It qemu cannot be compiled anyway so make sure we do not try to compile
parts where the typechecker complains about on windows.
Also all the e2e test files are only used on linux as well.
pkg/machine/wsl also reports some error but to many for me to fix them
now. One minor problem was fixed in pkg/machine/machine_windows.go.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
layers restored from a tarball won't be converted to composefs so
disable the cache when using composefs.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The unmount for the driver home dir is done automatically by the store
on Shutdown. Do not do the unmount from the tests cleanup.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This commit gets tests working under the new local-registry system:
* amend a few image names, mostly just sticking to a consistent
list of those images in our registry cache. Mostly minor
tag updates.
* trickier: pull_test: change some error messages, and remove
a test that's now a NOP. Basically, with a local (unprotected)
registry we always get "404 manifest unknown"; with a real
registry we'll get "403 I can't tell you".
* trickiest: seccomp_test: build our own images at run time,
with our desired labels. Until now we've been pulling
prebuilt images, but those will not copy to the local
cache registry. Something about v1? Anyhow, I gave up
trying to cache them, and the workaround is straightforward.
Also took the liberty of strengthening a few error-message checks
Signed-off-by: Ed Santiago <santiago@redhat.com>
Run root e2e & system tests using composefs on rawhide.
Write magic settings to storage.conf. That part is easy.
e2e tests, however, ignore storage.conf. They require everything
to be specified on the command line. And "everything", in the
case of composefs, includes a long complicated --pull-options
string which in turn requires containers-storage PR 1966
which, as of this writing, is finally vendored into podman.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Follow up to commit eaf60c7fe7, with the toolbox image removal it is
possible to run all tests from tmpfs.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The image is way to big (over 800MB) that slows tests down as we always
have to pull this, the tests itself are also super slow due the
entrypoint logic that we don't care about. We should be testing for
features needed and not specific tools.
I think the current changes should have a similar coverage in terms of
podman features, it no longer tests toolbox but IMO this never was a
task for podman CI tests.
The main driver for this is to make the tests run entirely based on
tmpfs and this image is just to much[1].
[1] https://github.com/containers/podman/pull/22533
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
..to match the version in root dir, to get rid of the mismatch
warning on every ginkgo run.
I still don't understand why renovatebot isn't doing this.
(Also, touch a file under e2e, to force tests to run)
Signed-off-by: Ed Santiago <santiago@redhat.com>
TMPDIR is typically /tmp which is typically(*) a tmpfs.
This PR ignores $TMPDIR when $CI is defined, forcing all
e2e tests to set up one central working directory in /var/tmp
instead.
Also, lots of cleanup.
(*) For many years, up to and still including the time of
this PR, /tmp on Fedora CI VMs is actually NOT tmpfs,
it is just / (root). This is nonstandard and undesirable.
Efforts are underway to remove this special case.
Signed-off-by: Ed Santiago <santiago@redhat.com>
It is not clear why rootless was forced to the cgroupfs manager when
systemd is the default. In any case it causes local test failures as
described in the issue[1]. Using systemd manager makes them pass as
expected, I don't know enough aout cgroups to know the difference and
why certain tests have bad asumptions but this fixes it.
[1] https://github.com/containers/podman/issues/22474
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is something Docker does, and we did not do until now. Most
difficult/annoying part was the REST API, where I did not really
want to modify the struct being sent, so I made the new restart
policy parameters query parameters instead.
Testing was also a bit annoying, because testing restart policy
always is.
Signed-off-by: Matt Heon <mheon@redhat.com>
There are many code paths which only do logrus but still exit 0 so this
should catch more bugs. Unfortunately runc logs way to much random stuff
so we ignore this check for runc right now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Too many tests use port 5000. Although there's a putative GetPortLock()
it seems to be unreliable, and we often get what appear to be collisions
between tests.
A proper solution would be to pseudorandomly allocate ports, verify
that they're not being reused, Sprintf() these everywhere that
needs them, and sprinkle some powdered cinnamon on top.
This is not that proper solution.
Fixes: #20655
Signed-off-by: Ed Santiago <santiago@redhat.com>
This removes a lot of boilerplate, but also ensures that every
stop test that is not directly testing podman stop or podman pod
stop uses `-t0` for quick, error-free stopping.
