We only use the `ip` util to remove a network interface. We can do
this directly via the netlink lib, no need to call a external binary.
[NO TESTS NEEDED]
Fixes#11403
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Creating the rootlessport socket can fail with `bind: invalid argument`
when the socket path is longer than 108 chars. This is the case for
users with a long runtime directory.
Since the kernel does not allow to use socket paths with more then 108
chars use a workaround to open the socket path.
[NO TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Secret environment variables were only available to a podman run/start.
This commit makes sure that exec sessions can see them as well.
Signed-off-by: Ashley Cui <acui@redhat.com>
Make sure that Podman passes the LISTEN_* environment into containers.
Similar to runc, LISTEN_PID is set to 1.
Also remove conditionally passing the LISTEN_FDS as extra files.
The condition was wrong (inverted) and introduced to fix#3572 which
related to running under varlink which has been dropped entirely
with Podman 3.0. Note that the NOTIFY_SOCKET and LISTEN_* variables
are cleared when running `system service`.
Fixes: #10443
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When /etc/resolv.conf is a symlink to an absolute path use it and not
join it the the previous path.
[NO TESTS NEEDED] This depends on the host layout.
Fixes#11358
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There are use-cases where users would want to use overlay-mounts as
workdir. For such cases workdir should be resolved after all the mounts
are completed during the container init process.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
Podman inspect has to show exposed ports to match docker. This requires
storing the exposed ports in the container config.
A exposed port is shown as `"80/tcp": null` while a forwarded port is
shown as `"80/tcp": [{"HostIp": "", "HostPort": "8080" }]`.
Also make sure to add the exposed ports to the new image when the
container is commited.
Fixes#10777
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Implement a new network interface to abstract CNI from libpod. The
interface is implemented for the CNI backend but in the future we can
add more backends.
The code is structured in three new packages:
- `libpod/network/types`: contains the interface definition
and the necessary types for it.
- `libpod/network/cni` contains the interface implementation for the CNI
backend.
- `libpod/network/util` a set of utility functions related to
networking.
The CNI package uses ginkgo style unit tests. To test Setup/Teardown the
test must be run as root. Each test will run in their own namespace to
make the test independent from the host environment.
New features with the CNI backend:
- The default network will be created in memory if it does not exists on
disk.
- It can set more than one static IP per container network.
- Networks are loaded once from disk and only if this interface is
used, e.g. for commands such as `podman info` networks are not loaded.
This reduces unnecessary disk IO.
This commit only adds the interface it is not wired into libpod. This
requires a lot of breaking changes which will be done in a followup
commit.
Once this is integrated into libpod the current network code under
`libpod/network` should be removed. Also the dependency on OCICNI
should be dropped.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
In libpod/logs.LogLine.Write(), don't write a newline to stdout/stderr
when the log message is only part of a line.
In libpod.ConmonOCIRuntime.HTTPAttach(), don't send a newline over the
HTTP connection when the log message is only part of a line.
In pkg/api/handlers/compat.LogsFromContainer(), don't send a newline
over the HTTP connection when the log message is only part of a line,
and don't make doing so conditional on whether or not the client used
the docker or podman endpoint.
In pkg/domain/infra/tunnel.ContainerEngine.ContainerLogs(), don't add
our own newline to log messages, since they already come through from
the server when they need to.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
When reading log entries from the journal, don't skip past the first
matching entry after we've positioned the cursor at it.
Make the first blank-line entry that we logged so that the container
would always have at least one log entry for us to find (until it gets
vacuumed out, at least) a fake history entry, so that `logs` doesn't
pass it on for display.
CI already has tests that exercise journal-based logging, so
[NO TESTS NEEDED]
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
we were adding a negative duration in podman events, causing inputs like
-5s to be correct and 5s to be incorrect.
fixes#11158
Signed-off-by: cdoern <cdoern@redhat.com>
Adds support for transferring data between systems and backing up systems.
Use cases: recover from disasters or move data between machines.
