Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Remove the container/pod ID file along with the container/pod. It's
primarily used in the context of systemd and are not useful nor needed
once a container/pod has ceased to exist.
Fixes: #16387
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
--insecure and --verbose flags for docker compatibility
--tls-verify for syntax compatibility and allow users to inspect
manifests at remote Container Registiries without requiring tls.
Helps fix: https://github.com/containers/podman/issues/14917
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the abilitiy to deploy the generated kube yaml to a
kubernetes cluster with the podman kube apply command.
Add support to directly apply containers, pods, or volumes
by passing in their names or ids to the command.
Use the kubernetes API endpoints and http requests to connect
to the cluster and deploy the various kubernetes object kinds.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Underscore is special in markdown. We usually escape them
properly, but these are a few that we missed. Found using:
$ ack '[A-Z]\\fI[A-Z]' docs/build/man
(plus one that I found by accident).
If anyone has ideas on how to add a commit check for these,
please speak up. I'm at a complete loss to automate this.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add a new annotation to allow the user to point to a local tar file
If the annotation is present, import the file's content into the volume
Add a flag to PlayKubeOptions to note remote requests
Fail when trying to import volume content in remote requests
Add the annotation to the documentation
Add an E2E test to the new annotation
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
It was a bit unclear what setting it to empty means.
Also, add to the tests verification that this works.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
This just fixes the indentation which was previously breaking the
list such that the various network modes were just mixed into one large
paragraph instead of a list.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
This makees much more sense for typical service loads, and can
easily be reverted by `ReadOnly=no`.
Also updates and adds various tests for this.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
This ignores the create request if the named volume already exists.
It is very useful when scripting stuff.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Fixed the issue of `--format` and `--verbose` flags being allowed in
combination with one another.
Implemented functionality for `--format json` or `--format '{{ json }}' `.
Implemented command-completion help for `--format`.
Fixes: #16204
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
In each options/foo.md, keep a list of where the option is used.
This will be valuable to anyone making future edits, and to
those reviewing those edits.
This may be a controversial commit, because those crossref lists
are autogenerated as a side effect of the script that reads them.
It definitely violates POLA. And one day, some kind person will
reconcile (e.g.) --label, using it in more man pages, and maybe
forget to git-commit the rewritten file, and CI will fail.
I think this is a tough tradeoff, but worth doing. Without this,
it's much too easy for someone to change an option file in a way
that renders it inapplicable/misleading for some podman commands.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This adds the "podman-systemd.unit(5)" manpage that describes
the podman generators from a high level, and all the supported
options.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
This is what was supposed to be an easy two-or-three-line
change to enable a more general-purpose include mechanism
than '@@option'; one that could include an arbitrary file.
This is commit 2 of 2, the "easy" part. Unfortunately, it's
not looking good. The source .md file has UTF8 checkmarks,
and nroff is not happy with those: the generated man pages
are gross.
Another problem: the source .md might need tweaking, because
we don't want a level 1 header in the man page. Obvious solution
is to make kubernetes_support.md a .md.in file as well, and
move the tables to a separate file (or files). Deferred for later.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Accumulated cleanup from the man-page deduplication effort.
Various minor things that slipped.
--publish-all : remove duplicate "default is false" (toth @dilyanpalauzov)
--shm-size : rephrase 'you' and 'y'all'
--tls-verify : make narrower, add asterisks to true/false,
and linkify containers-registries.conf
--volume : incorporate feedback from @mheon
rename pid.md to pid.container.md, because there's a pid.pod.md
for the --pid option used in pod-related man pages.
...and some whitespace, comma, other minor edits
Fixes: #15356
Signed-off-by: Ed Santiago <santiago@redhat.com>
Refactored among all files that mentioned it.
DANGER WILL ROBINSON! REVIEW CAREFULLY! Here are two major
decisions I made:
1) Look at the text for podman-run, in particular the "" text.
It currently says "will use the default". As best I can
tell this is not true, so I changed it to "will disable"
which matches all the other commands.
2) The "containers.conf" text, I decided, applies to all
commands, not just podman-run (it was only present in
podman-run). If this is not the case, please yell.
Other changes are cosmetic formatting stuff, asterisks end newlines.
Hard to review with hack/markdown-preprocess-review, because all
the text is one horrible long line instead of 80-char breaks.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only between podman-create and -run; podman-start was too
different. (But please look into it, maybe there's a way
to reconcile the diffs).
Very minor formatting changes made to reconcile the two.
Easy to review using hack/markdown-preprocess-review
Signed-off-by: Ed Santiago <santiago@redhat.com>
The new cobra update fixed a bug which caused some options to not be
included in --help when there was already a option with the same name
on a parent command.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
[Note: I already refactored --annotation for container-related
commands; this one is for manifest-related commands]
This one needed reconciling: one man page said "newly added image",
the other said "specified image", I just reduced that to "image".
If that's not cool, any suggestions on how to make it better? Or,
just reject this PR, we can live with this duplication.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When the `XDG_CONFIG_HOME` environment variable is changed, for example,
to switch development contexts, the behavior of the podman-machine can
be confusing. The documentation had not mentioned this, and this commit
adds these mentions.
Closes: https://github.com/containers/podman/issues/15577
Reviewed-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Naoaki Ueda <nao@uedder.com>
Only between the two podman-manifest-* commands. podman-build
is too different.
Easy one, text was already identical
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only in container/pod stop/rm/restart man pages; the others
(volume-rm, network-rm, system-service) are too different to refactor.
Mostly an easy one, no manual reconciliation needed apart from
the pod-vs-container difference.
Signed-off-by: Ed Santiago <santiago@redhat.com>
