
using the factory approach similar to container, we now create pods based on a pod spec generator. wired up the podmanv2 pod create command, podcreatewithspec binding, simple binding test, and apiv2 endpoint.
also included some code refactoring as it introduced as easy circular import.
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add second go routine for when a Timer is not needed.
* goimports updated some project files
Fixes#5531
Signed-off-by: Jhon Honce <jhonce@redhat.com>
As part of the rework of exec sessions, we need to address them
independently of containers. In the new API, we need to be able
to fetch them by their ID, regardless of what container they are
associated with. Unfortunately, our existing exec sessions are
tied to individual containers; there's no way to tell what
container a session belongs to and retrieve it without getting
every exec session for every container.
This adds a pointer to the container an exec session is
associated with to the database. The sessions themselves are
still stored in the container.
Exec-related APIs have been restructured to work with the new
database representation. The originally monolithic API has been
split into a number of smaller calls to allow more fine-grained
control of lifecycle. Support for legacy exec sessions has been
retained, but in a deprecated fashion; we should remove this in
a few releases.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Enables most of the network-related functionality from
`podman run` in `podman pod create`. Custom CNI networks can be
specified, host networking is supported, DNS options can be
configured.
Also enables host networking in `podman play kube`.
Fixes#2808Fixes#3837Fixes#4432Fixes#4718Fixes#4770
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When we finish building an image, we try to look up its ID by looking up
the image using the name that we were asked to assign to the image. If
we weren't asked to assign a name to the image, that would produce an
error. The BuildImage() API we're using returns the image's ID anyway,
so we can skip the lookup and just return the ID directly.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Create service command
Use cd cmd/service && go build .
$ systemd-socket-activate -l 8081 cmd/service/service &
$ curl http://localhost:8081/v1.24/images/json
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Correct Makefile
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Two more stragglers
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Report errors back as http headers
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Split out handlers, updated output
Output aligned to docker structures
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Refactored routing, added more endpoints and types
* Encapsulated all the routing information in the handler_* files.
* Added more serviceapi/types, including podman additions. See Info
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Cleaned up code, implemented info content
* Move Content-Type check into serviceHandler
* Custom 404 handler showing the url, mostly for debugging
* Refactored images: better method names and explicit http codes
* Added content to /info
* Added podman fields to Info struct
* Added Container struct
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add a bunch of endpoints
containers: stop, pause, unpause, wait, rm
images: tag, rmi, create (pull only)
Signed-off-by: baude <bbaude@redhat.com>
Add even more handlers
* Add serviceapi/Error() to improve error handling
* Better support for API return payloads
* Renamed unimplemented to unsupported these are generic endpoints
we don't intend to ever support. Swarm broken out since it uses
different HTTP codes to signal that the node is not in a swarm.
* Added more types
* API Version broken out so it can be validated in the future
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Refactor to introduce ServiceWriter
Signed-off-by: Jhon Honce <jhonce@redhat.com>
populate pods endpoints
/libpod/pods/..
exists, kill, pause, prune, restart, remove, start, stop, unpause
Signed-off-by: baude <bbaude@redhat.com>
Add components to Version, fix Error body
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add images pull output, fix swarm routes
* docker-py tests/integration/api_client_test.py pass 100%
* docker-py tests/integration/api_image_test.py pass 4/16
+ Test failures include services podman does not support
Signed-off-by: Jhon Honce <jhonce@redhat.com>
pods endpoint submission 2
add create and others; only top and stats is left.
Signed-off-by: baude <bbaude@redhat.com>
Update pull image to work from empty registry
Signed-off-by: Jhon Honce <jhonce@redhat.com>
pod create and container create
first pass at pod and container create. the container create does not
quite work yet but it is very close. pod create needs a partial
rewrite. also broken off the DELETE (rm/rmi) to specific handler funcs.
Signed-off-by: baude <bbaude@redhat.com>
Add docker-py demos, GET .../containers/json
* Update serviceapi/types to reflect libpod not podman
* Refactored removeImage() to provide non-streaming return
Signed-off-by: Jhon Honce <jhonce@redhat.com>
create container part2
finished minimal config needed for create container. started demo.py
for upcoming talk
Signed-off-by: baude <bbaude@redhat.com>
Stop server after honoring request
* Remove casting for method calls
* Improve WriteResponse()
* Update Container API type to match docker API
Signed-off-by: Jhon Honce <jhonce@redhat.com>
fix namespace assumptions
cleaned up namespace issues with libpod.
Signed-off-by: baude <bbaude@redhat.com>
wip
Signed-off-by: baude <bbaude@redhat.com>
Add sliding window when shutting down server
* Added a Timeout rather than closing down service on each call
* Added gorilla/schema dependency for Decode'ing query parameters
* Improved error handling
* Container logs returned and multiplexed for stdout and stderr
* .../containers/{name}/logs?stdout=True&stderr=True
* Container stats
* .../containers/{name}/stats
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Improve error handling
* Add check for at least one std stream required for /containers/{id}/logs
* Add check for state in /containers/{id}/top
* Fill in more fields for /info
* Fixed error checking in service start code
Signed-off-by: Jhon Honce <jhonce@redhat.com>
get rest of image tests for pass
Signed-off-by: baude <bbaude@redhat.com>
linting our content
Signed-off-by: baude <bbaude@redhat.com>
more linting
Signed-off-by: baude <bbaude@redhat.com>
more linting
Signed-off-by: baude <bbaude@redhat.com>
pruning
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]apiv2 pods
migrate from using args in the url to using a json struct in body for
pod create.
