Podman does not relay exit code from buildah instead returns a generic
error code `125`. Following PR allows `podman` to relay exit code from
`imagebuildah` to `registry` as it is.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
when a container with healthchecks exits due to stopping or failure, we
need the cleanup process to remove both the timer file and the service
file.
Bz#:2024229
Signed-off-by: Brent Baude <bbaude@redhat.com>
Make sure that `kill -a` is printing the IDs of killed containers.
Previously, it was only printing empty lines.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The search endpoint on registry.redhat.io is broken.
Skip one test and update another to avoid hitting it.
Also leave some breadcrumbs to revert once it's back
in a working state.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
(i.e. not test failures, but actual programming bugs).
We've had a number of syntax errors creep into this test, usually
caused by a missing backslash on a test command. I've long wanted
to 'set -e' but that causes other problems. This PR introduces
error handling via 'trap', with useful diagnostics on failure.
This PR also catches and fixes two previously-unknown bugs that
were causing tests to not actually run.
And, since /events takes eons on my high-uptime laptop, add /since
Signed-off-by: Ed Santiago <santiago@redhat.com>
We currently do not show --external containers when the user specifies
it, unless they also specify the --all flag. This has led to confusion.
I see no reason not to list them without the --all flag if the user
specifies the option.
Fixes: https://github.com/containers/podman/issues/12353
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Some months ago, apiv2 tests got added that needed new
functionality: passing a tarball to the remote server.
There was no mechanism to do so in the 't' helper, so
these tests used complicated (and actually not-really-
working) curl commands.
This PR introduces and documents a new usage of 't', in
which passing an argument ending in '.tar' adds the
right magic syntax (--data-binary @PATH) to the existing
curl. This lets us use all standard 't' checks, making
for simpler tests and in the process fixing some bugs.
Also: drive-by fix of a typo bug in the networks test.
Also: set CONTAINERS_REGISTRIES_CONF when starting server
and when running direct podman, to avoid docker.io throttling.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Network connect now supports setting a static ipv4, ipv6 and mac address
for the container network. The options are added to the cli and api.
Fixes#9883
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The new network backend stores the networks in a map so the returned
order is not deterministic. Lets sort the network names alphabetically
to ensure a deterministic order.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is the third and hopefully the last attempt to address the flakes
in the pprof tests. We first bumped the timeouts to 2 seconds, then to
5, and since I am running out of ideas let's bump it now to 20 seconds.
Since the timeouts poll, the tests will terminate much earlier but 20
seconds should now really be enough even under highly loaded CI VMs.
Fixes: #12167
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
I noticed that this test will fail its flake rerun because the network
was not removed and it tried to create a network with the same name.
Also network disconnect works rootless now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This gives the service 5 seconds to digest the signal and 5 more seconds
to shutdown. Create a new variable to make bumping the timeout easier
in case we see re-flake in the future.
Fixes: #12167
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2030599
When you create pod, it shares the UTS namespace with Containers.
Currently the --hostname is not passed to the pod created when
you create a container and pod in the same command.
Also fix error message on supported --share flags
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
...it's not needed: teardown() already does it. Or, it would,
if it had been updated to deal with the new pause image naming
convention, which I've just done.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Users should be able to override containers entrypoint using
`--entrypoint ""` following works fine for podman but not for podman
remote.
Specgen ignores empty argument for entrypoint so make specgen honor
empty arguments.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
GLOBAL_OPTS haven't been supported for at least two major versions of
Podman. The runlabel code is extremely fragile and I think it should
be rewritten before adding new features.
Fixes: #12436
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
While trying to match permissions of target directory podman adds
extra `0111` which should not be needed if target path does not have
execute permission.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
e2e tests:
* remove two FIXMEs:
* one of them is expected behavior, not a FIXME
* the other is easily fixed
* File issue #12521 for a real podman-remote bug, and
update the Skip() message
system tests:
* in command-completion test, clean up stray podman-pause image
(followup to #12322, in which I missed this instance). This
removes distracting warnings from test logs.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fix the flake reported in #9597 with a workaround to at least stop
wasting energy until the root cause has been found and fixed.
It seems that a remote run returns before the container has transitioned
into the `exited` state which ultimately breaks a subsequent remote
start with attach.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Give the services some more time after SIGINT to shutdown.
`Eventually(session, 5)` will poll the session for the specific
condition at a frequency of 10ms for at most 5 seconds.
Fixes: #12167
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Update the `--filter reference=...` tests to reflect recent changes in
c/common. The reference values now match as specified without
implicitly adding wildcards arounds.
Fixes: #11905
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
[NO NEW TESTS NEEDED]
Support better compatibility output for podman system commands
* Format and content of output from podman version changed to
be more compatible
See #10974
Depends on containers/common#831
Signed-off-by: Jhon Honce <jhonce@redhat.com>
If the k8s yaml has volumes from a configmap, play kube
will now create a volume based on the data from the
configmap and volume source and set it to the right path
in the container accordingly.
Add tests for this and update some test for ENV from configmap.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
