Tremendous amount of changes in here, but all should amount to
the same thing: changing Go import paths from v5 to v6.
Also bumped go.mod to github.com/containers/podman/v6 and updated
version to v6.0.0-dev.
Signed-off-by: Matt Heon <mheon@redhat.com>
Problem: While removing cgroupsv1 code, I noticed my neovim Go config
automatically changed fileperms to the new octal format and I didn't
want that polluting my diffs.
Decision: I thought it best to switch to the new octal format in a dedicated PR.
Action:
- Cursor switched to new octal format for all fileperm ocurrences in Go
source and test files.
- vendor/, docs/ and non-Go files were ignored.
- Reviewed manually.
Ref: https://go.dev/ref/spec#Go_1.13
Signed-off-by: Lokesh Mandvekar <lsm5@redhat.com>
this patch changes how the detection of wsl works.
The old way of using wsl --status command output to detect some missing features required by WSL is not fully reliable.
WSL checks if the wsl feature is enabled and if the vmcompute service do exist. However, this is not enough to identify if the virtual machine platform feature is enabled. The vmcompute service could exist because it has been installed by other tools or it could exist but being stopped.
The way proposed by this patch is to try execute the import command and,
if it fails, check the error and if it is related to the Host Compute
Service try to install all features required by WSL.
The flow is the same as before, the user is asked to execute the podman
machine init command with elevated privileges. Eventually, after
enabling WSL and VMP features, the user is asked to reboot the machine.
When the machine restarts, the powershell gets invoked again and execute
the command init.
The code also fixes some issues that could cause misbehaviors when
invoking recursively the elevated shell, like an unreleased lock, or a
missing file.
Signed-off-by: lstocchi <lstocchi@redhat.com>
There is no reason to deifne a dummy service to run sleep just to get
the podman.socket enabled. Enabeling a service is just creating the
symlink so we can do that for the user sessions as well.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Allow the user to provide an Ansible playbook file on init which will
then be run on boot.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Signed-off-by: Brent Baude <bbaude@redhat.com>
First of some commands ignored cmd.Wait() error which means it was
impossible to notice any command errors. And others only returned
the wait error as it which when a command fails is just
`exit status <code>` which is not helpful at all.
This commit should add proper error wrapping with stderr to get useful
strings back hopefully.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
creating vsocks in windows requires admin privileges. there could be
some workarounds made in the future,but the general deal has
always been, you need to be admin. lets enforce this with an error
until those work-arounds can be implemented.
Signed-off-by: Brent Baude <bbaude@redhat.com>
- Fixes conflicts such as removal of second machine deleting a socket of a
the first machine while it's running
- Move API socket into runtime directory for consistency
- Add API and gvproxy sockets to removal list
- Cleanup related logic
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Copy all proxy envs into the VM on each start, this allows for updates
without having to recrate the VM. This is implemented via shell script
that is passed via ssh to the VM after it is started.
With that we now use the same logic for all providers the old fw_cfg
logic for qemu has been removed and the WSL code as well which keeps the
behavior the same.
There is a small risk now because we only update the env via ssh that
processes started before will have the old incorrect env but it should
really only effect core system processes which likely do not need them
anyway. The podman system service should not be started at this point
so it should be good enough.
It also fixes the broken behavior with SSL_CERT_FILE/SSL_CERT_DIR which
were updated on each start which is not correct as the files are only
copied with ignition so these should not be updated and just set
statically when the VM was created.
e2e test has been added to ensure the behavior works as expected.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Works around a problem where recent Windows updates do not always redirect the
system wsl to the app store wsl version correctly.
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Also addresses a number of issues:
- StopHostNetworking isn't plumbed, win-sshproxy leaks on hyperv
- Wait api and print output doesn't work properly on Windows
- API forwarding doesn't work on WSL
- Terminal corruption with after start/stop on Windows
- Gvproxy is forcefully killed vs gracefully quit
- Switching rootful/rootless does not update /var/run/docker.sock on the guest
- File already closed error on init
- HyperV backend is publishing Unix sockets when it should be named pipes
- User-mode networking doesn't always work
- Stop state outside of lock boundaries
- WSL blocks parallel machined (should be supported)
[NO NEW TESTS NEEDED]
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Sets up USB passthrough for machine. Additionally moves `SetOptions` out
from `pkg/machine/config.go` to its own file in
`pkg/machine/define/setopts.go`.
[NO NEW TESTS NEEDED]
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
The following PR is the leading PR for refactoring podman machine with
the following goals:
* less duplication/more re-use
* common configuration file between providers
* more consistentency in how machines are handled by providers
The goal of this PR is the rough refactor. There are still rough spots
for sure, specifically around the podman socket and pipe. This
implemention is only for Linux. All other providers are still present
but will not compile or work. This is why tests for them have been
temporarily suspended.
The ready socket code is another area that needs to be smoothed over.
Right now, the ready socket code is still in QEMU. Preferably it would
be moved to a generic spot where all three approaches to readiness
socket use can be defined.
