This test was added twice once for CNI and netavark, just write it once
there is no need to do this weird skip thing.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Allow users to customize the network_interface option is the network
config. For bridge this allows users to change the bridge name and for
maclvan it will be the same as `--opt parent=...`.
However the main reason for this option is to allow netavark plugins to
make use of it. I demoed the host-device plugin which makes use of this
as an example. While we could let users set them via --opt it is more
natural to just use the field which is designed for that purpose.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Wait for the expected logs to appear in the journal before using
`journalctl`. #18132 is likely flaking because `journalctl` does
not yet see the container's logs.
Also force the test to use the `passthrough` log driver to make sure
`podman logs` continues being tests.
Fixes: #18132
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Use the kube_generate_type from the containers.conf as
the default value for the --type flag for kube generate.
Override the default when userexplicitly sets the --type
flag.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
If resource limits is not set, do not display the following warning message:
`Resource limits are not supported and ignored on cgroups V1 rootless systems`
Ref: #17582
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Currently --tmpdir changes the location of the pause.pid file. this
causes issues because the c code in pkg/rootless does not know about
that. I tried to fix this[1] by fixing the c code to not use the
shortcut. While this fix worked it will result in many pause processes
leaking in the integrration tests.
Commit ab88632 added this behavior but following the disccusion it was
never the intention that we end up having more than one pause process.
The issues that was trying to fix was caused by somthing else AFAICT,
the main problem seems to be that the pause.pid file parent directory
may not be created when we try to create the pid file so it failed with
ENOENT. This patch fixes it by creating this directory always and revert
the change to no longer depend on the tmpdir value.
With this commit we now always use XDG_RUNTIME_DIR/libpod/tmp/pause.pid
for all podman processes. This allows the c shortcut to work reliably
and should therefore improve perfomance over my other approach.
A system test is added to ensure we see the right behavior and that
podman system migrate actually stops the pause process. Thanks to Ed
Santiago for the improved test to make it work for both `catatonit` and
`podman pause`.
This should fix the issues with namespace missmatches that we can see in
CI as flakes.
[1] https://github.com/containers/podman/pull/18057Fixes#18057
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Bump containers/(storage, common, buildah and image)
Changes since 2023-01-01:
- skip mount-cache-selinux-long-name test under remote, with
a FIXME requesting that someone see if it can be made to work.
- skip six tests that fail under rootless-remote
- add new --build-arg-file option:
- update man page
Squash of:
* cf56eb1865
* 561f082772
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Aditya R <arajan@redhat.com>
The `UserNS` key will replace the `RemapGid`, `RemapUid`, `RemapUidSize`
and `RemapUsers` options which are therefore marked as deprecated by
this commit.
Closes#17984
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
The "podman pull by digest and list --all" e2e test pulls an image using
a tagged reference when an image with the same ID is already present in
a read-only additional image store.
This causes a new image record to be created in read-write storage.
The test then removes this entry, pulls the image again using a digested
reference, and then expects the image to not have any tagged names in it
when it goes to look at it again.
Newer containers/storage will ensure that at the point when the
read-write image record is created, that it includes all of the data
items and naming information from the read-only copy of the image, so
that this information doesn't appear to be lost.
Change the test to use "untag" instead of "rmi", which should pass with
either the older or newer containers/storage.
The test is checking that `podman images` doesn't choke when it
encounters a digested name attached to an image, so the difference in
behavior between containers/storage versions is irrelevant.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Since commit f250560a80 the play kube command uses its own network.
this is racy be design because we create the network followed by
creating/running pod/containers. This means in the meantime another
prune or reset process could wipe out the network config because we have
to share the network config directory by design in the test.
The problem is we only have one host netns which is shared between
tests. If the network config dir is not shared we cannot make conflict
checks for interface names and ip address. This results in different
tests trying to use the same interface and/or ip address which will
cause runtime failures in CNI and netavark.
The only solution I see is to make sure only the reset/prune tests are
using a custom network dir. This makes sure they do not wipe configs
that are otherwise required by other parallel running tests.
Fixes#17946
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
At the time of making this commit, the package `github.com/ghodss/yaml`
is no longer actively maintained.
`sigs.k8s.io/yaml` is a permanent fork of `ghodss/yaml` and is actively
maintained by Kubernetes SIG.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Kube generate on pods was not checking for any underscores
in the pod name so was creating a kube yaml with an invalid
pod name when there were underscores present.
The hostname for the pod is set to the podname by default. There
is no need to set that to the container's name or the pod name
again in the generated yaml. So removed that field unless a hostname
was set for the container by the user.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
...mostly just test code that wasn't doing the required waits.
My first approach in the kube-play test was to add "--wait".
Bit mistake! The --wait flag, counterintuitively and counter to
documentation, actually destroys all pods+containers+everything
on exit. (Or tries -- see #17803). Since this violates POLA
and is undocumented, I include here a fix to the man page.
Despite my best intentions, I can't reasonably check every single
test for missing waits, especially in kube-play where failing
containers will get retried forever so we can't wait. We'll
just have to fix flakes as we see them.
Fixes: #17958Fixes: #18071
Signed-off-by: Ed Santiago <santiago@redhat.com>
Test has been flaking. Reason: container was run with -d, so
there's a small window in which podman-healthcheck ran on
a running container. Solution: remove -d
Signed-off-by: Ed Santiago <santiago@redhat.com>
Check the DELETE reports for both deletes. #18041 indicates that the
pod hasn't been removed which made me suspicious about the 1st delete.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
I recently wanted to check which version of Quadlet I was using and
found a `-version` flag to be missing. Since Quadlet and Podman are
bundled together, it seems reasonable to me for them to share the same
version.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This commit adds an quadlet option `Tmpfs` which can be used to mount a
tmpfs in the container.
Closes#17907
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
One of our oldest most frustrating flakes is #16091, "Timed
out waiting for BYE".
In #17489 we added some debug output to see if the problem
was a container hang of some sort. It does not seem to be
(see #17675), and the debug output makes it hard to read
failure logs, so let's remove it.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add the command along with the abi and tunnel support
Add e2e tests
Add man page
Add apiv2 test to ensure return codes
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
add a function to securely mount a subpath inside a volume. We cannot
trust that the subpath is safe since it is beneath a volume that could
be controlled by a separate container. To avoid TOCTOU races between
when we check the subpath and when the OCI runtime mounts it, we open
the subpath, validate it, bind mount to a temporary directory and use
it instead of the original path.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The podman kube generate command can now generate a
Deployment kind when the --ype flag is set to deployment.
By default, a Pod spec will be generated if --type flag is
not set.
Add --replicas flag to kube generate to allow users to set
the value of replicas in the generated yaml when generating a
Deployment kind.
Add e2e and minikube tests for this feature.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
If the kube yaml volumes has secret.items set, then use
the values from that to set up the paths inside the container
similar to what we do for configMap.
Add tests for this as well.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
As found in #17828, image listing does not scale well with a growing
number of local images. Make use of recent improvements in libimage
that allow for computing the dangling and parent data with _one_ layer
tree. Prior, the layer tree had to be recomputed _twice_ for each
image.
[NO NEW TESTS NEEDED] as it's a non-functional performance change.
Fixes: #17828
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
By default go will not keep the stdout/err attach when executing
commands via exec.Command(). It is required to explicitly pass the
current stdout/err fds down to the child so we can see the error output
in the logs to debug #17966.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
