We do not use any special netns path for the netns=none case, however
callers that inspect that may still wish to join the netns path directly
without extra work to figure out /proc/$pid/ns/net.
Fixes#16716
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
For pods with bridged and slirp4netns networking we create /etc/hosts
entries to make it more convenient for the containers to address each
other. We omitted to do this for pasta networking, however. Add the
necessary code to do this.
Closes: https://github.com/containers/podman/issues/17922
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Most of the code moved there so if from there and remove it here.
Some extra changes are required here. This is a bit of a mess. The pipe
handling makes this a bit more difficult.
[NO NEW TESTS NEEDED] This is just a rework, existing tests must pass.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make sure to tear down the netns again on errors. This is needed when a
later call fails and we do not have already stored the netns in the
container state.
[NO NEW TESTS NEEDED] My ginkgo-v2 PR will catch problem like this once
merged.
Fixes#18205
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I made a change in c/common[1] to prevent duplicates in netns names.
This now causes problem in podman[2] where the rootless netns will no
longer work after the netns got invalid but the underlying path still
exists. AFAICT this happens when the podman pause process got killed and
we are now in a different user namespace.
While I do not know what causes this, this commit should make it at
least possible to recover from this situation automatically as it used
to be before[1].
the problem with that is that containers started before it will not be
able to talk to contianers started after this. A restart of the previous
container will fix it but this was also the case before.
[NO NEW TESTS NEEDED]
[1] https://github.com/containers/common/pull/1381
[2] https://github.com/containers/podman/issues/17903#issuecomment-1494169843
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Loading container states speed things up when listing all containers but
it comes with a price tag for many other call paths. Hence, make
loading the state conditional to allow for keeping `podman ps` fast
without other commands regressing in performance.
[NO NEW TESTS NEEDED]
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This should simplify the db logic. We no longer need a extra db bucket
for the netns, it is still supported in read only mode for backwards
compat. The old version required us to always open the netns before we
could attach it to the container state struct which caused problem in
some cases were the netns was no longer valid.
Now we use the netns as string throughout the code, this allow us to
only open it when needed reducing possible errors.
[NO NEW TESTS NEEDED] Existing tests should cover it and it is only a
flake so hard to reproduce the error.
Fixes#16140
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We should have done this much earlier, most of the times CNI networks
just mean networks so I changed this and also fixed some function
names. This should make it more clear what actually refers to CNI and
what is just general network backend stuff.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Also update vendor of containers/storage and image
Cleanup display of added/dropped capabilties as well
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We should not keep the netns if there was a cleanup problem. Deleting
the netns will also delete the virtual links inside and thus make the IPs
available again for the next use.
context: https://github.com/containers/netavark/issues/302
[NO NEW TESTS NEEDED] This is very hard to trigger reliable and it would
need to work with cni and netavark. This mostly happens because of
specic bugs but those will be fixed and then this test would fail.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Package `io/ioutil` was deprecated in golang 1.16, preventing podman from
building under Fedora 37. Fortunately, functionality identical
replacements are provided by the packages `io` and `os`. Replace all
usage of all `io/ioutil` symbols with appropriate substitutions
according to the golang docs.
Signed-off-by: Chris Evich <cevich@redhat.com>
This also moves Runtime methods ConnectContainerToNetwork and
DisconnectContainerFromNetwork as well as support functions
getFreeInterfaceName and normalizeNetworkName.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
libpod: Move (Connect|Disconnect)Container(To|From)Network and normalizeNetworkName to networking_common.go
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
Podman adds an Error: to every error message. So starting an error
message with "error" ends up being reported to the user as
Error: error ...
This patch removes the stutter.
Also ioutil.ReadFile errors report the Path, so wrapping the err message
with the path causes a stutter.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Compat: Treat already attached networks as a no-op
Applies only to containers in created state. Maintain error in running state.
Co-authored-by: Alessandro Rossi <al.rossi87@gmail.com>
Co-authored-by: Brent Baude <bbaude@redhat.com>
Co-authored-by: Jason T. Greene <jason.greene@redhat.com>
Signed-off-by: Alessandro Rossi <al.rossi87@gmail.com>
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
* Replace "setup", "lookup", "cleanup", "backup" with
"set up", "look up", "clean up", "back up"
when used as verbs. Replace also variations of those.
* Improve language in a few places.
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
Podman and Buildah should use the same code the generate the resolv.conf
file. This mostly moved the podman code into c/common and created a
better API for it so buildah can use it as well.
[NO NEW TESTS NEEDED] All existing tests should continue to pass.
Fixes#13599 (There is no way to test this in CI without breaking the
hosts resolv.conf)
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Hardcoding the interface name is a bad idea. We have no control over the
actual interface name since the user can change it.
The correct thing is to read them from the network status. Since the
contianer can have more than one interface we have to add the RX/TX
values. The other values are currently not used.
For podman 5.0 we should change it so that the API can return the
statistics per interface and the client should sum the TX/RX for the
command output. This is what docker is doing.
Fixes#13824
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Based on WSL2 9p support: remaps windows paths to /mnt/<drive> locations for
both podman and Docker API clients.
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
SHA-1 is prone to collisions.
This will likely break connectivity between old containers started
before update and containers started after update. It will also fail to
cleanup old netns. A reboot will fix this, so a reboot is recommended
after update.
[NO NEW TESTS NEEDED]
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
When we connect or disconnect from a network we also have to update
/etc/hosts to ensure we only have valid entries in there.
This also fixes problems with docker-compose since this makes use of
network connect/disconnect.
Fixes#12533
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When you run podman on a non systemd system we should not try to move the
process under a new systemd scope.
[NO NEW TESTS NEEDED]
Ref #13703
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When podman gets an error it prints out "Error: " before
printing the error string. If the error message starts with
error, we end up with
Error: error ...
This PR Removes all of these stutters.
logrus.Error() also prints out that this is an error, so no need for the
error stutter.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This primarily served to protect us against shutting down the
Libpod runtime while operations (like creating a container) were
happening. However, it was very inconsistently implemented (a lot
of our longer-lived functions, like pulling images, just didn't
implement it at all...) and I'm not sure how much we really care
about this very-specific error case?
Removing it also removes a lot of potential deadlocks, which is
nice.
[NO NEW TESTS NEEDED]
Signed-off-by: Matthew Heon <mheon@redhat.com>
The `podman network connect` and `podman network disconnect`
commands give containers access to different networks than the
ones they were created with; these networks can also have DNS
servers associated with them. Until now, however, we did not
modify resolv.conf as network membership changed.
With this PR, `podman network connect` will add any new
nameservers supported by the new network to the container's
/etc/resolv.conf, and `podman network disconnect` command will do
the opposite, removing the network's nameservers from
`/etc/resolv.conf`.
Fixes#9603
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
