This fixes some of our handling of images which have no layers, i.e.,
those whose TopLayer is set to an empty value.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Let's put inspect structs where they're actually being used. We
originally made pkg/inspect to solve circular import issues.
There are no more circular import issues.
Image structs remain for now, I'm focusing on container inspect.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Rework our expectations of how images that are derived from each other
look, so that we don't assume that an image that's derived from a base
image always adds layers relative to that base image.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Add a context.Context parameter to Image.GetParent(), Image.IsParent(),
Image.GetChildren(), Image.Remove(), and Runtime.PruneImages().
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
add the ability for podman to read and write events to journald instead
of just a logfile. This can be controlled in libpod.conf with the
`events_logger` attribute of `journald` or `file`. The default will be
set to `journald`.
Signed-off-by: baude <bbaude@redhat.com>
when deleting a commited image, the path for deletion has an early exit
and the image remove event was not being triggered.
Signed-off-by: baude <bbaude@redhat.com>
Currently in rootless containers, we end up not using the blob cache.
We also don't store the blob cache based on the users specified graph
storage. This change will cause the cache directory to be stored with
the rest of the containe images.
While doing this patch, I found that we had duplicated GetSystemContext in
two places in libpod. I cleaned this up.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In lipod, we now log major events that occurr. These events
can be displayed using the `podman events` command. Each
event contains:
* Type (container, image, volume, pod...)
* Status (create, rm, stop, kill, ....)
* Timestamp in RFC3339Nano format
* Name (if applicable)
* Image (if applicable)
The format of the event and the varlink endpoint are to not
be considered stable until cockpit has done its enablement.
Signed-off-by: baude <bbaude@redhat.com>
Add the ability to manually run a container's healthcheck command.
This is only the first phase of implementing the healthcheck.
Subsequent pull requests will deal with the exposing the results and
history of healthchecks as well as the scheduling.
Signed-off-by: baude <bbaude@redhat.com>
To get the more-robust handling from 0f6535cf (libpod/image: Use
ParseNormalizedNamed in RepoDigests, 2019-01-08, #2106) here too.
Signed-off-by: W. Trevor King <wking@tremily.us>
The toolbox project would benefit from a few changes to more closely
resembe the original atomic cli project. Changes made are:
* only pull image for container runlabel if the label exists in the image
* if a container image does not have the desired label, exit with non-zero
Signed-off-by: baude <bbaude@redhat.com>
Image.MatchRepoTag and findImageInRepoTags do some kind of
heuristic search; the motivation and design of both, and how they
should deal with digests, is not obvious to me.
Instead of figuring that out now, just factor it out into a
scary-named method and leave the "tag" value (with its "latest"/"none"
value) alone.
Similarly, the .registry and .name fields should typically not be used;
users should use either hasRegistry or normalized reference types;
so, isolate the difficult-to-understand search code, and computation
of these values, into this new search-specific helper.
Should not change behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
imageruntime.getImage, through ParseStoreReference, already uses
reference.TagNameOnly on the input, so this extra lookup is completely
redundant to the lookup that has already happened.
Should not change behavior, apart from speeding up the code a bit.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Instead of returning a string, return a native value and convert it
into the string in the caller, to make it that small bit more
common to use reference types.
Should not change behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Again, rely on the official API, instead of the suprising "suspiciousTagValueForSearch"
value (set to :latest on untagged images, and :none on digested ones!)
CHANGES BEHAVIOR, but the previous output of normalization of digested values was
not even syntatically valid, so this can't really be worse.
Still, maybe we should refuse to tag with digested references in the first place.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
This is another step to using reference values instead of strings here.
CHANGES BEHAVIOR: docker.io/busybox is now normalized to docker.io/library/busybox.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
... instead of open-coding something similar. Eventually
we will use the reference type further in here.
Should not change behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Now that DecomposeString has no users, make the type private again.
