It qemu cannot be compiled anyway so make sure we do not try to compile
parts where the typechecker complains about on windows.
Also all the e2e test files are only used on linux as well.
pkg/machine/wsl also reports some error but to many for me to fix them
now. One minor problem was fixed in pkg/machine/machine_windows.go.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
when performing a system reset with containers that run somewhere where
a soft kill wont work (like sleep), containers will wait 10 seconds
before terminating with a sigkill. But for a forceful action like
system reset, we should outright set no timeout so containers stop
quickly and are not waiting on a timeout
Fixes#21874
Signed-off-by: Brent Baude <bbaude@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
Before this, for some special Podman commands (system reset,
system migrate, system renumber), Podman would create a first
Libpod runtime to do initialization and flag parsing, then stop
that runtime and create an entirely new runtime to perform the
actual task. This is an artifact of the pre-Podman 2.0 days, when
there was almost no indirection between Libpod and the CLI, and
we only used one runtime because we didn't need a second runtime
for flag parsing and basic init.
This system was clunky, and apparently, very buggy. When we
migrated to SQLite, some logic was introduced where we'd select a
different database location based on whether or not Libpod's
StaticDir was manually set - which differed between the first
invocation of Libpod and the second. So we'd get a different
database for some commands (like `system reset`) and they would
not be able to see existing containers, meaning they would not
function properly.
The immediate cause is obviously the SQLite behavior, but I'm
certain there's a lot more baggage hiding behind this multiple
Libpod runtime logic, so let's just refactor it out. It doesn't
make sense, and complicates the code. Instead, make Reset,
Renumber, and Migrate methods of the libpod Runtime. For Reset
and Renumber, we can shut the runtime down afterwards to achieve
the desired effect (no valid runtime after). Then pipe all of
them through the ContainerEngine so cmd/podman can access them.
As part of this, remove the SystemEngine part of pkg/domain. This
was supposed to encompass these "special" commands, but every
command in SystemEngine is actually a ContainerEngine command.
Reset, Renumber, Migrate - they all need a full Libpod and access
to all containers. There's no point to a separate engine if it
just wraps Libpod in the exact same way as ContainerEngine. This
consolidation saves us a bit more code and complexity.
Signed-off-by: Matt Heon <mheon@redhat.com>
Commit 1 of 2.
More easy ones: test files that either work with ExitCleanly()
or require very, very simple tweaks.
Signed-off-by: Ed Santiago <santiago@redhat.com>
There is no reason to define the same code every time in each file, just
use global nodes. This diff should speak for itself.
CleanupSecrets()/Volume() no longer call Cleanup() directly, as the
global AfterEach node will always call Cleanup() this is no longer
necessary. If one AfterEach() node fails it will still run the others.
Also always unset the CONTAINERS_CONF env vars. This prevents people
from forgetting to unset it. And fix the special CONTAINERS_CONF logic
in the system connection tests, we do not want to preserve
CONTAINERS_CONF anyway so just remove this logic.
Ginkgo orders the BeforeEach and AfterEach nodes. They will be executed
from the outer-most defined to inner-most. This means our global
BeforeEach is always first. Only then the inner one (in the Describe()
function in each file). For AfterEach it is inverted, from the inner to
the outer.
Also see https://onsi.github.io/ginkgo/#organizing-specs-with-container-nodes
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
USe the new ginkgo `Serial` decorator to make sure system reset is
never executed in parallel. system reset stops teh rootless pause
process which causes major issues when other process in parallel still
use this old namesapce.
Fixes#17903
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Since commit f250560a8043 the play kube command uses its own network.
this is racy be design because we create the network followed by
creating/running pod/containers. This means in the meantime another
prune or reset process could wipe out the network config because we have
to share the network config directory by design in the test.
The problem is we only have one host netns which is shared between
tests. If the network config dir is not shared we cannot make conflict
checks for interface names and ip address. This results in different
tests trying to use the same interface and/or ip address which will
cause runtime failures in CNI and netavark.
The only solution I see is to make sure only the reset/prune tests are
using a custom network dir. This makes sure they do not wipe configs
that are otherwise required by other parallel running tests.
Fixes#17946
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Unify the functions used to detect rootless to "isRootless()".
This function can detect to join the user namespace by mistake.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Only want to report if user created local customized storage in
/etc/containers/storage.conf or in
$HOME/.config/containers/storage.conf, when resetting storage.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Podman Machine crashes if run as root. When creating the machine, we write the ignition so that the UID of the core user matches the UID of the user on the host. We by default, create the root user on the machine with UID 0. If the user on the host is root, the core UID and the Root UID collide, causing a the VM not to boot.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
podman system reset did not clean up machines fully, leaving some config
files, and breaking machines. Now it removes all machines files fully.
Signed-off-by: Ashley Cui <acui@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman system prune should also remove all networks. When we want to
users to migrate to the new network stack we recommend to run podman
system reset. However this did not remove networks and if there were
still networks around we would continue to use cni since this was
considered an old system.
There is one exception for the default network. It should not be removed
since this could cause other issues when it no longer exists. The
network backend detection logic ignores the default network so this is
fine.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
in an effort to speed up the remote testing, we should be using
lookaside storage to avoid pull images as well as importing multiple
images into the RW store.
one test was removed and added into system test by Ed in #8325
Signed-off-by: baude <bbaude@redhat.com>
Now that Dan has added helpful comments to each SkipIfRemote,
let's take the next step and include those messages in the
Skip() output so someone viewing test results can easily
see if a remote test is skipped for a real reason or for
a FIXME.
This commit is the result of a simple:
perl -pi -e 's;(SkipIfRemote)\(\)(\s+//\s+(.*))?;$1("$3");' *.go
in the test/e2e directory, with a few minor (manual) changes
in wording.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Remove ones that are not needed.
Document those that should be there.
Document those that should be fixed.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
add system df, info, load, renumber, and migrate
Refactor for specialized libpod engines
add the ability to prune images, volumes, containers, and pods
Signed-off-by: baude <bbaude@redhat.com>
This command will destroy all data created via podman.
It will remove containers, images, volumes, pods.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
