Make sure we're waiting for the ls container to finish to prevent
potential flakes or future regressions.
Spotted while enabling a linter.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Containers started with `--no-healthcheck` are configured to contain no
healthcheck and test configured as `NONE`. Podman shows wrong status as
such use cases.
Following commit fixes the faulty behavior of stauts field for
containers started with `--no-healthcheck`
Signed-off-by: Aditya R <arajan@redhat.com>
The calculate the percentage we need floating point numbers. The current
code however casted the result of reclaimable/size to an int first.
Casting to an int in go will just discard the decimal points, thus the
result was either 0 or 1 so if multiplied by 100 it would show up as 0%
or 100%.
To fix this we have to multiply by 100 first before casting the result
to an int. Also add a check for div by zero which results in NaN and use
math.Round() to correctly round a number.
Ref #13516
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
One of the pod tests was leaving a stray image behind,
causing scary red warnings in CI logs. Clean that up.
Also, now that #13541 has merged, use 'rmi --ignore' instead of
ignoring exit status from rmi
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add an `--ignore` flag to `podman image rm` to instruct ignoring image
if a specified image does not exist and to not throw an error. Other
commands (e.g., `podman container rm`) already support this flag.
Such an `--ignore` flag can come in handy in clean-up scripcts such as
the teardown phases in the Podman tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Update the login tests to reflect the latest changes to allow http{s}
prefixes (again) to address bugzilla.redhat.com/show_bug.cgi?id=2062072.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Compose v2 uses dashes as separators instead of hyphens. This
broke some tests that relied upon container names. Set the name
conditionally to make it safe for both.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Make sure to ignore local {container,docker}ignore files when building a
local pause image. Otherwise, we may mistakenly not be able to copy
catatonit into the build container.
Fixes: #13529
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When podman generate systemd is invoked, it previously did not check if
container-prefix or pod-prefix are empty. When these are empty, the file name
starts with the separator, which is hyphen by default. This results in files
like '-containername.service'.
The code now checks if these prefixes are empty. If they are, the filename no
longer adds a separator. Instead, it uses name or ID of the container or pod.
Closes#13272
Signed-off-by: Nirmal Patel <npate012@gmail.com>
* systemctl stop podman.service will now return exit code 0
* Update test framework to support JSON boolean and numeric values
Signed-off-by: Jhon Honce <jhonce@redhat.com>
There is a lot of unneeded code, k8s is the by far the biggest
dependency in podman. We should remove as much as possible so that we
only have the stuff left that we use.
This is just a quick skim over the code which removes a lot of the
generated code and many packages that are now unused.
I know that this will be impossible to properly review. I will try to
make smaller changes in follow up work.
Right now this reduces about 8 MB in binary size!!!
[NO NEW TESTS NEEDED] Hopefully existing tests will catch any problems.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We only need a small part of the k8s dependencies but they are the
biggest dependencies in podman by far. Moving them into podman allows us
to remove the unnecessary parts.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
All podman tests in CI expects exit code 125, which might not be true since exit code from runtime
is relayed as it is without any modification both in `buildah` and `podman`. Following behviour is seen when PR https://github.com/containers/buildah/pull/3809
added a test here https://github.com/containers/buildah/blob/main/tests/bud.bats#L3183 which relays exit code from runtime as it
is, in case of both `podman` and `buildah`. However apart from this test case no other test case was able to trigger this behviour hence
marking this test as an anomaly. Since its debatable if we should override this returned error number or not hence adding a note here.
Signed-off-by: Aditya R <arajan@redhat.com>
Bumps
c/buildah to -> `v1.24.3-0.20220310160415-5ec70bf01ea5`
c/storage to -> `v1.38.3-0.20220308085612-93ce26691863`
c/image to -> `v5.20.1-0.20220310094651-0d8056ee346f`
Signed-off-by: Aditya R <arajan@redhat.com>
Allow users to add annotions in the podman play kube command.
This PR Also fixes the fact that annotations in the pod spec were
not being passed down to containers.
Fixes: https://github.com/containers/podman/issues/12968
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
pprof tests are way too flaky, and are causing problems for
community contributors who don't have privs to press Re-run.
There has been no activity or interest in fixing the bug,
and it's not something I can fix. So, just disable the test.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Secret-verify-leak is causing flakes, when running in parallel tests.
This is because remote secrets are copied into the context directory to
send to the API server, and secret-verify-leak is doing a COPY * and
then checking if the temporary secret file ends up in the container or
not. Since all the temporary files are prefixed with
"podman-build-secret", this test checks if podman-build-secret is in the
image. However, when run in parallel with other tests, other temporary
podman-build-secrets might be in the context dir. Moving
secret-verify-leak into its own directory makes sure that the context
dir is used only by this one test.
Also renamed Dockerfile -> Containerfile and cleaned up unused
Containerfiles.
Signed-off-by: Ashley Cui <acui@redhat.com>
The default rule should be set at the head of device configuration.
Otherwise, rules for user devices are overridden by the default rule so
that any access to the user devices are denied.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Error out if the kube yaml passed to play kube has more
than one container or init container with the same name.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* Add configuration to add report header for python client used in tests
* Move report headers into the individual test runners vs runner.sh
Signed-off-by: Jhon Honce <jhonce@redhat.com>
While resolving `workdir` we mostly create a `workdir` when `stat`
fails with `ENOENT` or `ErrNotExist` however following cases are not
true when user explicitly specifies a `workdir` while `running` using
`--workdir` which tells `podman` to only use workdir if its exists on
the container. Following configuration is implicity set with other
`run` mechanism like `podman play kube`
Problem with explicit `--workdir` or similar implicit config in `podman play
kube` is that currently podman ignores the fact that workdir can also be
a `symlink` and actual `link` could be valid.
Hence following commit ensures that in such scenarios when a `workdir`
is not found and we cannot create a `workdir` podman must perform a
check to ensure that if `workdir` is a `symlink` and `link` is resolved
successfully and resolved link is present on the container then we
return as it is.
Docker performs a similar behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
