'make docs' has been spitting out these warnings:
WARNING: go-md2man does not handle node type HTMLSpan
Warnings suck, they cost us important time and attention.
This warning is always caused by left-angle-brackets in markdown
but they are very hard to find. I've found them and fixed them.
Warnings are now gone.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When no name arg is given to Podman machine commands, Podman assumes the machine name is podman-machine-default. Document this behavior.
Signed-off-by: Ashley Cui <acui@redhat.com>
The `--network-cmd-path` CLI option only affects rootless networks using `slirp4netns(1)`, not `pasta(1)`. Following #18568 Podman should rather use the more generic `r.config.FindHelperBinary()` method (and therefore honour the `helper_binaries_dir` config) to find the path to the `slirp4netns` binary and deprecate the misleading `--network-cmd-path` CLI option. However, since this wasn't implemented yet we can't deprecate `--network-cmd-path` as of now. Adding a note anyway.
Fixes#18560
Signed-off-by: Daniel Rudolf <github.com@daniel-rudolf.de>
Read the entire YAML file in case of a multi-doc file
Adjust the unit test
Add a system test
Add comment in the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
If there's a container defined in multiple directories use the following
precedence:
$XDG_CONFIG_HOME/containers/systemd/ or ~/.config/containers/systemd/
takes precedence over /etc/containers/systemd/users/$(UID) and this
takes precedence over /etc/containers/systemd/users/
Signed-off-by: Petr Lautrbach <lautrbach@redhat.com>
I would like to allow admin to control quadlet containers
in users homedirs.
If an admin sets a quadlet in
/etc/containers/systemd/users, then all users will run these
quadlet services when they login.
If an admin places a quadlet in /etc/containers/systemd/users/$(USERNAME)
then only the USERNAME will execute this quadlet service when
they login.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add Restarts column to the podman pod ps output to show the total number
of times the containers in a pod were restarted. This is the same as the
restarts column displayed by kubernetes with kubectl get pods. This will
only be displayed when --format={{.Restarts}}.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add Restarts column to the podman ps output to show how many times a
container was restarted based on its restart policy. This column will be
displayed when --format={{.Restarts}}.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add --restart flag to pod create to allow users to set the
restart policy for the pod, which applies to all the containers
in the pod. This reuses the restart policy already there for
containers and has the same restart policy options.
Add "never" to the restart policy options to match k8s syntax.
It is a synonym for "no" and does the exact same thing where the
containers are not restarted once exited.
Only the containers that have exited will be restarted based on the
restart policy, running containers will not be restarted when an exited
container is restarted in the same pod (same as is done in k8s).
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Systemd supports unit files with a prefix '-' which
tells the system to check if the content exists before
using it. This would allow the QM project to specify
AddDevice=-/dev/kvm, which would add the /dev/kvm device
to the container iff it exists on the host.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Found a typo today while reading documentation.
Simple enough change :-)
Signed-off-by: Mike Eisemann <me@michaeleisemann.com>
Signed-off-by: AndroidKitKat <me@michaeleisemann.com>
system reset it says it will delete containers, images, networks, etc...
However it will also delete the graphRoot and runRoot directories.
Normally this is not an issue, however in same cases these directories
were set to the users home directory or some other important system
directory.
As first step simply show the directories that are configured and thus
will be deleted by reset. As future step we could implement some
safeguard will will not delete some known important directories however
I tried to keep it simple for now.
[NO NEW TESTS NEEDED]
see #18349 and #18295
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Highlight that existing user and system services may be overridden if
they have same name as the Quadlet file. Also point the user to
systemctl and how to list existing files.
Closes: #18275
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Wire in support for writing the digest of the pushed image to a
user-specified file. Requires some massaging of _internal_ APIs
and the extension of the push endpoint to integrate the raw manifest
(i.e., in bytes) in the stream.
Closes: #18216
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Update e2e tests not to expect the flag
System tests - explicitly set the log driver to be able to parse the output
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
- add information about netavark plugins
- add missing arguments to options the require an arg
- document that container dns is only supported with bridge
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Allow users to customize the network_interface option is the network
config. For bridge this allows users to change the bridge name and for
maclvan it will be the same as `--opt parent=...`.
However the main reason for this option is to allow netavark plugins to
make use of it. I demoed the host-device plugin which makes use of this
as an example. While we could let users set them via --opt it is more
natural to just use the field which is designed for that purpose.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Bump containers/(storage, common, buildah and image)
Changes since 2023-01-01:
- skip mount-cache-selinux-long-name test under remote, with
a FIXME requesting that someone see if it can be made to work.
- skip six tests that fail under rootless-remote
- add new --build-arg-file option:
- update man page
Squash of:
* cf56eb1865
* 561f082772
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Aditya R <arajan@redhat.com>
The `UserNS` key will replace the `RemapGid`, `RemapUid`, `RemapUidSize`
and `RemapUsers` options which are therefore marked as deprecated by
this commit.
Closes#17984
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
...mostly just test code that wasn't doing the required waits.
My first approach in the kube-play test was to add "--wait".
Bit mistake! The --wait flag, counterintuitively and counter to
documentation, actually destroys all pods+containers+everything
on exit. (Or tries -- see #17803). Since this violates POLA
and is undocumented, I include here a fix to the man page.
Despite my best intentions, I can't reasonably check every single
test for missing waits, especially in kube-play where failing
containers will get retried forever so we can't wait. We'll
just have to fix flakes as we see them.
Fixes: #17958Fixes: #18071
Signed-off-by: Ed Santiago <santiago@redhat.com>
Mention that specified credentials are only used to authenticate against
target registries (e.g., during `pull` or `build`) and are not used to
authenticat against mirrors etc.
Closes: #17185
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This commit adds an quadlet option `Tmpfs` which can be used to mount a
tmpfs in the container.
Closes#17907
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Add the command along with the abi and tunnel support
Add e2e tests
Add man page
Add apiv2 test to ensure return codes
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
The podman kube generate command can now generate a
Deployment kind when the --ype flag is set to deployment.
By default, a Pod spec will be generated if --type flag is
not set.
Add --replicas flag to kube generate to allow users to set
the value of replicas in the generated yaml when generating a
Deployment kind.
Add e2e and minikube tests for this feature.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