Signed-off-by: flouthoc <flouthoc.git@gmail.com>
This leverages conmon's ability to proxy the SD-NOTIFY socket.
This prevents locking caused by OCI runtime blocking, waiting for
SD-NOTIFY messages, and instead passes the messages directly up
to the host.
NOTE: Also re-enable the auto-update tests which has been disabled due
to flakiness. With this change, Podman properly integrates into
systemd.
Fixes: #7316
Signed-off-by: Joseph Gooch <mrwizard@dok.org>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When a network id is used to create a container we translate it to use the
name internally for the db. The network aliases are also stored with the
network name as key so we have to also translate them for the db.
Also removed some outdated skips from the e2e tests.
Fixes#11285
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
For docker compat include information about available volume, log and
network drivers which should be listed under the plugins key.
Fixes#11265
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Originally, Podman would unconditionally remove volumes from the
DB, even if they failed to be removed from the volume plugin;
this was a safety measure to ensure that `volume rm` can always
remove a volume from the database, even if the plugin is
misbehaving.
However, this is a significant deivation from Docker, which
refuses to remove if the plugin errors. These errors can be
legitimate configuration issues which the user should address
before the volume is removed, so Podman should also use this
behaviour.
Fixes#11214
Signed-off-by: Matthew Heon <mheon@redhat.com>
Dealing with os.Signal channels seems more like an art than science
since signals may get lost. os.Notify doesn't block on an unbuffered
channel, so users are expected to know what they're doing or hope for
the best.
In the recent past, I've seen a number of flakes and BZs on non-amd64
architectures where I was under the impression that signals may got
lost, for instance, during stop and exec.
[NO TESTS NEEDED] since this is art.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When a host uses systemd-resolved but not the resolved stub resolver the
following symlinks are created: `/etc/resolv.conf` ->
`/run/systemd/resolve/stub-resolv.conf` -> `/run/systemd/resolve/resolv.conf`.
Because the code uses filepath.EvalSymlinks we put the new resolv.conf
to `/run/systemd/resolve/resolv.conf` but the `/run/systemd/resolve/stub-resolv.conf`
link does not exists in the mount ns.
To fix this we will walk the symlinks manually until we reach the first
one under `/run` and use this for the resolv.conf file destination.
This fixes a regression which was introduced in e73d4829900c.
Fixes#11222
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
after the init containers pr merged, it was suggested to use `once`
instead of `oneshot` containers as it is more aligned with other
terminiology used similarily.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
The slirp4netns path can be set in the config file or with
--network-cmd-path. Podman info should read the version information
correctly and not use PATH in this case. Also show the slirp4netns
version information to root users.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
this is the first pass at implementing init containers for podman pods.
init containersare made popular by k8s as a way to run setup for pods
before the pods standard containers run.
unlike k8s, we support two styles of init containers: always and
oneshot. always means the container stays in the pod and starts
whenever a pod is started. this does not apply to pods restarting.
oneshot means the container runs onetime when the pod starts and then is
removed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
To match Docker's behavior, in the `--net=host` case, we need to
use the host's `/etc/hosts` file, unmodified (without adding an
entry for the container). We will still respect hosts from
`--add-host` but will not make any automatic changes.
Fortuntely, this is strictly a matter of removal and refactoring
as we already base our `/etc/hosts` on the host's version - just
need to remove the code that added entries when net=host was set.
Fixes#10319
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
podman info takes >20s on Gentoo, because equery is s..l..o..w.
qfile is much faster and, I suspect, present in most Gentoo
installations, so let's try it first.
And, because packageVersion() was scarily unmaintainable,
refactor it. Define a simple (string) list of packaging tools
to query (rpm, dpkg, ...) and iterate until we find one that
works.
IMPORTANT NOTE: the Debian (and, presumably, Ubuntu) query does not
include version number! There is no standard way on Debian to get
a package version from a file path, you can only do it via pipes
of chained commands, and I have no desire to implement that.
Signed-off-by: Ed Santiago <santiago@redhat.com>