Signed-off-by: Matt Heon <mheon@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
Just like all the other inspect commands that accept multiple args we
should just make podman pod inspect output a json array.
This makes the code more consistent and removes the extra workaround
which was needed before to support this.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We now no longer write containers.conf, instead system connections and
farms are written to a new file called podman-connections.conf.
This is a major rework and I had to change a lot of things to get this
to compile again with my c/common changes.
It is a breaking change for users as connections/farms added before this
commit can now no longer be removed or modified directly. However because
the logic keeps reading from containers.conf the old connections can
still be used to connect to a remote host.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Cut is a cleaner & more performant api relative to SplitN(_, _, 2) added in go 1.18
Previously applied this refactoring to buildah:
https://github.com/containers/buildah/pull/5239
Signed-off-by: Philip Dubé <philip@peerdb.io>
Test "podman start container by systemd" is failed on the system in
which rootless users don't have accessibility to journald. Therefore,
skip the part that reads journal with journalctl.
Signed-off-by: Tsubasa Watanabe <w.tsubasa@fujitsu.com>
A number of tests start a container then immediately run podman stop.
This frequently flakes with:
StopSignal SIGTERM failed to stop [...] in 10 seconds, resorting to SIGKILL
Likely reason: container is still initializing, and its process
has not yet set up its signal handlers.
Solution: if possible (containers running "top"), wait for "Mem:"
to indicate that top is running. If not possible (pods / catatonit),
sleep half a second.
Intended to fix some of the flakes cataloged in #20196 but I'm
leaving that open in case we see more. These are hard to identify
just by looking in the code.
Signed-off-by: Ed Santiago <santiago@redhat.com>
We're only testing vfs in CI. That's bad. #18822 tried to
remedy that but that only worked on system tests, not e2e.
Here we introduce CI_DESIRED_STORAGE, to be set in .cirrus.yml
in the same vein as all the other CI_DESIRED_X. Since it's 2023
we default to overlay, testing vfs only in priorfedora.
Fixes required:
- e2e tests:
- in cleanup, umount ROOT/overlay to avoid leaking mounts
- system tests:
- fix a few badly-written tests that assumed/hardcoded overlay
- buildx test: add weird exception to device-number test
- mount tests: add special case code for vfs
- unprivileged test: disable one section that is N/A on vfs
Signed-off-by: Ed Santiago <santiago@redhat.com>
Followup to #20318: now that sqlite is the podman default,
enforce that in CI as well. Test boltdb only in Prior Fedora.
In the process, discovered & cleaned up some duplication
and unused YAML anchors.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Problem: frequent CI flakes of the form:
Error: cannot listen on the TCP port: listen tcp4 :5355: bind: address already in use
Always 5355.
Cause: systemd-resolve listens on 5355, but not on 127.0.0.1. So
when GetPort() tries its is-it-in-use check by binding localhost,
it succeeds; but then podman binds * and fails.
Solution: GetPort(): test by binding 0.0.0.0.
Also, improve the failure message.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When you run e2e tests locally they use CNI unless the NETWORK_BACKEND
env was set to netavark. Because our main focus is on netavark we should
test it by default.
For local tests this should help to prevent CNI/netavark conflicts as I
assume most systems where people run tests on are on netavark by now.
For CI testing we hardcode NETWORK_BACKEND there to test both netavark
(on current fedora) and CNI (prior fedora). MAke sure to switch the
logic in the CI setup to reflect that.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Commit 2 of 2: fixes to get tests passing
Mostly reverting back to Exit(0) on tests that produce stderr,
adding stderr checks when those are missing.
One pretty big exception: "run check dns" test was completely
broken in many respects. It should never have worked under CNI,
but was passing because nslookup in that alpine image was
checking /etc/hosts. This has been fixed in subsequent alpine
images, which we're now using in this test (CITEST_IMAGE).
Signed-off-by: Ed Santiago <santiago@redhat.com>
Shortcuts like unix:path and unix:/path do not work everywhere,
so make sure to use unix://path when quoting the url (or address)
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Do not use podman info/version as they are expensive and clutter the log
for no reason. Just checking if we can connect to the socket should be
good enough and much faster.
