Avoid using the image from load storage for `manifest create` and `manifest add`
since the local image does not include other entries of the list from the registry.
`--all` flag of `manifest create` and `manifest add` can not add all of the lists as expected.
Signed-off-by: Qi Wang <qiwan@redhat.com>
The cni plugin `tuning` is required to set a custom mac address.
This plugin is configured in the default cni config file which is
packaged with podman but was not included the generated config form
`podman network create`.
Fixes#8385
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
a bug was being caused by the fact that the container network results
were not being updated properly.
given that jhon is on PTO, this PR will replace #8362
Signed-off-by: baude <bbaude@redhat.com>
* Make endpoint compatibile with docker-py network expectations
* Update specgen helper when called from compat endpoint
* Update godoc on types
* Add test for network/container create using docker-py method
* Add syslog logging when DEBUG=1 for tests
Fixes#8361
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This fixes an issue where binaries that are in the path of the original
podman process are not found in the transient systemd timer for
healthchecks.
This showed up for me on a NixOS machine since binaries are not installed
in the usual places.
Signed-off-by: Marco Munizaga <git@marcopolo.io>
The `LastIPInSubnet` function worked only for classful subnet
masks (e.g. /8, /16, /24). For non standard subnet masks this
returned the wrong ip address.
This works now for all subnet mask. A unit test is added to
ensure this.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
This makes things a lot more clear - if we are actually joining a
CNI network, we are guaranteed to get a non-zero length list of
networks.
We do, however, need to know if the network we are joining is the
default network for inspecting containers as it determines how we
populate the response struct. To handle this, add a bool to
indicate that the network listed was the default network, and
only the default network.
Signed-off-by: Matthew Heon <mheon@redhat.com>
When running on cgroups v1, `/proc/{PID}/cgroup` has multiple entries,
each pointing potentially to a different cgroup. Some may be empty,
some may point to parents.
The one we really need is the libpod-specific one, which always is the
longest path. So instead of looking at the first entry, look at all and
select the longest one.
Fixes: #8397
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
this enables the ability to connect and disconnect a container from a
given network. it is only for the compatibility layer. some code had to
be refactored to avoid circular imports.
additionally, tests are being deferred temporarily due to some
incompatibility/bug in either docker-py or our stack.
Signed-off-by: baude <bbaude@redhat.com>
Filters with the same key work inclusive with the only exception being
`label` which is exclusive. Filters with different keys always work exclusive.
Also update the documentation with the new behavior.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
All of our filters worked exclusive resulting in `--filter status=created --filter status=exited` to return nothing.
In docker filters with the same key work inclusive with the only exception being `label` which is exclusive. Filters with different keys always work exclusive.
This PR aims to match the docker behavior with podman.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
this enables the ability to connect and disconnect a container from a
given network. it is only for the compatibility layer. some code had to
be refactored to avoid circular imports.
additionally, tests are being deferred temporarily due to some
incompatibility/bug in either docker-py or our stack.
Signed-off-by: baude <bbaude@redhat.com>
When looking up a container's cgroup path, parse /proc/[PID]/cgroup.
This will work across all cgroup managers and configurations and is
supported on cgroups v1 and v2.
Fixes: #8265
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The --hostname and containername should always be added to containers.
Added some tests to make sure you can always ping the hostname and container
name from within the container.
Fixes: https://github.com/containers/podman/issues/8095
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
One main advantage of the new shell completion logic is that
we can easly parse flags and adjust based on the given flags
the suggestions. For example some commands accept the
`--latest` flag only if no arguments are given.
This commit implements this logic in a simple maintainable way
since it reuses the already existing `Args` function in the
cmd struct.
I also refactored the `getXXX` function to match based on the
namei/id which could speed up the shell completion with many
containers, images, etc...
I also added the degraded status to the valid pod status
filters which was implemented in #8081.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Convert the existing network aliases set/remove code to network
connect and disconnect. We can no longer modify aliases for an
existing network, but we can add and remove entire networks. As
part of this, we need to add a new function to retrieve current
aliases the container is connected to (we had a table for this
as of the first aliases PR, but it was not externally exposed).
At the same time, remove all deconflicting logic for aliases.
Docker does absolutely no checks of this nature, and allows two
containers to have the same aliases, aliases that conflict with
container names, etc - it's just left to DNS to return all the
IP addresses, and presumably we round-robin from there? Most
tests for the existing code had to be removed because of this.
Convert all uses of the old container config.Networks field,
which previously included all networks in the container, to use
the new DB table. This ensures we actually get an up-to-date list
of in-use networks. Also, add network aliases to the output of
`podman inspect`.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When making containers, we want to lock all named volumes we are
adding the container to, to ensure they aren't removed from under
us while we are working. Unfortunately, this code did not account
for a container having the same volume mounted in multiple places
so it could deadlock. Add a map to ensure that we don't lock the
same name more than once to resolve this.
Fixes#8221
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The error message reported is overlay complicated and the added test does not
really help the user.
Currently the error looks like:
podman run -p 80:80 fedora echo hello
Error: failed to expose ports via rootlessport: "cannot expose privileged port 80, you might need to add "net.ipv4.ip_unprivileged_port_start=0" (currently 1024) to /etc/sysctl.conf, or choose a larger port number (>= 1024): listen tcp 0.0.0.0:80: bind: permission denied\n"
After this change
./bin/podman run -p 80:80 fedora echo hello
Error: cannot expose privileged port 80, you might need to add "net.ipv4.ip_unprivileged_port_start=0" (currently 1024) to /etc/sysctl.conf, or choose a larger port number (>= 1024): listen tcp 0.0.0.0:80: bind: permission denied
Control chars have been eliminated.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
enable the ipv6 flag in podman network to be able to create
dual-stack networks for containers.
This is required to be compatible with docker, where --ipv6
really means dual stack.
podman, unlike docker, support IPv6 only containers since
07e3f1bba9674c0cb93a0fa260930bfebbf75728.
Signed-off-by: Antonio Ojea <aojea@redhat.com>
podman can now support adding network aliases when running containers
(--network-alias). It requires an updated dnsname plugin as well as an
updated ocicni to work properly.
Signed-off-by: baude <bbaude@redhat.com>
We are resolving the homedir of the user in many different
places. This Patch consolodates them to use container/storage
version.
This PR also fixes a failure mode when the homedir does not
exists, and the user sets a root path. In this situation
podman should continue to work. Podman does not require a users
homedir to exist in order to run.
Finally the rootlessConfigHomeDirOnce and rootlessRuntimeDirOnce
were broken, because if an error ever happened, they would not be recorded
the second time, and "" would be returned as the path.
Fixes: https://github.com/containers/podman/issues/8131
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Continue progress on use of external containers.
This PR adds the ability to mount, umount and list the
storage containers whether they are in libpod or not.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
As part of this, we need two new functions, for retrieving all
aliases for a network and removing all aliases for a network,
both required to test.
Also, rework handling for some things the tests discovered were
broken (notably conflicts between container name and existing
aliases).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When using multiple filters, return a volume that matches any one of the used filters, rather than matching both of the filters.
This is for compatibility with docker's cli, and more importantly, the apiv2 compat endpoint
Closes#6765
Signed-off-by: Ashley Cui <acui@redhat.com>
Allow users to specify unbindable on volume command line
Switch internal mounts to rprivate to help prevent leaks.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
