add the ability for users to specify more than one container at a time
while using podman logs. If more than one container is being displayed,
podman will also prepend a shortened container id of the container on
the log line.
also, enabled the podman-remote logs command during the refactoring of
the above ability.
fixes issue #2219
Signed-off-by: baude <bbaude@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Replaces 'skopeo-containers' with 'containers-common' in the files that
I feel comfortable changing it in. There are a number of rpm building
related files that still have it, but I was hesitant to do so.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Remove the word buildah from the man page and replace it
with podman. Cut and paste job gone bad apparently.
Fixes: #2639
Also: enforce noSubArgs for podman events
Also: remove unnecessary '[flags]' from Use message (Cobra
adds it automatically)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make the usage messages (and options) different between
podman inspect, podman image inspect, and podman container inspect.
Disable inapplicable options (-l, -s) for podman image inspect
Disable -t (type) when the type is implicit through the subcommand.
Update man page to reflect differences in usage.
Fix broken test.
Uglier than desirable due to Go and Cobra limitations
Signed-off-by: Ed Santiago <santiago@redhat.com>
integration of healthcheck into create and run as well as inspect.
healthcheck enhancements are as follows:
* add the following options to create|run so that non-docker images can
define healthchecks at the container level.
* --healthcheck-command
* --healthcheck-retries
* --healthcheck-interval
* --healthcheck-start-period
* podman create|run --healthcheck-command=none disables healthcheck as
described by an image.
* the healthcheck itself and the healthcheck "history" can now be
observed in podman inspect
* added the wiring for healthcheck history which logs the health history
of the container, the current failed streak attempts, and log entries
for the last five attempts which themselves have start and stop times,
result, and a 500 character truncated (if needed) log of stderr/stdout.
The timings themselves are not implemented in this PR but will be in
future enablement (i.e. next).
Signed-off-by: baude <bbaude@redhat.com>
In lipod, we now log major events that occurr. These events
can be displayed using the `podman events` command. Each
event contains:
* Type (container, image, volume, pod...)
* Status (create, rm, stop, kill, ....)
* Timestamp in RFC3339Nano format
* Name (if applicable)
* Image (if applicable)
The format of the event and the varlink endpoint are to not
be considered stable until cockpit has done its enablement.
Signed-off-by: baude <bbaude@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
With later changes of Podman, you can now use both the
--rm and --detach in a single run command. This PR removes
the documentation in the man pages saying this is not
allowed.
Fixes: #2601
allow to configure the path to the network-cmd binary, either via an
option flag --network-cmd-path or through the libpod.conf
configuration file.
This is currently used to customize the path to the slirp4netns
binary.
Closes: https://github.com/containers/libpod/issues/2506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
...caught by hack/podman-commands.sh script. Which had a little
buglet, which I fixed: add a special case for 'help', which
neither has nor needs a man page.
I believe the podman-commands.sh script is ready to be run in CI,
hint hint.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add the ability to manually run a container's healthcheck command.
This is only the first phase of implementing the healthcheck.
Subsequent pull requests will deal with the exposing the results and
history of healthchecks as well as the scheduling.
Signed-off-by: baude <bbaude@redhat.com>
In cases where a user issues the podman container runlabel
command and the image is not local, we now default to pulling
the image automatically to mimic the atomic cli behavior.
Fixes: BZ #1677905
Signed-off-by: baude <bbaude@redhat.com>
Found via:
for i in docs/*.md;do x=$(perl -ne 'if (/\[(podman-.*?)\(1\)\]\((podman-.*?)\.1\.md/) { print " $1 != $2\n" if $1 ne $2; print " ENOENT $2\n" unless -e "docs/$2.1.md" }' <$i); if [ -n "$x" ]; then echo $i; echo "$x";fi;done
...which is probably a good candidate for another CI hook,
except I have no idea how to rewrite it in awk.
Additionally, mark `podman refresh` and `podman container refresh`
as hidden, remove its man page, and remove references to it from
all other man pages.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Conceptually simple: include, where applicable, a brief
description of command-line options for each subcommand.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Allow adjusting number of locks in libpod.conf via an already
available knob we previously didn't expose in the default config
file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Make it easy for scripts to determine if an image removal
failure. If only errors were no such image exit with 1
versus 125.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Make it easy for scripts to determine if a container removal
fails versus the container did not exist.
If only errors were no such container exit with 1 versus 125.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If user specifies network namespace and the /etc/netns/XXX/resolv.conf
exists, we should use this rather then /etc/resolv.conf
Also fail cleaner if the user specifies an invalid Network Namespace.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Vendors in Buildah 1.7 into Podman.
Also the latest imagebuilder and changes for
`build --target`
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
in the case of the remote-client, it was decided to hide the latest
flag to avoid confusion for end-users on what the "last" container,
volume, or pod are.
Signed-off-by: baude <bbaude@redhat.com>
The original intent behind the requirement was to ensure that, if
two SHM lock structs were open at the same time, we should not
make such a runtime available to the user, and should clean it up
instead.
It turns out that we don't even need to open a second SHM lock
struct - if we get an error mapping the first one due to a lock
count mismatch, we can just delete it, and it cleans itself up
when it errors. So there's no reason not to return a valid
runtime.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
The fifth and final chunk of examples for the Cobra
examples in the CLI help output.
Also includes a few man page touchups.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Adds the third chunk of Cobra examples to the cli help.
As were putting together a release tomorrow, tried to
hit the heavy commands with this PR.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Prior, a pod would have to be started immediately when created, leading to confusion about what a pod state should be immediately after creation. The problem was podman run --pod ... would error out if the infra container wasn't started (as it is a dependency). Fix this by allowing for recursive start, where each of the container's dependencies are started prior to the new container. This is only applied to the case where a new container is attached to a pod.
Also rework container_api Start, StartAndAttach, and Init functions, as there was some duplicated code, which made addressing the problem easier to fix.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Adds examples to Cobra help for a second chunk of commands.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
