When we remove with --force we do not return a error if the input does
not exists, however if we get more than on input we must try to remove
all and not just NOP out and not remove anything just because one arg
did not exists.
Also make the code simpler for commands that do have the --ignore option
and just make --force imply --ignore which reduces the ugly error
handling.
Fixes#21529
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Windows is not guaranteed to have the SSH feature installed, so prefer the use
of the built-in ssh client for all operations other than podman machine ssh,
which requires terminal pty logic. This restores previous behavior in 4.x.
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Follow up to 493179be45 which only fixed the issue on the server despite
me trying to fix it on the client as well, with this change here we
always correctly unset the default on the remote client as the
root/rootless status will be wrong.
This means it is enough for users to either have a new server or client
with the bug fix which should make the update process easier.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I am really not sure why the caller even should have the option to set
this. We should always use the correct isolation type based on the
privileges the server runs under never the client. podman-remote build
seems to send the default based on its local privs which was wrong as
well. To fix this I also changed the client to send the default if the
isolation flag is not set.
Fixes#22109
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We need to take another lock to prevent concurrent starts from different
machines.
I manually tested it by starting three VM in parallel with:
podman machine start & podman machine start test1 & podman machine start test2
I also added a CI test that seems to work as expected (failed with the
old binary, worked with the new)
Before this patch I was able to start more than VM, with this patch it
now only starts one of them and the other ones will fail to start with
a proper error.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Move the writes into the shim level to make sure they happen while we
hold the machine lock to prevent any race conditions reading/writing the
file.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
First make sure we check that a given VM exist when holding the VM lock
for it. The check in cmd/podman/machine/init.go is a nice quick out but
not enough to ensure that 2 processes to not create the same VM at the
same time. The only way to ensure this is by holding the lock and
checking if the VM config file exists.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make sure we only update the machine config when we are locked.
While it doesn't make a functional differnce for cpu and memory it was a
problem for disk size. The disk size must be larger than the previous
one so we must have accurate data on the previous value.
Thus change the settings only while locked and refresh the config so we
have the current up to date values.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Commit 03f6589f3 added basic support for pull-error event from libimage
but it contains several problems:
1. storing the error as error type prevents it from being unmarshalled,
thus change it to a string
2. the error was never propagated from the libimage event to the podman
event struct
3. the error message was not wired into the cli and API
This commit fixes these problems.
Fixes#21458
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
For podman machine init, deprecate the --image-path option for --image.
--image now accepts the correct image from containers.conf
Also, add the ability to specify an OCI image from the --image flag using the docker:// transport.
Signed-off-by: Ashley Cui <acui@redhat.com>
Add a --artifact flag to `podman manifest add` which can be used to
create an artifact manifest for one or more files and attach it to a
manifest list. Corresponding --artifact-type, --artifact-config-type,
--artifact-config, --artifact-layer-type, --artifact-subject, and
--artifact-exclude-titles options can be used to fine-tune the fields in
the artifact manifest that don't refer to the files themselves.
Add a --index option to `podman manifest annotate` that will cause
values passed to the --annotation flag to be applied to the manifest
list as a whole instead of to an entry in the list.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Previously, the locks were on the provider layer, which doesn't make a vm operation with a config file update atomic. Move them up a layer, so the entire function locks while doing provider and config operations.
This adds a Remove and a Set function to the shim layer.
[NO NEW TESTS NEEDED] Unsure how to test this
Signed-off-by: Ashley Cui <acui@redhat.com>
Like docker podman network inspect should output the information of
running container with their ip/mac address on this network.
However the output format is not docker compatible as this cannot
include all the info we have and the previous output was already not
compatible so this is not new.
New example output:
```
[
{
...
"containers": {
"7c0d295779cee4a6db7adc07a99e635909413a390eeab9f951edbc4aac406bf1": {
"name": "c2",
"interfaces": {
"eth0": {
"subnets": [
{
"ipnet": "10.89.0.4/24",
"gateway": "10.89.0.1"
},
{
"ipnet": "fda3:b4da:da1e:7e9d::4/64",
"gateway": "fda3:b4da:da1e:7e9d::1"
}
],
"mac_address": "1a:bd:ca:ea:4b:3a"
}
}
},
"b17c6651ae6d9cc7d5825968e01d6b1e67f44460bb0c140bcc32bd9d436ac11d": {
"name": "c1",
"interfaces": {
"eth0": {
"subnets": [
{
"ipnet": "10.89.0.3/24",
"gateway": "10.89.0.1"
},
{
"ipnet": "fda3:b4da:da1e:7e9d::3/64",
"gateway": "fda3:b4da:da1e:7e9d::1"
}
],
"mac_address": "f6:50:e6:22:d9:55"
}
}
}
}
}
]
```
Fixes#14126
Fixes https://issues.redhat.com/browse/RHEL-3153
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Before, we required that the mount target exist and be a
directory for the 9p mount to successfully complete, which is not
how things are supposed to work - the user should be able to
mount anywhere. This should just be a simple mkdir, but with FCOS
the root directory is immutable so we need to undo that before we
can mkdir, and unfortunately we don't have a library that can do
chattr (and I didn't want to drag in a new dependency just for
that), so let's be gross and add it to the SSH command. I
aggressively dislike this but it does work.
[NO NEW TESTS NEEDED] Can worry about getting a more generic
mount test together for Machine later.
Signed-off-by: Matt Heon <mheon@redhat.com>
For a unix socket we should not trim this at all. The problem exists for
ssh only so make sure we only do this when a ssh URL is given.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make the logic here much simpler, we already pass all the conection info
before so just use the parsed URL here.
Fixes#20943
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Machine only works on amd64 and arm64 but the compose command can still
be used without machine so split out the machine only logic to make it
build for all arches.
[NO NEW TESTS NEEDED]
Fixes#21757
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There is no reason for us to use v2 here, we use v3 already in most
places. The go-openapi dependency still uses v2 so we do not get rid of
it yet but it looks like they migrated upstream so once a new version
is released there and finds our way to us then we should get some nice
binary size reduction.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We don't care about the provenance of the machine image, so this is no
longer applicable to have when displaying info.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Changes the order in which the machine-specific files are removed in
`Remove()`. Removes the system connections first, then removes the
`configPath` last. `configPath` is removed last, because in the case of
an error with any of the previous files, the removal can be attempted
again since the machine still "exists".
Made the errors in `Remove` hard errors instead of soft errors.
Added the implementation for the QEMU-specific file removal.
[NO NEW TESTS NEEDED]
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
ToHumanReadable() exists twice now, there is no reason for this just
call the function on the backend event type is fine as this still has to
be used there.
It also fixes a bug where the wrong event type was passed to the
template which did not match the docs and json output.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add new event type in cmd/podman to better match the docker format.
Signed-off-by: AhmedGrati <ahmedgrati1999@gmail.com>
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Adds `ConnectionInfo()` to the `MachineConfig` and fills out
`InspectInfo` accordingly. Additionally fixes the "inspect with go format" test.
Changes `ConfigPath` to `ConfigDir` to better represent the
output.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