It should also be noted:
* all machine related tests pass.
* make validate for Linux passes
* Apple QEMU was largely removed
* More code pruning is possible; will become clearer when other
providers are complete.
the dir pkg/machine/p5 is not permanent. i had to seperate this from
machine initially due to circular import problems. i think when all
providers are done (or nearly done), it can be placed and named
properly.
Signed-off-by: Brent Baude <bbaude@redhat.com>
this is a logical place to get changes upstream before they grow out of
control. this pr is the first in an effort to deduplicate machine code
and streamline code flow.
a lot of code is simply moved to eliminate circular imports. names and
specific paths can ultimately be changed. i dont like some of the
descriptive interface names, etc. ultimately, i think once we have the
"old" code sanitized, we can re-use some of those.
clearly some of what is in here is temporary and will either be deleted,
changed, or moved again as this effort comes to a close.
right now, the machine code does not use any of the "new" code. you
will see in `init` and `rm` some commented out code that hooks it. i'm
afraid things will get worse before they get better (way worse).
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Provides Docker API client access, allowing compose to work by default
for HyperV. Basically the HyperV equiv of the work done here by #12916.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
We shouldn't hardcode `~/.local` - we should use the internal
config helper APIs which honor the XDG_DATA_DIR etc. standard
environment variables.
Signed-off-by: Colin Walters <walters@verbum.org>
Changes SSH key behavior such that there is a single persisted key for all
machines across all providers. If there is no key that is located at
`.local/share/containers/podman/machine/` then it is created. The keys are
not deleted when the last machine on the host is removed.
The main motivation for this change is it leads to fewer files created on the
host as a result of vm configuration. Having `n` machines on your system doesn't
result in `2n` machine-related files in `.ssh` on your system anymore.
As a result of ssh keys being persisted by default, the `--save-keys` flag
on `podman machine rm` will no longer be supported.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Moves all of the ignitionfiles out of the `machine` package and into
its own called `ignition`. This required `VMType` to get moved out of
the `machine` package and into the `define` package in order to prevent
a circular dependency.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
The following PR is the very first step in what will a series of steps
to apply a "common" machine configuration file to all providers.
Function names, method names, struct names, and field names are all up
for debate. The purpose of this PR is to offer a glimpse at the
direction we intend to take.
This PR also contains temporary structs (i.e. aThing) that are not
exported. These are merely placeholders.
The configuration work in this PR is also unused of yet. But the code
is compiled. Once merged, we can begin the next step of development.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Previously the WSL user-mode networking distribution was only installed as part
of a change, when it should have been also applied installs. This mean that the
init flag usage only worked after a previous set command.
[NO NEW TESTS NEEDED]
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Fixed a bug where `podman machine rm -f` would cause a deadlock when
running with WSL.
The deadlock is caused by the Remove() function calling the Stop()
function after Remove() locks the VM. Stop() also has a lock call, which
fails and deadlocks because Remove() already claimed lock. Fix this by
moving the stop call before the lock
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
QEMU usb-host driver which is the one for passthrough, supports two
options for selecting an USB devices in the host to provide it to the
VM:
- Bus and Device number the device is plugged
- Vendor and Product information of the USB devices
https://qemu-project.gitlab.io/qemu/system/devices/usb.html
This commit allows a user to configure podman machine with either of
options, with new --usb command line option for podman machine init.
Examples
podman machine init tosovm4 --usb vendor=13d3,product=5406
podman machine init tosovm3 --usb bus=1,devnum=4 --usb bus=1,devnum=3
This commit also allows a user to change the USBs configured with
--usb command line option for podman machine set.
Note that this commit does not handle host device permissions nor
verify that the USB devices exists.
Signed-off-by: Victor Toso <victortoso@redhat.com>
In #20538, I was asked to consider refactoring the new OCI pull code
from within the generic machine directory. This is something I had
tried when originally coding it but it became apparent that a much
larger refactor to prevent circular deps was needed. Because I did not
want to pollute the initial PR with that refactor, I asked for the PR to
merge first. This is the refactor that needed to be done.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Implements a shared `GetLock` function for virtualization providers. Returns
a pointer to a lockfile used for serializing write operations.
[NO NEW TESTS NEEDED]
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
If init fails, or if a SIGINT is sent during init, podman machine should remove all files and configs
created during the init. This includes config jsons, image files, ssh
id's, and system connections. On Windows, the VM instances are also
unregistered.
Signed-off-by: Ashley Cui <acui@redhat.com>
This reverts commit 5b990c3835.
PR #19994
Causes wsl nsenter script to infinitely loop in standard operation
[NO NEW TESTS NEEDED]
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
allow the machine stop test to pass.
small change to WSL stop on an already stopped machine to allow for it
to behave like hyperv and qemu
Signed-off-by: Brent Baude <bbaude@redhat.com>
the emitted message for starting a machine that is is already started
needed to be slightly altered for wsl.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