Any new users of it should come with a rationale - and new users
of the "none"/"latest" handling of untagged/digested names that is
currently implemented should have an exceptionaly unusual rationale.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Avoid generating
quay.io/openshift-release-dev/ocp-release@sha256@sha256:239... and
similar when the image name is already digest-based [1]. It's not
clear exactly how we get into this state, but as shown by the unit
tests, the new code handles this case correctly (while the previous
code does not).
[1]: https://github.com/containers/libpod/issues/2086
Signed-off-by: W. Trevor King <wking@tremily.us>
Closes: #2106
Approved by: rhatdan
DockerRegistryOptions.DockerInsecureSkipTLSVerify as an types.OptionalBool
can now represent that value, so forceSecure is redundant.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
DockerRegistryOptions.DockerInsecureSkipTLSVerify as an types.OptionalBool
can now represent that value, so forceSecure is redundant.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Following SystemContext.DockerInsecureSkipTLSVerify, make the
DockerRegistryOne also an OptionalBool, and update callers.
Explicitly document that --tls-verify=true and --tls-verify unset
have different behavior in those commands where the behavior changed
(or where it hasn't changed but the documentation needed updating).
Also make the --tls-verify man page sections a tiny bit more consistent
throughout.
This is a minimal fix, without changing the existing "--tls-verify=true"
paths nor existing manual insecure registry lookups.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Add an exists subcommand to podman container and podman image that allows
users to verify the existence of a container or image by ID or name. The return
code can be 0 (success), 1 (failed to find), or 125 (failed to work with runtime).
Issue #1845
Signed-off-by: baude <bbaude@redhat.com>
Execute the command as described by a container image. The value of the label is processed
into a command by:
1. Ensuring the first argument of the command is podman.
2. Substituting any variables with those defined by the environment or otherwise.
If no label exists in the container image, nothing is done.
podman container runlabel LABEL IMAGE extra_args
Signed-off-by: baude <bbaude@redhat.com>
In cases where the image name is more complex like:
quay/baude/alpine_nginx:latest and is not from the docker
registry, we need to be able to run the image by its shortname
such as baude/alpine_nginx. The same goes when the image is
not from a registry but instead has the localhost repository.
This resolves buildah issue #1034
Signed-off-by: baude <bbaude@redhat.com>
Need to get some small changes into libpod to pull back into buildah
to complete buildah transition.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1270
Approved by: mheon
...and some naming decisions.
This change ensures podman save doesn't incorrectly prepend localhost when saving an image.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1140
Approved by: rhatdan
This is similar to the PushImageToHeuristicDestination RFC.
The goal is to be very explicit about which functions try to heuristically
guess what is the expected format of the string. Not quite "shaming"
the users, but making sure they stand out.
RFC:
- Is this at all acceptable? Desirable?
Should not change behavior (but does not add unit tests).
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Closes: #1176
Approved by: rhatdan
FINALLY, (podman load) can pass through an ImageReference directly from
loadCmd all the way to pullGoalNamesFromImageReference, making sure not
to trigger the docker-like reference parsing heuristics.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Closes: #1176
Approved by: rhatdan
All callers of LoadFromArchive expect the input to be in the
transport:name format, or create it that way. So, pass a
types.ImageReference instead of a string.
That requires us to add an explicit parse step in (podman pull);
in (podman load) we can, instead of pasting strings, create
native objects directly.
Changes the error behavior of (podman pull), we no longer
try heuristically parsing docker-archive:... inputs as
Docker references.
Also changes the string reported by (podman load) if all parsing
attempts fail, to be only the path instead of dir:path. The error
message itself is likely to be the same (from directory.Transport).
(While at it, update a mismatched comment.)
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Closes: #1176
Approved by: rhatdan
Use the parent types.SystemContext data instead.
Should not change behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Closes: #1176
Approved by: rhatdan
Use the parent types.SystemContext data instead.
Should not change behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Closes: #1176
Approved by: rhatdan