Fix the non existing error checking, so that we actually see an useful
error when this does not work.
Also change the interval, why wait 2s for a retry lets take 100ms steps
instead.
Fixes#19010
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Like LockTmpDir use a random tmpdir for this directory. Make sure it is
set for all parallel ginkgo processes.
Also GinkgoT().TempDir() will automatcially remove the directory at the
end so we do not need to worry about cleanup.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
AFAIK the latest podman will not even run on RHEL 7 anymore, in any case
we do not need these tests to run there.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Using the OS tempdir here is not good. This defaults to /tmp which means
the inital podman test setup uses these paths:
`--root /tmp/root --runroot /tmp/runroot and --tmpdir /tmp`
Thus we create many files directly under /tmp. Also they were never
removed thus leaked out. When running as root and then later as rooltess
this would fail to permission problems.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There is no need to buffer them all into an array then write them once
at the end. Just write directly to the file.
Fixes#19104
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add header comment suggesting podman network create instead.
Stop using it in checkpoint tests. Turned out to be much more
complicated than expected.
Also, fix two issues caught while scanning the code:
- remove obsolete f28-and-earlier code.
- remove seccomp workaround needed for RHEL7
Signed-off-by: Ed Santiago <santiago@redhat.com>
For tests that use '--ip XX', random IP allocation is not
working well. Switch instead to a deterministic algorithm
with CPU affinity and a fudge factor for CNI.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Ginkgo test names can have more than two levels: there can be
a nested series of Describes() before the final It(). (e.g.,
quadlet_test.go). Handle that.
Before: we just assumed that the third-or-maybe-fourth line
after a "-----" divider was the test name.
Now: examine every line after the "-----" divider, until the
first empty line. Lines with /path/to/source/file are ignored,
lines with text strings are assembled together to make anchors.
This is still imperfect but it's much better than before.
SPECIAL NOTE: in order to allow linking to timing results
in the AfterSuite, I've changed the test name from Leaf to Full.
This will now be a much longer string, and hence much less
readable, but I'm inclined to think it's more correct. Please
review carefully and lmk if I should revert.
Finally, as an unrelated add-on, add links (at top) to original
log, journal, and (if applicable) podman-remote server logs.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Intented to fix an obscure, unlikely race condition in which (I
think) two parallel jobs called GetPort() and were assigned the
same port.
Also, add actual proper testing to two HTTP-registry tests, and
Skip a third that's a waste of cycles (filed #18768)
Signed-off-by: Ed Santiago <santiago@redhat.com>
This reverts commit c4b9f4b34e75da3df5b40fd8e8d42dde224cbd1c.
This was a temporary workaround until a fix for #18180 landed.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
"image rm concurrent" test is still failing, even after #18664:
Error: no contents in "/tmp/podman_test967723851/Dockerfile"
Probable cause: the images are built in parallel, and p.BuildImage()
writes one single Dockerfile. (This almost certainly renders the
test less effective than intended, since the generated images
might end up being identical).
Solution: write and use a uniquely-named Dockerfile
Signed-off-by: Ed Santiago <santiago@redhat.com>
There is no reason to define the same code every time in each file, just
use global nodes. This diff should speak for itself.
CleanupSecrets()/Volume() no longer call Cleanup() directly, as the
global AfterEach node will always call Cleanup() this is no longer
necessary. If one AfterEach() node fails it will still run the others.
Also always unset the CONTAINERS_CONF env vars. This prevents people
from forgetting to unset it. And fix the special CONTAINERS_CONF logic
in the system connection tests, we do not want to preserve
CONTAINERS_CONF anyway so just remove this logic.
Ginkgo orders the BeforeEach and AfterEach nodes. They will be executed
from the outer-most defined to inner-most. This means our global
BeforeEach is always first. Only then the inner one (in the Describe()
function in each file). For AfterEach it is inverted, from the inner to
the outer.
Also see https://onsi.github.io/ginkgo/#organizing-specs-with-container-nodes
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a workaround for #18180 so the ginkgo work can be merged without
being blocked by the issue. Please revert this commit when the issue
is fixed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
