Break out the code for pulling images via the compat API. The goal is to
make this code shareable between the compat and libpod API to allow for
a "compat mode" in the libpod pull endpoint.
[NO NEW TESTS NEEDED] as it should not change behavior.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The network list compat API requires us to include all containers with
their ip addresses for the selected networks. Because we have no network
-> container mapping in the db we have to go through all containers
every time. However the old code did it in the most ineffective way
possible, it quered the containers from the db for each individual
network. The of course is extremely expensive. Now the other expensive
call is calling Inspect() on the container each time. Inspect does for
more than we need.
To fix this we fist query containers only once for the API call, then
replace the inspect call with directly accessing the network status.
This will speed things up a lot!
The reported scenario includes 100 containers and 25 networks,
previously it took 1.5s for the API call not it takes 24ms, that is a
more than a 62x improvement. (tested with curl)
[NO NEW TESTS NEEDED] We have no timing tests.
Fixes#20035
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add support for --layerLabel.
Support for --cw is only added for the local client. I am not sure how
I would wire this over remote. The current code parse the options in
the frontend which hard codes the Tmpdir field to an incorrect value if
we would json marshal this vie remote API so it would not work in real
remote cases.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
pkg/api/handlers is used for type definitions by pkg/bindings,
i.e. podman-remote; a libimage dependency means that podman-remote
would also include libimage.
Instead, move the ImageDataToImageInspect function close to the
only user (and make it private).
[NO NEW TESTS NEEDED]: Only moves unchanged code (apart from a required
warning fix), should not change behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Currently containers created via DOCKER API without specifying
StopTimeout are defaulting to 0 seconds. This change should
default them to setting in containers.conf normally 10 seconds.
Fixes: https://github.com/containers/podman/issues/19139
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This reverts commit 5b148a0a68.
Reverting to treating the `pull` query parameter as a boolean.
Because of deceiving Docker API documentation it was assumed that the
parameter is pull-policy, however that is not true. Docker does treat
`pull` as a boolean. What is interesting is that Docker indeed accepts
strings like `always` or `never` however Docekr both of these strings
treat as `true`, not as pull-policy. As matter of the fact it seems
there is no such a thing as pull-policy in Docker.
More context https://github.com/containers/podman/issues/17778#issuecomment-1673931925
Signed-off-by: Matej Vasek <mvasek@redhat.com>
Compat api for containers/stop should take -1 value
Add support for `podman stop --time -1`
Add support for `podman restart --time -1`
Add support for `podman rm --time -1`
Add support for `podman pod stop --time -1`
Add support for `podman pod rm --time -1`
Add support for `podman volume rm --time -1`
Add support for `podman network rm --time -1`
Fixes: https://github.com/containers/podman/issues/17542
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Adds support for `since` as a valid filter option for `podman volume ls`
and `podman volume prune`.
Implements: #19228
Initially suggested from: #19119
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Fixes a bug where `podman volume ls` with multiple `label` filters would
return volumes that matched *any* of the filters, not *all* of them.
Adapts generating volume filter functions to be more in
line with how it is done for containers and pods.
Fixes: #19219
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
This endpoint queried the same package versions twice causing it to be
slower than info. Because it already called info we can just reuse the
package versions from there.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This adds the 'system service' command to the build on FreeBSD and
suppresses the call to servicereaper.Start which is only needed to
support slirp4netns on Linux. A stub for compat.StatsContainer is also
added - stats are still supported via the libpod.StatsContainer API
call.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
Wait before sending status code 200 for the first top call and if that
fails return a proper error code.
This was leading to some confusion in [1] because podman just reported
200 but did not wirte anything back.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2215572
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Massage the internal APIs to use a string slice instead of a state slice
for passing wait conditions. This paves the way for waiting on
non-state conditions such as "healthy".
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the create endpoint does not always return 200 even in
case of a failure. Some of the code had to be massaged since encoding a
report implies sending a 200.
Fixes: #15828
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the push endpoint does not always return 200 even in case
of a push failure. Some of the code had to be massaged since encoding a
report implies sending a 200.
Fixes: #18751
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The platform parameter has been ignored such that images have been
looked up by name only.
Fixes: #18951
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Fixes: https://github.com/containers/podman/issues/18239
[NO NEW TESTS NEEDED]
@test "podman build -f test" in test/system/070-build.bats
Will test this. This was passing when run on a local system since
the remote end was using the clients path to read the Containerfile
The issue is it would not work in a podman machine since the
Containerfile would/should be a different path.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Also reflect removed/deprecated fields in the compat API.
[NO NEW TESTS NEEDED]
Signed-off-by: Renovate Bot <bot@renovateapp.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Accept a tag in the compat api endpoint. For the fromImage param we
already parse it but for fromSrc we did not.
Fixes#18597
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The logic which checks for duplicated volumes here did not work
correctly because it used filepath.Clean(). However the writes to the
volDestinations map did not thus the string no longer matched when you
included a final slash for example.
So we can either call Clean() on all or no paths. I decided to call it
on no path because this is what we do right now. Just the check did it.
Fixed#18454
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman and Docker clients split the filter map slightly different, so
account for that when parsing the filters in the image-listing endpoint.
Fixes: #18092
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Wire in support for writing the digest of the pushed image to a
user-specified file. Requires some massaging of _internal_ APIs
and the extension of the push endpoint to integrate the raw manifest
(i.e., in bytes) in the stream.
Closes: #18216
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
PR #15093 implemented support for NoPrune in the ImageRemoveOptions,
this PR simply brings that also to the compat API along with
regression tests.
Signed-off-by: Andreas Kohn <andreas.kohn@gmail.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Podman is attempting to split the headers returned by the ps
command into a list of headers. Problem is that some headers
are multi-word, and headers are not guaranteed to be split via
a tab. This PR splits the headers bases on white space, and for
the select group of CAPS headers which are multi-word, combines
them back together.
Fixes: https://github.com/containers/podman/issues/17524
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The standard lib states that server handlers don't need to close the
body, so let's not do that to avoid any unforeseen side effect.
[NO TESTS NEEDED] - existing tests should suffice.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
We use the same endpoint for libpod and docker compat API. However as
reported docker returns "id" lowercase. Because we cannot break the
libpod API right now keep the output for the libpod endpoint and only
change the docker one.
To do so simply use two types that we can cast with different JSON tags.
Fixes#17869
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we searching any image at a container registry,
--cert-dir and --creds could be required
as well as push, pull, etc.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Use `auth.Login` as `podman login` does which parses and normalizes the
input addresses correctly, especially for docker.io.
[NO NEW TESTS NEEDED] as we do not have means to test logging into
docker.io in CI.
Fixes: #17571
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
If the name already exists and CheckDuplicate is set we need to return
409, if CheckDuplicate is not set we return the network without error.
Fixes#17585
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Also includes unreleased https://github.com/openshift/imagebuilder/pull/246 to work
with the updated docker/docker dependency.
And updates some references to newly deprecated docker/docker symbols.
[NO NEW TESTS NEEDED]
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Handle a race condition in the REST API when listing networks.
In between listing all containers and inspecting them, they may have
already been removed, so handle this case gracefully.
[NO NEW TESTS NEEDED] as it's a race condition.
Fixes: #17341
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add missing return after utils.Error(),
utils.InternalServerError(), utils.BadRequest().
[NO NEW TESTS NEEDED]
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
