`podman system service` + TCP is not a configuration we should be
recommending. There was already language about this in the
manpages, but it was not sufficient in explaining how bad of an
idea this is. Expand the manpage warnings, add a dedicated
heading so people notice, and add a warning every time the
service starts with a TCP URL that directs people to the manpage
to see that explanation.
Signed-off-by: Matt Heon <mheon@redhat.com>
Some quadlet tests are failing on RHEL8: test code was
using journalctl to check output from containers. This
fails on RHEL8, where default log driver is k8s-file.
Solution: use 'podman logs' instead. To do so, we need to
keep the containers alive (otherwise, quadlet seems to
delete them on exit). Do so by running 'top -b' (batch);
the currently-used 'top' was failing because not-a-tty.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add key for Quadlet to set WorkingDirectory to the directory of the YAML or Unit file
Add Doc
Add E2E tests
Add System test
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
quadlet volume-path system test was making invalid assumptions
about $TMPDIR, causing test to fail when TMPDIR=/var/tmp or /dev/shm
Much more complicated than it should be, because we need to
find out the systemd value of %T.
Minor cleanup too.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Adds support for `since` as a valid filter option for `podman volume ls`
and `podman volume prune`.
Implements: #19228
Initially suggested from: #19119
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Fixes a bug where `podman volume ls` with multiple `label` filters would
return volumes that matched *any* of the filters, not *all* of them.
Adapts generating volume filter functions to be more in
line with how it is done for containers and pods.
Fixes: #19219
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Adds any required "wiring" to ensure the reserved annotations are supported by
`podman kube play`.
Addtionally fixes a bug where, when inspected, containers created using
the `--publish-all` flag had a field `.HostConfig.PublishAllPorts` whose
value was only evaluated as `false`.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
- the "podman {run,exec} /etc" test: runc now spits out
"is a directory" instead of "permission denied". And,
on exec, exits 255 instead of 126. Deal with it.
- workaround for https://github.com/containers/skopeo/issues/823
(skopeo XDG bug): always make sure XDG is defined for skopeo
Signed-off-by: Ed Santiago <santiago@redhat.com>
Adds an `--podman-only` flag to `podman generate kube` to allow for
reserved annotations to be included in the generated YAML file.
Associated with: #19102
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
To silence my find-obsolete-skips script, remove the '#'
from the following issues in skip messages:
#11784#15013#15025#17433#17436#17456
Also update the messages to reflect the fact that the issues
will never be fixed.
Also remove ubuntu skips: we no longer test ubuntu.
Also remove one buildah skip that is no longer applicable:
Fixes: #17520
Signed-off-by: Ed Santiago <santiago@redhat.com>
When I reworked pod removal to provide more detailed errors
(including per-container errors, not just a single multierror
with all errors squashed), I made it part of the struct returned
by the REST API and assumed that would be enough to get errors
through to clients. Unfortunately, in case of an overarching
error removing the pod (as any error with any container would
cause), we don't send the response struct that would include the
container errors - we just send a standardized REST error. We
could work around this with custom, potentially backwards
incompatible error handling for the REST pod delete endpoint, or
we could just do what was done before, and package up all the
errors in a multierror to send to the other side. Of those
options, the multierror seems far simpler.
Fixes#19159
Signed-off-by: Matt Heon <mheon@redhat.com>
The change to use the custom dns server in aardvark-dns caused a
regression here because macvlan networks never returned the nameservers
in netavark and it also does not make sense to do so.
Instead check here if we got any network nameservers, if not we then use
the ones from the config if set otherwise fallback to host servers.
Fixes#19169
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We use the name as alias but using the hostname makes also sense and
this is what docker does. We have to keep the short id as well for
docker compat.
While adding some tests I removed some duplicated tests that were
executed twice for nv for no reason.
Fixes#17370
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When fetching the user name, you need to use User.Username
instead of User.Name, as with other tests.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Adds a `--no-trunc` flag to `podman kube generate` preventing the
annotations from being trimmed at 63 characters. However, due to
the fact the annotations will not be trimmed, any annotation that is
longer than 63 characters means this YAML will no longer be Kubernetes
compatible. However, these YAML files can still be used with `podman
kube play` due to the addition of the new flag below.
Adds a `--no-trunc` flag to `podman kube play` supporting YAML files with
annotations that were not truncated to the Kubernetes maximum length of
63 characters.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
This commit extends `Volume` and `Network` unit definitions with two
additional parameters, `VolumeName` and `NetworkName`, which will,
respectively, set a user-defined name for the corresponding volume and
network. This is similar to how the `ContainerName` directive currently
works, and should allow for smoother transitions to Quadlet-managed
resources.
Closes: #19003
Signed-off-by: Alex Palaistras <alex@deuill.org>
...from the test name. Eliminates scary duplication.
Followup to #19053: instead of cross-checking pasta test args
against test name, eliminate the args entirely. Determine
them all from the @test name itself.
Example:
"TCP translated port range forwarding, IPv4, loopback"
| | | | | | +-- iftype=loopback
| | | | | +-------- ip_ver=4
| | | | +-------------------- bytes=1
| | | +-------------------------- range=3
| | +------------------------------- (ignored)
| +------------------------------------------ delta=1
+--------------------------------------------- proto=tcp
Signed-off-by: Ed Santiago <santiago@redhat.com>
Do not use podman info/version as they are expensive and clutter the log
for no reason. Just checking if we can connect to the socket should be
good enough and much faster.
Fix the non existing error checking, so that we actually see an useful
error when this does not work.
Also change the interval, why wait 2s for a retry lets take 100ms steps
instead.
Fixes#19010
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Previous tests have worked by pure chance since the client and server
ran on the same host; the server picked up the credentials created by
the client login.
Extend the gating tests and add a new integration test which is further
capable of exercising the remote code.
Note that fixing authentication support requires adding a new
`--authfile` CLi flag to `manifest inspect`. This will at least allow
for passing an authfile to be bindings. Username and password are not
yet supported.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This ended up more complicated then expected. Lets start first with the
problem to show why I am doing this:
Currently we simply execute ps(1) in the container. This has some
drawbacks. First, obviously you need to have ps(1) in the container
image. That is no always the case especially in small images. Second,
even if you do it will often be only busybox's ps which supports far
less options.
Now we also have psgo which is used by default but that only supports a
small subset of ps(1) options. Implementing all options there is way to
much work.
Docker on the other hand executes ps(1) directly on the host and tries
to filter pids with `-q` an option which is not supported by busybox's
ps and conflicts with other ps(1) arguments. That means they fall back
to full ps(1) on the host and then filter based on the pid in the
output. This is kinda ugly and fails short because users can modify the
ps output and it may not even include the pid in the output which causes
an error.
So every solution has a different drawback, but what if we can combine
them somehow?! This commit tries exactly that.
We use ps(1) from the host and execute that in the container's pid
namespace.
There are some security concerns that must be addressed:
- mount the executable paths for ps and podman itself readonly to
prevent the container from overwriting it via /proc/self/exe.
- set NO_NEW_PRIVS, SET_DUMPABLE and PDEATHSIG
- close all non std fds to prevent leaking files in that the caller had
open
- unset all environment variables to not leak any into the contianer
Technically this could be a breaking change if somebody does not
have ps on the host and only in the container but I find that very
unlikely, we still have the exec in container fallback.
Because this can be insecure when the contianer has CAP_SYS_PTRACE we
still only use the podman exec version in that case.
This updates the docs accordingly, note that podman pod top never falls
back to executing ps in the container as this makes no sense with
multiple containers so I fixed the docs there as well.
Fixes#19001
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2215572
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