Signed-off-by: baude <bbaude@redhat.com>
fix handler_images prune
prune's api changed slightly to deal with filters.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]enabled base container create tests
enabling the base container create tests which allow us to get more into
the stop, kill, etc tests. many new tests now pass.
Signed-off-by: baude <bbaude@redhat.com>
serviceapi errors: append error message to API message
I dearly hope this is not breaking any other tests but debugging
"Internal Server Error" is not helpful to any user. In case, it
breaks tests, we can rever the commit - that's why it's a small one.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
serviceAPI: add containers/prune endpoint
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
add `service` make target
Also remove the non-functional sub-Makefile.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
add make targets for testing the service
* `sudo make run-service` for running the service.
* `DOCKERPY_TEST="tests/integration/api_container_test.py::ListContainersTest" \
make run-docker-py-tests`
for running a specific tests. Run all tests by leaving the env
variable empty.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Split handlers and server packages
The files were split to help contain bloat. The api/server package will
contain all code related to the functioning of the server while
api/handlers will have all the code related to implementing the end
points.
api/server/register_* will contain the methods for registering
endpoints. Additionally, they will have the comments for generating the
swagger spec file.
See api/handlers/version.go for a small example handler,
api/handlers/containers.go contains much more complex handlers.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
[CI:DOCS]enabled more tests
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]libpod endpoints
small refactor for libpod inclusion and began adding endpoints.
Signed-off-by: baude <bbaude@redhat.com>
Implement /build and /events
* Include crypto libraries for future ssh work
Signed-off-by: Jhon Honce <jhonce@redhat.com>
[CI:DOCS]more image implementations
convert from using for to query structs among other changes including
new endpoints.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]add bindings for golang
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]add volume endpoints for libpod
create, inspect, ls, prune, and rm
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]apiv2 healthcheck enablement
wire up container healthchecks for the api.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]Add mount endpoints
via the api, allow ability to mount a container and list container
mounts.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]Add search endpoint
add search endpoint with golang bindings
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]more apiv2 development
misc population of methods, etc
Signed-off-by: baude <bbaude@redhat.com>
rebase cleanup and epoch reset
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]add more network endpoints
also, add some initial error handling and convenience functions for
standard endpoints.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]use helper funcs for bindings
use the methods developed to make writing bindings less duplicative and
easier to use.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]add return info for prereview
begin to add return info and status codes for errors so that we can
review the apiv2
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]first pass at adding swagger docs for api
Signed-off-by: baude <bbaude@redhat.com>
Podman now supports untagging images via the `untag` sub-command for the
root and `image` commands. Testing and documentation has been added as
well.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
when removing an image from storage, we should return a struct that
details what was untagged vs deleted. this replaces the simple
println's used previously and assists in API development.
Signed-off-by: baude <bbaude@redhat.com>
to make things more effecient for the api work we are doing, we should
process image filters internally (as opposed to in main). this allows
for better api responses and more closely affiliated functions.
Signed-off-by: baude <bbaude@redhat.com>
Return types had to change a bit for this, but since we can wrap
the old v1.ImageConfig, changes are overall not particularly bad.
At present, I believe this only works with commit, not import.
This matches how things were before we changed to the new parsing
so I think this is fine.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This command will destroy all data created via podman.
It will remove containers, images, volumes, pods.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We leverage the containers/storage image history tracking feature to
show the previously used image names when running:
`podman images --history`
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
This path allows pod prune & pod rm to remove stopped containers in the pod before deleting the pod.
PrunePods and RemovePod should be able to remove containers without force removal of stopped pods.
Signed-off-by: Qi Wang <qiwan@redhat.com>
filter option accepts two filters.
- label
- until
label supports "label=value" or "label=key=value" format
until supports all golang compatible time/duration formats.
Signed-off-by: Kunal Kushwaha <kunal.kushwaha@gmail.com>
There were many situations that made exec act funky with input. pipes didn't work as expected, as well as sending input before the shell opened.
Thinking about it, it seemed as though the issues were because of how os.Stdin buffers (it doesn't). Dropping this input had some weird consequences.
Instead, read from os.Stdin as bufio.Reader, allowing the input to buffer before passing it to the container.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Move to containers/image v5 and containers/buildah to v1.11.4.
Replace an equality check with a type assertion when checking for a
docker.ErrUnauthorizedForCredentials in `podman login`.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Everything else is a flag to mount, but "uid" and "gid" are not.
We need to parse them out of "o" and handle them separately.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We need to use the new Inspect() endpoint instead of trying to
JSON the actual volume structs. Currently, the output seems
completely nonsensical; it seems like we're JSONing the struct
for the Varlink connection itself? This should restore sanity and
match the format of remote and local inspect on volumes.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
